1. Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Z-Lite 169-4V-BN 4-Light Brushed Nickel Vanity fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation is essential for your safety and the optimal performance of this product.
The Z-Lite 169-4V-BN is a modern 4-light vanity fixture featuring bent frosted glass shades and brushed nickel hardware, designed for indoor use in bathrooms and similar environments. It operates on 120 Volts and uses E12 base incandescent bulbs, with a maximum wattage of 60 watts per bulb.
2. Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only. Do not expose to direct water spray or submersion.
- Ensure the mounting surface can support the weight of the fixture.
- Use only the specified bulb type and wattage (E12 base, max 60 watts incandescent). Exceeding the maximum wattage may cause overheating and damage to the fixture or create a fire hazard.
- Do not attempt to modify the fixture. Any modifications may void the warranty and create safety hazards.
- Handle glass components with care to prevent breakage.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact Z-Lite customer support for assistance.
- 1x Z-Lite 169-4V-BN 4-Light Vanity Fixture (includes housing, wiring, and lamp holders)
- 4x Frosted Glass Shades
- Mounting Hardware (e.g., mounting bracket, screws, wire nuts)
- Instruction Manual
Image 1: The Z-Lite 169-4V-BN 4-Light Brushed Nickel Vanity Fixture with its four frosted glass shades.
4. Installation Instructions
Professional installation is recommended. If you are not confident in your ability to install this fixture, please consult a qualified electrician.
- Prepare for Installation: Turn off the main power supply at the circuit breaker or fuse box to avoid electrical shock. Ensure the power is off before proceeding.
- Remove Old Fixture (if applicable): Carefully remove any existing light fixture from the wall. Disconnect all wiring and remove the old mounting bracket.
- Install Mounting Bracket: Attach the new mounting bracket (provided) to the electrical junction box in the wall using the screws provided. Ensure the bracket is securely fastened and level.
- Make Electrical Connections: Connect the fixture's wires to the corresponding wires from the junction box.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box and to the mounting bracket.
- Mount the Fixture: Align the fixture's base with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall and stable.
- Install Glass Shades: Carefully attach each frosted glass shade to the fixture according to the design. Typically, these slide into place or are secured with small screws or clips.
- Install Light Bulbs: Screw in four E12 base incandescent bulbs (not included) into the lamp holders. Do not exceed the maximum wattage of 60 watts per bulb.
- Restore Power: Once installation is complete and all components are securely in place, restore power at the circuit breaker or fuse box. Test the fixture to ensure it functions correctly.
Image 2: The Z-Lite 169-4V-BN vanity light installed above a mirror in a contemporary bathroom setting.
5. Operating Instructions
The Z-Lite 169-4V-BN vanity light is operated via a standard wall switch (not included). Once installed and wired correctly, simply toggle the wall switch to turn the light fixture ON or OFF.
6. Maintenance and Care
- Cleaning: To clean the fixture, ensure the power is off and the fixture is cool. Wipe with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Bulb Replacement: Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely. Carefully unscrew old bulbs and replace with new E12 base incandescent bulbs, not exceeding 60 watts per bulb.
- Glass Shade Care: The frosted glass shades can be removed for cleaning if necessary. Wash with mild soap and water, rinse thoroughly, and dry completely before reattaching.
7. Troubleshooting
If you experience issues with your Z-Lite 169-4V-BN vanity light, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. | Check circuit breaker or fuse. Ensure wall switch is ON. |
| Light does not turn on. | Loose wire connection. | Turn off power at breaker. Check all wire connections inside the junction box and fixture. Re-secure if loose. |
| Light does not turn on. | Defective bulb. | Replace bulb with a new one of the correct type and wattage. |
| Light flickers. | Loose bulb or connection. | Ensure bulbs are screwed in tightly. Turn off power and check wire connections. |
| Light flickers. | Incorrect dimmer switch (if applicable). | Ensure dimmer switch is compatible with incandescent bulbs. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Z-Lite |
| Model Number | 169-4V-BN |
| Color | Brushed Nickel |
| Material | Alloy Steel (Fixture), Glass (Shades) |
| Style | Modern |
| Light Fixture Form | Vanity |
| Room Type | Bathroom |
| Product Dimensions | 5"L x 30.66"W x 7"H (approximate) |
| Indoor/Outdoor Usage | Indoor |
| Power Source | Corded Electric |
| Installation Type | Surface Mount |
| Light Source Type | Incandescent |
| Finish Type | Brushed |
| Shade Material | Glass |
| Number of Light Sources | 4 |
| Voltage | 120 Volts |
| Bulb Base | E12 |
| Maximum Compatible Wattage | 60 Watts per bulb |
| Assembly Required | Yes |
| Item Weight | 9.92 Pounds |
| UPC | 685659050981 |
| Certification | UL Listed |
9. Warranty Information
This Z-Lite product is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the documentation included with your purchase or contact Z-Lite customer support directly. Keep your proof of purchase for warranty validation.
10. Customer Support
If you have any questions, require technical assistance, or need to report missing/damaged parts, please contact Z-Lite customer support. Refer to the Z-Lite official website or your purchase documentation for the most current contact information.
