1. Product Overview
The VETRO NO.19 Color Gel VL294 Pigment Yellow is a high-quality gel designed for professional nail art applications. It offers exceptional color depth and is part of a collection featuring over 300 rich color variations. This specific gel is formulated to meet the diverse color and texture demands of nail technicians, providing three distinct textures to suit various artistic specifications. It is a premium color collection.
Image of the VETRO NO.19 Color Gel bottle, 4ml, in Pigment Yellow (VL294).
Key Features:
- High-quality pigment for vibrant, lasting color.
- Formulated for professional nail art.
- Part of a collection offering diverse textures and colors.
2. Safety Information
Please read and understand all safety precautions before using this product. This product is intended for professional use only.
- Avoid Skin Contact: Direct contact with skin may cause irritation or allergic reactions. Use gloves and avoid contact with eyes. In case of contact, rinse immediately with plenty of water and seek medical advice.
- Ventilation: Use in a well-ventilated area to minimize inhalation of fumes.
- Flammability: Keep away from heat, open flames, and sources of ignition.
- Storage: Store in a cool, dark place, away from direct sunlight and UV/LED light sources. Keep the container tightly closed when not in use.
- Keep Out of Reach of Children: This product is not a toy. Keep it out of reach of children and pets.
- Disposal: Dispose of product and packaging in accordance with local regulations.
3. Setup and Preparation
Proper preparation is crucial for optimal gel adhesion and longevity.
- Sanitize: Sanitize hands and tools thoroughly.
- Nail Preparation: Gently push back cuticles and carefully remove any non-living tissue. Lightly buff the natural nail surface to remove shine and create a suitable texture for adhesion.
- Cleanse: Wipe the nail surface with a lint-free wipe saturated with a nail cleanser or dehydrator to remove dust and oils.
- Base Coat Application: Apply a thin, even layer of VETRO Base Gel. Cure according to the base gel's instructions (typically 30-60 seconds under LED or 60-120 seconds under UV light).
4. Operating Instructions (Application)
Follow these steps for applying VETRO NO.19 Color Gel VL294 Pigment Yellow:
- Stir Gel: Gently stir the color gel with a clean spatula or brush to ensure pigments are evenly distributed. Avoid vigorous stirring to prevent air bubbles.
- First Color Layer: Apply a very thin, even layer of VETRO NO.19 Color Gel VL294 to the prepared nail, avoiding the cuticle area and sidewalls. Cap the free edge.
- Cure First Layer: Cure the first layer under a UV/LED lamp. Refer to your lamp's specifications for exact curing times, typically 30 seconds for LED or 60 seconds for UV.
- Second Color Layer: Apply a second thin, even layer of the color gel for full opacity and vibrancy.
- Cure Second Layer: Cure the second layer under a UV/LED lamp for the recommended time.
- Top Coat Application: Apply a thin layer of VETRO Top Gel over the cured color layers. Cap the free edge.
- Cure Top Coat: Cure the top coat under a UV/LED lamp according to the top gel's instructions.
- Wipe (if necessary): If using a wipe-off top coat, remove the tacky inhibition layer with a lint-free wipe saturated with VETRO Cleanser.
5. Maintenance and Storage
Proper care and storage will extend the life of your VETRO Color Gel.
- Storage Conditions: Store the gel in its original container in a cool, dark place, away from direct sunlight, heat, and any UV/LED light sources.
- Seal Tightly: Always ensure the cap is tightly sealed after each use to prevent air exposure and premature curing.
- Avoid Contamination: Use clean tools to prevent contamination of the gel.
- Shelf Life: While unopened gels have a long shelf life, once opened, it is recommended to use them within 12-24 months for best performance.
6. Troubleshooting
Common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Gel not curing properly (tacky, soft) | Too thick layers, insufficient curing time, weak lamp, old lamp bulbs. | Apply thinner layers. Increase curing time. Check lamp wattage and replace bulbs if necessary. |
| Bubbles in gel | Vigorous stirring, applying too much pressure with brush, air trapped during application. | Gently stir gel. Apply with light, even strokes. Allow gel to self-level before curing. |
| Chipping or lifting | Improper nail preparation, gel on cuticles/sidewalls, insufficient capping of free edge, incompatible products. | Ensure thorough nail prep. Keep gel off skin. Properly cap the free edge. Use VETRO system products. |
| Uneven color application | Gel not stirred, uneven layers, brush marks. | Stir gel thoroughly. Apply in thin, even layers. Use a high-quality gel brush. |
7. Specifications
- Product Model Number: VL294
- Brand: VETRO
- Product Form: Gel
- Color: Pigment Yellow
- Contents Volume: 4ml
- Product Dimensions (W x D x H): Approximately 45mm x 45mm x 40mm
- ASIN: B011989STK
8. Warranty and Support
Specific warranty information for the VETRO NO.19 Color Gel VL294 Pigment Yellow is not provided in the product details. For detailed warranty terms, product support, or any inquiries, please refer to the official VETRO website or contact your authorized VETRO distributor.
For further assistance, please visit the VETRO Brand Store on Amazon or the manufacturer's official website.