Fujitsu SP-1130 Document Scanner User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your Fujitsu SP-1130 Document Scanner. Please read this manual thoroughly before operating the device and retain it for future reference. The Fujitsu SP-1130 is designed for high-speed document scanning, featuring an Automatic Document Feeder (ADF) and duplex scanning capabilities.

Image: Front view of the Fujitsu SP-1130 Document Scanner, showing the paper input tray and output tray.

2. Setup

2.1 Unpacking

Carefully remove the scanner and all accessories from the packaging. Verify that all components are present:

• Fujitsu SP-1130 Scanner unit
• AC adapter and power cable
• USB cable
• Setup DVD/CD or link to software download
• Quick Start Guide

2.2 Connecting Power

1. Connect the AC adapter to the power input port on the rear of the scanner.
2. Plug the power cable into the AC adapter, then into a standard electrical outlet.

2.3 Connecting to Computer

1. Connect one end of the supplied USB cable to the USB port on the scanner.
2. Connect the other end of the USB cable to an available USB port on your computer.

2.4 Software Installation

Before using the scanner, install the necessary drivers and scanning software. Refer to the Quick Start Guide or the manufacturer's website for the latest software downloads and installation instructions compatible with your operating system (e.g., Windows 7 or later).

3. Operating the Scanner

3.1 Loading Documents

The SP-1130 features an Automatic Document Feeder (ADF) for efficient scanning of multiple pages.

1. Open the input tray cover.
2. Adjust the paper guides to match the width of your documents.
3. Place the documents face-down, top edge first, into the input tray. Ensure the stack is neatly aligned. The ADF supports various paper sizes and weights.

Image: Top view of the Fujitsu SP-1130 Document Scanner, showing the adjustable paper guides in the input tray.

3.2 Starting a Scan

Use the installed scanning software (e.g., PaperStream Capture, ScanSnap Manager, or other TWAIN/ISIS compatible applications) to initiate scanning.

1. Turn on the scanner by pressing the power button.
2. Launch your preferred scanning application on your computer.
3. Select the Fujitsu SP-1130 as your scanner.
4. Configure scan settings such as resolution (up to 600 dpi), color mode (color, grayscale, monochrome), and duplex (two-sided) scanning.
5. Click the 'Scan' button in the software or press the 'Scan' button on the scanner to begin.

Image: The Fujitsu SP-1130 Document Scanner with a document being fed through the Automatic Document Feeder during a scan operation.

3.3 Saving Scanned Documents

After scanning, the software will typically present options to save your documents. Common formats include PDF, JPEG, and TIFF. You can choose the destination folder and filename for your scanned files.

4. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your scanner.

4.1 Cleaning the Scanner

It is recommended to clean the scanner regularly, especially the rollers and glass surfaces, to prevent paper jams and maintain scan quality.

• Power Off: Always turn off and unplug the scanner before cleaning.
• Exterior: Wipe the exterior with a soft, dry, lint-free cloth.
• Glass Surfaces: Gently clean the glass scanning surfaces with a soft cloth lightly dampened with a non-abrasive, alcohol-free glass cleaner.
• Rollers: Refer to the detailed cleaning instructions in the full user manual for specific guidance on cleaning the feed rollers to ensure proper paper feeding.

4.2 Consumables

Over time, certain parts like the feed rollers may wear out and require replacement. Consult the full user manual or Fujitsu's support website for information on replacement parts and procedures.

5. Troubleshooting

This section addresses common issues you might encounter with your Fujitsu SP-1130 scanner.

5.1 Paper Jams

• Cause: Misaligned documents, overloaded tray, worn rollers, or foreign objects.
• Solution: Power off the scanner. Carefully open the covers and remove any jammed paper. Ensure documents are properly aligned and within the specified capacity before reloading. Clean the rollers if necessary.

5.2 Poor Image Quality

• Cause: Dirty glass, incorrect scan settings, or damaged documents.
• Solution: Clean the scanner's glass surfaces. Adjust scan settings (resolution, brightness, contrast) in the software. Ensure original documents are clean and undamaged.

5.3 Scanner Not Detected

• Cause: Loose cable connection, driver issue, or scanner not powered on.
• Solution: Verify the USB cable is securely connected to both the scanner and the computer. Ensure the scanner is powered on. Reinstall scanner drivers if the issue persists. Try a different USB port or cable.

6. Specifications

7. Warranty and Support

For detailed warranty information, please refer to the warranty card included with your product or visit the official Fujitsu website. If you encounter issues that cannot be resolved using this manual's troubleshooting section, please contact Fujitsu technical support for assistance. Have your model number (PA03708-B021) and serial number ready when contacting support.

Online Resources:

• Fujitsu Global Support
• Fujitsu Scanners Product Information