Serta Comfort Plush Electric Heated Blanket Model 0916 User Manual

Introduction

Thank you for choosing the Serta Comfort Plush Electric Heated Blanket, Model 0916. This manual provides essential information for the safe and efficient use, setup, operation, and maintenance of your heated blanket. Please read all instructions carefully before use and retain this manual for future reference.

Image: Serta Comfort Plush Electric Heated Blanket, folded, showcasing its soft texture and integrated controller.

Important Safety Information

To reduce the risk of burns, electric shock, fire, or injury, this product must be used in accordance with the following instructions:

• Do not use with an infant, child, incapacitated person, or anyone insensitive to heat.
• Do not use with or on an animal.
• Never use the blanket if the cord or plug is damaged.
• Do not use with pointed objects.
• Do not use if wet.
• Always unplug the blanket when not in use.
• Do not use with other heating devices.
• Ensure the controller is not covered or placed under the blanket during use to prevent overheating.
• This blanket is equipped with overheat protection and an automatic shut-off feature after 10 hours for safety.

Setup Instructions

1. Unpacking and Inspection

Carefully remove the blanket and controller(s) from the packaging. Inspect the blanket, power cord, and controller(s) for any signs of damage. Do not use if any components are damaged.

2. Placement on Bed

Lay the heated blanket flat on your bed, ensuring it is evenly spread and not bunched or folded. The blanket should be placed directly on top of your fitted sheet.

Image: The Serta Comfort Plush Electric Heated Blanket laid out on a bed, ready for use.

3. Connecting the Controller(s)

Locate the connector on the blanket. Firmly plug the controller cord into the blanket connector. For Queen and King sizes, two controllers are provided for dual zone control. Ensure both controllers are securely connected. Plug the power cord(s) into a 120V AC electrical outlet.

Image: A close-up view of the programmable digital controller, showing its display and buttons.

Operating Instructions

1. Power On/Off

Press the POWER button on the digital controller to turn the blanket on or off. The display will illuminate when the blanket is on.

2. Setting Heat Level

Your blanket features 10 heat settings. Use the TEMP + and TEMP - buttons to adjust the desired heat level. Start with a lower setting and increase as needed for comfort.

3. Setting the Timer

The programmable timer allows you to set the operating duration from 30 minutes up to 12 hours. Press the TIMER + or TIMER - buttons to select your preferred shut-off time. The blanket will automatically turn off after the set time.

4. Preheat Function

The Serta preheat technology quickly warms your bed to your selected heat setting. This function activates automatically when the blanket is turned on.

5. Dual Zone Control (Queen/King Sizes)

Queen and King size blankets include two digital controllers, allowing individual temperature adjustment for each side of the bed. Each user can set their preferred heat and timer settings independently.

Image: An illustration demonstrating the dual zone heating capability, showing different temperature settings for each side of the bed.

Product Overview Video

Maintenance and Care

1. Washing Instructions

The Serta Comfort Plush Electric Heated Blanket is machine washable and dryer safe.

1. Always unplug the controller(s) from the blanket and the wall outlet before washing.
2. Machine wash on a gentle cycle with cold water.
3. Do not bleach or iron.
4. Tumble dry on low heat or air dry. Ensure the blanket is completely dry before reconnecting the controller(s) and using.
5. Always refer to the care label attached to the blanket for specific instructions.

2. Storage

When not in use, store the blanket in a cool, dry place. Avoid folding the blanket tightly or placing heavy objects on it, which could damage the internal wiring.

Troubleshooting

If your heated blanket is not functioning as expected, please refer to the following common issues and solutions:

• Blanket Not Heating: Ensure the power cord is securely plugged into a working electrical outlet and the controller is firmly connected to the blanket. Check if the controller display is on.
• Controller Display Not Working: Verify the power connection. Try plugging into a different outlet.
• Uneven Heating: Ensure the blanket is spread flat on the bed without any folds or bunches.
• Automatic Shut-off: The blanket has a built-in 10-hour automatic shut-off feature. If it turns off before your set timer, check the timer setting.
• Error Codes: If an error code appears on the controller display, unplug the blanket from the wall outlet for a few minutes, then plug it back in. If the error persists, contact customer support.

If these steps do not resolve the issue, please contact customer support for further assistance.

Product Specifications

Energy Saving Tips

Using your Serta heated blanket can help reduce your energy consumption. By turning down your home thermostat by 10-15 degrees Fahrenheit for 8 hours, you can save 5-15% on your energy bills annually.

Image: A chart illustrating potential monthly savings on heating costs by lowering your home thermostat.

Warranty and Support

Manufacturer's Warranty

This Serta Comfort Plush Electric Heated Blanket comes with a 3-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, concerns, or warranty claims, please contact the manufacturer's customer support. Refer to the product packaging or the manufacturer's official website for contact details.