Product Overview
The Blum Tip-on for Doors 956A1004 is a mechanical opening support system designed for handle-less cabinet doors. It allows for easy opening with a light touch, providing enhanced convenience for various cabinet applications. This long version includes a magnet for secure closing.
Product Components
The Blum Tip-on set typically includes the following:
- 1x Tip-ON unit (Long Version with Magnet, Grey)
- 1x Adhesive plate
- 1x Adhesive plate for screwing
Image: Assortment of Blum Tip-on units, showcasing the different types and colors available. The long grey version with magnet is among them.
Setup and Installation
This section provides detailed instructions for installing your Blum Tip-on unit. Ensure you have the necessary tools before beginning.
1. Preparing the Cabinet Panel
For optimal performance, the Tip-on unit requires a 10mm diameter hole bored at least 76mm deep into the cabinet panel. This is applicable for both overlay and inset applications.
Image: Technical diagram illustrating the required drilling dimensions for the Tip-on unit. A 10mm diameter hole with a minimum depth of 76mm is specified for both overlay and inset door types.
2. Determining Tip-on Placement
It is recommended to position the Tip-on unit where a traditional door handle would typically be located for ergonomic access.
Image: Visual guide for Tip-on unit placement, indicating the ideal location on the cabinet door for user interaction.
3. Installing the Catch Plate
The catch plate secures the door when closed. Two types are provided: screw-on and self-adhesive.
Screw-on Catch Plate:
- Align the head of a screw onto the magnetic tip of the Tip-on unit.
- Carefully close the cabinet door to create a small indentation on the inside of the door where the screw tip touches.
- Pre-drill a 2.5mm pilot hole at the marked indentation.
- Install the screw-on catch plate using the pilot hole.
Self-adhesive Catch Plate:
- Remove the backing from the adhesive side of the plate.
- Place the plate onto the magnetic tip of the Tip-on unit with the sticky side facing the cabinet door.
- Close the door to adhere the catch plate to the inside of the door.
- Apply firm pressure to ensure strong adhesion.
4. Adjusting the Tip-on Unit
The Tip-on unit allows for adjustment of the cabinet door gap. Turn the unit left or right to achieve the desired gap.
Image: Illustration of the Tip-on unit's adjustment range, showing how rotation can modify the door gap from -1mm to +4mm.
Installation Video Guide
Video: Official Blum installation guide for Tip-on units, demonstrating the boring method and catch plate installation for various door types. This video provides a visual walkthrough of the steps described above.
Operation
To open a cabinet door equipped with the Blum Tip-on system, simply press gently on the door front. The Tip-on unit will release the door, allowing it to spring open slightly for easy access. To close, push the door gently until the magnet engages and holds it securely.
Image: A cabinet door in an open position, revealing the installed Tip-on unit and illustrating how the door springs open after a gentle push.
Image: Close-up of the Tip-on unit installed within a cabinet, demonstrating its discreet placement and how it interacts with the door when closed.
Image: The Tip-on unit mounted on a cabinet side panel, showcasing its versatility for different cabinet configurations, including tall units.
Maintenance
The Blum Tip-on unit is designed for durability and requires minimal maintenance. Keep the unit free from dust and debris to ensure smooth operation. Avoid using harsh chemicals for cleaning, as this may damage the material. A soft, damp cloth is sufficient for cleaning the visible parts.
Troubleshooting
Door Not Opening or Closing Properly:
- Check Adjustment: Ensure the Tip-on unit is correctly adjusted. Turn the unit left or right to modify the door gap.
- Verify Catch Plate Alignment: Confirm that the catch plate on the door aligns correctly with the Tip-on unit. Re-adjust if necessary.
- Inspect for Obstructions: Ensure there are no objects obstructing the door's movement or the Tip-on mechanism.
Weak Magnetic Hold:
- Clean Magnet and Plate: Dust or debris on the magnet or catch plate can reduce holding strength. Clean both surfaces.
- Check for Damage: Inspect the magnet and catch plate for any signs of damage or wear.
Specifications
| Feature | Detail |
|---|---|
| Brand | Blum |
| Model Number | 956A1004 |
| Material | Nylon |
| Color | Gray |
| Style | With magnet |
| Size | Langversion (Long Version) |
| Door Height Compatibility | Up to 1300 mm |
| Drill Diameter | 10 mm |
| Mounting Type | Door Mount |
| Integrated Features | Door gap adjustment |
Warranty and Support
For warranty information and technical support, please refer to the official Blum website or contact your authorized Blum dealer. Keep your purchase receipt for any warranty claims.
