1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and safety of your Graco Remi 4-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and use to ensure safe operation and proper functionality of the product.
Image 1.1: The Graco Remi 4-in-1 Convertible Crib and Changer, showcasing its integrated design with a crib, changing table, and storage drawer.
The Graco Remi is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed (conversion kits sold separately). It features an attached changing table with storage and a full-size under-crib storage drawer.
2. Safety Information
Your Graco Remi Convertible Crib and Changer is designed and manufactured to meet or exceed applicable safety standards. Adherence to the following safety guidelines is crucial for your child's well-being.
- GREENGUARD Gold Certified: This product has been screened for over 10,000 chemicals and VOCs known to pollute indoor air, contributing to a cleaner, healthier environment for your child.
- JPMA Certified: The product has been expert tested by third-party, accredited laboratories to meet or exceed all applicable category voluntary and mandatory safety standards.
- Always ensure all hardware is securely tightened. Periodically check for loose hardware, damaged parts, or sharp edges.
- Do not use the crib if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
- The crib may only be used until your child can easily climb out or is taller than 35 inches (89 cm).
- Use only a standard full-size crib and toddler mattress that fits snugly without gaps.
- Never place the crib near windows where cords from blinds or drapes could strangle a child.
- Do not use the changing table if your child exceeds the maximum weight recommendation (50 pounds) or can climb out unaided.
Image 2.1: The GREENGUARD Gold Certified logo, signifying low chemical emissions for improved indoor air quality.
Image 2.2: The JPMA Certified seal, confirming the product meets rigorous safety standards.
3. Product Components and Features
The Graco Remi 4-in-1 Convertible Crib and Changer is a versatile nursery solution crafted from pine wood, engineered wood, and wood composites. Key features include:
- 4-in-1 Conversion: Easily converts from a crib to a toddler bed, daybed, and full-size bed with headboard only.
- Integrated Changing Table: Features a water-resistant changing pad with a safety strap, three enclosed storage drawers, and two open shelves.
- Under-Crib Storage Drawer: A full-size drawer with two compartments provides additional storage for nursery essentials.
- Adjustable Mattress Support: Offers three different height options to accommodate your growing child.
Image 3.1: Key features of the Graco Remi, including adjustable mattress support, integrated storage, and changing table.
4. Assembly Instructions
Assembly of the Graco Remi 4-in-1 Convertible Crib and Changer is required. Please ensure you have all components and hardware before beginning. Refer to the detailed assembly guide included in your product packaging for step-by-step instructions and diagrams. It is recommended to assemble the unit in the room where it will be used.
- Unpack all components and verify against the parts list in your assembly guide.
- Use the provided hardware and tools as specified in the instructions.
- Ensure all connections are secure and stable before placing a child in the crib.
- The changing table drawers feature Euro drawer glides for smooth operation.
Image 4.1: The Graco Remi crib and changer fully assembled, ready for use.
5. Operating Instructions
The Graco Remi offers four configurations to accommodate your child's developmental stages.
Image 5.1: Visual representation of the 4-in-1 conversion capabilities of the Graco Remi.
5.1 Crib Configuration
The crib features an adjustable mattress support base with three height options. Adjust the mattress height to the lowest position once your child can sit up unassisted.
- Highest Position: For newborns and infants who cannot push up on their hands and knees.
- Middle Position: For infants who can push up on their hands and knees but cannot sit up unassisted.
- Lowest Position: For infants who can sit up unassisted or pull themselves to a standing position.
Image 5.2: Crib mattress support shown in the lowest position for child safety.
5.2 Toddler Bed Conversion
To convert the crib into a toddler bed, remove the front crib rail and install the compatible Graco Toddler Safety Guardrail (Model 01350-30 Series, sold separately). Ensure the mattress support is in the lowest position.
5.3 Daybed Conversion
For daybed configuration, remove the front crib rail. No guardrail is required for this stage. The mattress support should remain in the lowest position.
Image 5.3: The Graco Remi in daybed configuration.
5.4 Full-Size Bed Conversion
To convert to a full-size bed, the crib side rails and mattress support are removed, and the headboard is used with a compatible full-size bed conversion kit (sold separately). Follow the instructions provided with the conversion kit.
Image 5.4: The Graco Remi headboard as part of a full-size bed setup.
5.5 Changing Table Usage
The attached changing table includes a water-resistant changing pad with a safety strap. Always secure your child with the safety strap while using the changing table. The three enclosed drawers and two open shelves provide convenient storage for diapers, wipes, and other changing necessities.
Image 5.5: Detail of the changing table with its pad and storage drawers.
6. Maintenance and Care
Proper maintenance ensures the longevity and safety of your Graco Remi crib and changer.
- Cleaning: Wipe surfaces with a damp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish.
- Inspection: Regularly inspect all screws, bolts, and other hardware to ensure they are tight and secure. Tighten as necessary.
- Storage: If storing the product, ensure it is kept in a dry environment to prevent warping or damage to the wood.
7. Troubleshooting
If you encounter any issues with your Graco Remi, consider the following general troubleshooting steps:
- Loose Parts: If any part feels loose or wobbly, re-check the assembly instructions and tighten all corresponding hardware.
- Drawer Operation: If drawers are not sliding smoothly, ensure they are correctly aligned on their Euro glides and that no obstructions are present.
- Missing Components: If you believe parts are missing, refer to the parts list in your assembly manual and contact customer support.
- Conversion Issues: When converting the crib, ensure all previous configuration hardware is removed and new hardware (if applicable) is correctly installed according to the specific conversion instructions.
For persistent issues or concerns not addressed here, please contact Graco customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 04586-211 |
| Brand | Graco |
| Color | White |
| Material | Pine Wood, Engineered Wood, Wood Composites |
| Product Dimensions (L x W x H) | 71.77" x 29.53" x 35.94" |
| Item Weight | 105 Pounds |
| Maximum Weight Recommendation (Changing Table) | 50 Pounds |
| Maximum Height Recommendation (Crib) | 35 Inches (89 cm) |
| Certifications | GREENGUARD Gold Certified, JPMA Certified |
| Assembly Required | Yes |
| Care Instructions | Wipe with Damp Cloth |
Image 8.1: Product dimensions for the Graco Remi 4-in-1 Convertible Crib and Changer.
9. Warranty and Support
Your Graco Remi 4-in-1 Convertible Crib and Changer is backed by a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, replacement parts, or technical assistance, please contact Graco customer support. Keep your proof of purchase for warranty validation.
- Refer to the contact information provided in your product packaging or visit the official Graco website for support details.
