Teac PD-D1200 Multi Disc 5 Disc CD Changer Player User Manual

1. Introduction

Thank you for purchasing the Teac PD-D1200 Multi Disc 5 Disc CD Changer Player. This manual provides essential information for the proper setup, operation, and maintenance of your new audio component. Please read this manual thoroughly before using the unit to ensure optimal performance and safety.

2. Safety Information

Always observe the following basic safety precautions when using this product:

• Do not expose the unit to rain or moisture.
• Do not block any ventilation openings.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Protect the power cord from being walked on or pinched.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel.

3. Package Contents

Verify that all items listed below are included in your package:

• Teac PD-D1200 Multi Disc 5 Disc CD Changer Player
• Remote Control
• User Manual (this document)

4. Product Overview

4.1 Front Panel

This image displays the front of the Teac PD-D1200 Multi Disc CD Changer, along with its remote control. Key features visible include the disc tray, display screen showing track and time information, and control buttons such as POWER, SHUFFLE PLAY, OPEN/CLOSE, DISC SKIP, PLAY, STOP, PAUSE, and SKIP (forward/backward).

• POWER Button: Turns the unit on or off.
• Disc Tray: Holds up to 5 CDs.
• Display Screen: Shows track number, elapsed time, and playback status.
• OPEN/CLOSE Button: Opens and closes the disc tray.
• DISC SKIP Button: Rotates the disc carousel to select a different disc.
• PLAY Button: Starts playback.
• PAUSE Button: Temporarily stops playback.
• STOP Button: Stops playback.
• SKIP Buttons (◀◀/▶▶): Skips to the previous or next track.
• SHUFFLE PLAY Button: Initiates random playback of tracks.

4.2 Rear Panel

This image shows the rear panel of the Teac PD-D1200 CD Changer. It features the audio output jacks (RCA L/R), the CD SYNC connection for compatible Teac components, and the AC power input. Various regulatory labels and warnings are also visible.

• AUDIO OUT (L/R): RCA stereo audio output jacks for connecting to an amplifier or receiver.
• CD SYNC: Connection for synchronized recording with compatible Teac cassette decks or recorders.
• AC IN: Power cord input.

4.3 Remote Control

The included remote control allows for convenient operation of all major functions from a distance. It features buttons for power, disc selection, track navigation, playback control (play, pause, stop), shuffle, and program functions.

5. Setup

5.1 Placement

Place the CD changer on a stable, level surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure adequate ventilation around the unit.

5.2 Connecting to an Audio System

1. Ensure your amplifier/receiver and the CD changer are turned off.
2. Connect the RCA audio cables (not included) from the AUDIO OUT (L/R) jacks on the rear of the PD-D1200 to an available audio input (e.g., "CD" or "AUX") on your amplifier/receiver.
3. If you have a compatible Teac cassette deck, you can connect it to the CD SYNC port for synchronized recording.

5.3 Power Connection

After all audio connections are made, plug the power cord into the AC IN port on the rear of the unit, and then plug the other end into a standard AC wall outlet.

6. Operating Instructions

6.1 Loading Discs

1. Press the POWER button to turn on the unit.
2. Press the OPEN/CLOSE button. The disc tray will open.
3. Place up to five CDs onto the disc tray, ensuring they are seated correctly with the label side facing up.
4. Press the OPEN/CLOSE button again to close the disc tray. The unit will read the discs.

6.2 Basic Playback

• To Play: Press the PLAY button. Playback will begin from the first track of the currently selected disc.
• To Pause: Press the PAUSE button during playback. Press again to resume.
• To Stop: Press the STOP button.
• To Skip Tracks: Press the SKIP (▶▶) button to go to the next track. Press the SKIP (◀◀) button to go to the beginning of the current track, or press twice to go to the previous track.
• To Select a Disc: Press the DISC SKIP button to rotate the carousel and select a different loaded disc.

6.3 Shuffle Play

Press the SHUFFLE PLAY button on the front panel or remote control to play tracks in a random order from all loaded discs. Press it again to deactivate shuffle play.

6.4 Using the Remote Control

Point the remote control directly at the front panel of the CD changer. Ensure there are no obstructions between the remote and the unit. Replace batteries when the remote's range decreases or it stops responding.

7. Maintenance

• Cleaning the Unit: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Disc Handling: Always handle CDs by their edges. Avoid touching the playing surface. Store discs in their cases when not in use to prevent scratches and dust accumulation.
• Lens Cleaning: Do not attempt to clean the internal laser lens yourself. If playback issues persist, consult a qualified service technician.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official Teac website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.

Teac Official Website: https://teac.jp/int/