1. Product Overview
The Jaclo B732-PN Pissaro Retro Showerhead is designed to provide a classic aesthetic with modern functionality. This fixed showerhead features a polished nickel finish and a round shape, complementing various bathroom decors. It is constructed from durable nickel material, ensuring longevity and reliable performance.
Image 1.1: The Jaclo B732-PN Pissaro Retro Showerhead, showcasing its polished nickel finish and multiple spray nozzles.
Key features include:
- Style: Retro design
- Finish: Polished Nickel
- Material: Nickel construction
- Shape: Round
- Dimensions: Approximately 4 x 4 x 4.5 inches
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage or personal injury.
- Always turn off the main water supply before beginning any installation or maintenance.
- Wear appropriate personal protective equipment, such as safety glasses, during installation.
- Ensure all connections are secure to prevent leaks.
- Do not overtighten connections, as this may damage the product or plumbing.
- If you are unsure about any part of the installation process, consult a qualified plumber.
3. Package Contents
Verify that all components are present before beginning installation. The package should contain:
- Jaclo B732-PN Pissaro Retro Showerhead (1 unit)
- Installation Guide (this document)
- Note: Additional plumbing components such as shower arms or wall flanges are typically sold separately.
4. Installation Instructions
Follow these steps to properly install your Jaclo B732-PN Pissaro Retro Showerhead.
- Prepare the Area: Turn off the main water supply to your home. Remove any existing showerhead by unscrewing it counter-clockwise from the shower arm. Clean any old sealant or debris from the shower arm threads.
- Apply Thread Sealant: Wrap plumber's tape (PTFE tape) clockwise around the threads of the shower arm 3-4 times. Ensure the tape is applied smoothly and covers all threads.
- Attach Showerhead: Carefully thread the Jaclo B732-PN Pissaro Retro Showerhead onto the shower arm by turning it clockwise. Hand-tighten until snug.
- Final Tightening: Using an adjustable wrench, gently tighten the showerhead an additional quarter to half turn. Do not overtighten, as this can damage the threads or the showerhead.
- Check for Leaks: Turn the main water supply back on. Turn on the shower and check for any leaks around the connection point. If leaks occur, turn off the water, re-tighten slightly, or reapply plumber's tape.
5. Operation
The Jaclo B732-PN Pissaro Retro Showerhead is a fixed showerhead designed for a single spray pattern. To operate, simply turn on your shower's hot and cold water supply valves to achieve your desired water temperature and flow.
The showerhead features multiple nozzles that deliver a consistent and invigorating spray. There are no adjustable spray settings on this model.
6. Maintenance and Cleaning
Regular cleaning will help maintain the appearance and performance of your showerhead.
- General Cleaning: Clean the showerhead regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or chemical cleaners containing ammonia, bleach, or acids, as these can damage the polished nickel finish.
- Mineral Deposit Removal: If mineral deposits (limescale) accumulate on the nozzles, gently rub them with your finger or a soft brush to dislodge the deposits. For stubborn deposits, a solution of white vinegar and water (50/50) can be applied with a soft cloth, left for a few minutes, then rinsed thoroughly.
7. Troubleshooting
Refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Mineral buildup in nozzles or internal components. | Clean the showerhead nozzles as described in Section 6. Check for debris in the shower arm. |
| Leaking at Connection | Improperly applied plumber's tape or loose connection. | Turn off water, remove showerhead, reapply plumber's tape, and re-tighten securely (refer to Section 4). |
| Uneven Spray Pattern | Blocked nozzles due to mineral deposits. | Clean individual nozzles to remove mineral buildup (refer to Section 6). |
If the issue persists after attempting these solutions, please contact Jaclo customer support.
8. Specifications
Detailed technical specifications for the Jaclo B732-PN Pissaro Retro Showerhead:
- Model Number: B732-PN
- Brand: Jaclo
- Style: Retro
- Shape: Round
- Material: Nickel
- Finish Type: Polished Nickel
- Product Dimensions: 4 x 4 x 4.5 inches (Length x Width x Height)
- Item Weight: 2.98 pounds
- Manufacturer: Standard Plumbing Supply
- UPC: 020111034879
Image 8.1: Representation of the Polished Nickel finish, which is applied to the Jaclo B732-PN showerhead.
9. Warranty and Support
For warranty information or technical support regarding your Jaclo B732-PN Pissaro Retro Showerhead, please refer to the official Jaclo website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.
Jaclo Customer Service: Please visit www.jaclo.com for contact details and further assistance.
