Product Overview
The Stack-On Personal Safe PS-1514 provides secure storage for valuables, firearms, and important documents. It features a robust steel construction, an electronic lock for quick access, and a backup key for emergencies. The safe is designed for home or office use and includes pre-drilled holes for secure mounting. This safe is a California-approved Firearm Safety Device, meeting the requirements of Penal Code section 23655 and related regulations.
Image: The Stack-On Personal Safe PS-1514 in a closed position, showcasing its electronic keypad and solid black exterior.
Image: The Stack-On Personal Safe PS-1514 with its door open, revealing the interior space and the two live-action locking bolts.
Setup Instructions
Unpacking
Carefully remove the safe from its packaging. Inspect for any damage. Retain all packaging materials until you are satisfied with the product.
Battery Installation
The electronic lock requires 4 AA batteries (included). Locate the battery compartment on the inside of the safe door. Open the compartment, insert the batteries according to the polarity indicators (+/-), and close the cover securely.
Image: Interior view of the safe showing a foam-padded shelf and various items, with the electronic lock's internal components visible on the door.
Important Note:
- Ensure batteries are inserted correctly.
- Use only new, high-quality alkaline batteries.
- Do not mix old and new batteries or different battery types.
Setting Your Personal Combination
With the safe door open:
- Press the red reset button located on the inside of the safe door, near the hinge. The safe will beep, and the yellow light on the keypad will illuminate.
- Enter your desired 3-8 digit combination on the keypad.
- Press the "A" or "B" button (or checkmark/star button, depending on model) to confirm. The safe will beep twice, and the yellow light will turn off, indicating the new combination is set.
- Test the new combination several times with the door open before closing it.
Mounting the Safe
For enhanced security, it is recommended to mount the safe to a solid surface. The safe features pre-drilled holes in the bottom and back. Fastening hardware is included.
- Choose a secure location (e.g., floor, wall, shelf).
- Mark the drilling points through the pre-drilled holes in the safe.
- Drill pilot holes into the chosen surface.
- Align the safe and secure it using the provided hardware.
Image: The safe securely placed on a wooden shelf, demonstrating a typical mounting scenario within a closet or cabinet.
Operating Instructions
Opening the Safe with Electronic Lock
- Enter your personal 3-8 digit combination.
- Press the "A" or "B" button (or checkmark/star button).
- If the combination is correct, the green light will illuminate, and you will hear a click. Turn the handle clockwise within 5 seconds to open the door.
Using the Backup Key
In case of battery failure or forgotten combination, the backup key can be used.
- Remove the cover plate from the center of the electronic keypad.
- Insert the backup key into the keyhole and turn it clockwise.
- While holding the key turned, rotate the handle clockwise to open the safe.
- Once open, replace the batteries if needed and reset the combination.
Turning Keypad Beeps On/Off
The keypad has an audible feedback feature. To toggle the beeps:
- Press the megaphone button on the keypad to turn the beeps on or off.
Interior Light Operation
The safe is equipped with an interior LED light for visibility.
- The light typically activates automatically when the door is opened and sufficient ambient light is not detected, or it may have a manual switch depending on the specific model.
Image: The safe's interior illuminated by the built-in LED light, showcasing stored items like a handgun, ammunition, and keys.
Maintenance
Battery Replacement
Replace the 4 AA batteries annually or immediately if the keypad lights dim or the safe fails to open. Although the safe includes a backup key, regular battery replacement is crucial to avoid being locked out. The battery compartment is located inside the door.
Warning:
- The electronic lock can drain batteries quickly.
- There is no low battery warning. Replace batteries proactively.
Cleaning
Wipe the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Checking Mounting
Periodically check the mounting bolts to ensure they remain tight and secure, especially if the safe is frequently accessed or moved.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Safe does not open with combination. |
|
|
| Keypad is unresponsive or lights are dim. |
|
|
| Backup key does not open the safe. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Stack-On |
| Model Number | PS-1514 |
| Product Dimensions | 7.7"D x 13.5"W x 9.5"H |
| Lock Type | Electronic with Backup Key |
| Material | Alloy Steel |
| Color | Black |
| Item Weight | 20 Pounds |
| Mounting Type | Floor Mount, Wall Mount (hardware included) |
| Batteries Required | 4 AA (included) |
| Special Features | Interior Light, Foam-Padded Shelf, Pry-Resistant Door |
| UPC | 085529018149, 085529151402 |
Image: Diagram illustrating the external dimensions of the Stack-On Personal Safe: 13.5 inches width, 9.5 inches height, and 7.7 inches depth.
Warranty and Support
For warranty information, technical support, or to order replacement parts (such as backup keys), please contact Stack-On customer service directly. Refer to the contact information provided with your product packaging or visit the official Stack-On website.
It is recommended to register your product upon purchase to facilitate any future support needs.
