Introduction
The Escape AquaJam AJ2 is a versatile, extreme-climate, and waterproof wireless speaker system designed for various environments. Its robust construction allows it to float and withstand submersion up to 1 meter, making it suitable for use near water, in the snow, or during outdoor activities. This manual provides essential instructions for setting up, operating, maintaining, and troubleshooting your AquaJam AJ2 speaker.
Package Contents
Please verify that all items listed below are included in your package:
- AquaJam AJ2 Waterproof Bluetooth Speaker
- USB Charging Cable
- Bike Handlebar Mount
- 3M Multi-Purpose Mount
- Carabiner Clip
- Wrist Strap
Image: All items included in the AquaJam AJ2 speaker package, laid out on a white surface. This includes the yellow speaker, a USB charging cable, a bike mount, a 3M adhesive mount, a carabiner, and a wrist strap.
Product Overview
The AquaJam AJ2 features intuitive controls and a durable design. Familiarize yourself with the speaker's layout:
Image: A close-up view of the yellow AquaJam AJ2 speaker, highlighting the control panel. The panel includes buttons for power, volume up/next track, volume down/previous track, and play/pause/call answer. An important waterproof seal notice is visible on the side.
Control Panel Functions:
- Power Button: Press and hold to turn the speaker on or off.
- Play/Pause/Call Button: Press to play or pause audio. Press to answer or end a phone call.
- Volume Up / Next Track Button: Press to increase volume. Press and hold to skip to the next track.
- Volume Down / Previous Track Button: Press to decrease volume. Press and hold to go to the previous track.
- Charging Port: Located under a sealed cap. Ensure the cap is securely closed before exposing the speaker to water.
Setup
1. Charging the Speaker
- Locate the charging port on the side of the speaker, usually protected by a rubber cap.
- Carefully open the rubber cap to expose the micro USB port.
- Connect the small end of the provided USB charging cable to the speaker's port.
- Connect the larger end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate. Charging typically takes 2-3 hours for a full charge.
- Once fully charged, disconnect the cable and ensure the rubber cap is securely closed to maintain waterproof integrity.
2. Bluetooth Pairing
- Ensure the speaker is charged and powered off.
- Press and hold the Power button until you hear an audible prompt and the LED indicator begins to flash, indicating it is in pairing mode.
- On your smartphone, tablet, or other Bluetooth-enabled device, go to the Bluetooth settings.
- Search for available devices. You should see "AquaJam AJ2" or a similar name appear in the list.
- Select "AquaJam AJ2" to initiate the pairing process.
- Once paired, you will hear a confirmation sound, and the LED indicator will stop flashing and remain solid.
- The speaker is now ready to play audio from your device.
Operating Instructions
Power On/Off
- To Power On: Press and hold the Power button for approximately 3 seconds.
- To Power Off: Press and hold the Power button for approximately 3 seconds.
Playing Audio
- Ensure the speaker is paired with your device.
- Start playing music or audio on your connected device.
- Use the Volume Up/Down buttons on the speaker or your device to adjust the volume.
- Press the Play/Pause button to pause or resume playback.
- Press and hold the Volume Up button to skip to the next track.
- Press and hold the Volume Down button to go to the previous track.
Hands-Free Calling
The AquaJam AJ2 has a built-in microphone for hands-free calling.
- Answering a Call: When a call comes in, press the Play/Pause/Call button once to answer.
- Ending a Call: During a call, press the Play/Pause/Call button once to end the call.
- Rejecting a Call: Press and hold the Play/Pause/Call button for 2 seconds to reject an incoming call.
Waterproof and Floating Use
The AquaJam AJ2 is IPX7 certified, meaning it can be submerged in water up to 1 meter for 30 minutes. It is also designed to float with the speaker grill facing upwards.
Image: The yellow AquaJam AJ2 speaker floating horizontally on the surface of water, with a stream of water splashing onto its top surface, demonstrating its waterproof capability.
Important: Always ensure the charging port's rubber cap is securely sealed before exposing the speaker to water or snow.
Mounting Options
The AquaJam AJ2 comes with several mounting accessories for versatile placement:
- Bike Handlebar Mount: Attach the speaker to bicycle handlebars for on-the-go audio.
- 3M Multi-Purpose Mount: Use the adhesive mount to secure the speaker to flat surfaces like shower walls, boats, or surfboards. Ensure the surface is clean and dry before applying.
- Carabiner Clip: Attach the speaker to bags, loops, or other gear for easy portability.
Maintenance
- Cleaning: Wipe the speaker with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Waterproof Seal: Regularly inspect the rubber cap covering the charging port for any signs of wear or damage. A compromised seal can affect the speaker's waterproof capabilities.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in constant use.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect the speaker to a power source using the USB cable. |
| Cannot pair with Bluetooth device. | Make sure the speaker is in pairing mode (flashing LED). Ensure Bluetooth is enabled on your device. Move the speaker closer to your device. Try unpairing and re-pairing. |
| No sound or low volume. | Check the volume levels on both the speaker and your connected device. Ensure the speaker is properly paired. |
| Sound distortion. | Reduce the volume on your device or the speaker. Move the speaker closer to your device to improve Bluetooth signal. |
| Charging not working. | Verify the USB cable is securely connected. Try a different USB port or power adapter. Ensure the charging port is clean and free of debris. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | PC10188 |
| Waterproof Rating | IPX7 (Submersible up to 1 meter for 30 minutes) |
| Connectivity | Bluetooth Wireless Technology |
| Compatible Devices | Smartphones, Tablets, Laptops, most Bluetooth devices |
| Power Source | Built-in Lithium Rechargeable Battery |
| Playtime | Up to 10 hours (continuous play) |
| Speaker Output Power | 10 Watts |
| Audio Output Mode | Surround |
| Surround Sound Channel | 2.0 |
| Control Method | Touch Buttons |
| Built-in Microphone | Yes, for hands-free function and speakerphone |
| Dimensions (L x W x H) | 21 x 7 x 6.5 cm (approximately) |
| Weight | 0.47 Kilograms (471 g) |
| Color | Yellow |
Safety Information
- Do not attempt to disassemble or modify the speaker. This may void the warranty and compromise its waterproof integrity.
- Keep the speaker away from extreme heat sources, open flames, or direct sunlight for prolonged periods.
- Ensure the charging port cap is always securely closed when not charging, especially when near water.
- Do not expose the speaker to corrosive liquids.
- Dispose of the battery and speaker according to local regulations. Do not dispose of in household waste.
Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Escape customer service through their official website. Please have your model number (PC10188) and proof of purchase ready when contacting support.