1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the ClearOne WS800 M586 6-Inch Wireless Gooseneck Microphone. This device is designed for professional audio conferencing environments, offering seamless integration with Dante-enabled systems.
2. Product Overview
The ClearOne WS800 M586 is a 6-inch wireless gooseneck microphone, part of the WS800 series. It is engineered to interoperate with other Dante devices and is optimized for use with ClearOne CONVERGE Pro and INTERACT Pro products.
Figure 1: ClearOne WS800 M586 6-Inch Wireless Gooseneck Microphone. This image shows the black gooseneck microphone attached to its base unit, featuring the ClearOne logo and a small red indicator light.
2.1 Key Features
- Dante network compatibility for seamless integration.
- Optimized for ClearOne CONVERGE Pro and INTERACT Pro systems.
- Wireless operation for flexible placement.
- 6-inch gooseneck design for precise microphone positioning.
3. Setup
3.1 Unpacking
Carefully remove all components from the packaging. Verify that all items listed in the packing slip are present.
3.2 Component Identification
- WS800 M586 Gooseneck Microphone
- Microphone Base Unit
- Power Adapter (if applicable)
3.3 Initial Connection
- Insert the gooseneck microphone into the designated port on the microphone base unit. Ensure it is securely seated.
- Connect the power adapter to the base unit and then to a power outlet.
- Refer to your Dante network configuration guide for integrating the microphone into your existing audio system.
4. Operating Instructions
4.1 Powering On/Off
To power on the microphone, ensure the base unit is connected to power. The microphone will automatically power on when the base unit receives power. To power off, disconnect the base unit from the power source.
4.2 Microphone Placement
Position the gooseneck microphone approximately 6-12 inches (15-30 cm) from the speaker's mouth for optimal audio capture. Adjust the gooseneck to direct the microphone capsule towards the sound source.
4.3 Mute Function
If the base unit includes a mute button, press it to toggle the microphone's audio output. An indicator light (often red) typically signifies that the microphone is muted.
5. Maintenance
5.1 Cleaning
Use a soft, dry cloth to clean the exterior of the microphone and base unit. Do not use liquid cleaners or solvents, as these may damage the device.
5.2 Storage
When not in use for extended periods, store the microphone in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No audio output | Microphone not powered; Muted; Incorrect Dante routing | Check power connection; Unmute microphone; Verify Dante network configuration |
| Poor audio quality | Incorrect placement; Interference | Adjust microphone position; Check for nearby electronic devices causing interference |
7. Specifications
- Model: M586
- Part Number: 910-6002-065-C
- Type: Wireless Gooseneck Microphone
- Length: 6 Inch
- Connectivity: Dante Wireless
- Compatibility: ClearOne CONVERGE Pro, INTERACT Pro, and other Dante devices
8. Warranty and Support
For warranty information and technical support, please refer to the official ClearOne website or contact ClearOne customer service. Keep your purchase receipt for warranty claims.
ClearOne Support: https://www.clearone.com/support