1. Introduction
The Innovo Medical FR201 is a non-contact infrared thermometer designed for accurate and reliable temperature measurement of the human body. It offers a safe and hygienic method for temperature screening, suitable for infants, children, adults, and the elderly. This device is CE and FDA cleared, ensuring its quality and safety standards.
Key features include:
- Non-contact measurement for hygiene.
- One-second reading for quick results.
- Switchable between Fahrenheit (°F) and Celsius (°C).
- Silent and audible mode options.
- Memory recall for up to 20 previous readings.
2. Safety Information and Precautions
Please read this manual thoroughly before using the thermometer. Improper use may lead to inaccurate readings or device damage.
- Do not immerse the thermometer in water or other liquids.
- Keep the device away from direct sunlight, dust, and extreme temperatures.
- Avoid dropping the thermometer or subjecting it to strong impacts.
- Do not attempt to disassemble or repair the device yourself.
- Use only the specified battery type (2 AAA batteries).
- Keep batteries out of reach of children.
- Consult a medical professional if you have concerns about temperature readings.
- This thermometer is intended for household use and should not replace professional medical advice.
3. Product Overview
Familiarize yourself with the components of your Innovo FR201 thermometer.
Image 1: Front view of the Innovo FR201 thermometer, highlighting the display, measurement button, and mode selection buttons.
The thermometer features a clear LCD display, a measurement button, and buttons for switching between Fahrenheit/Celsius and silent/audible modes. The infrared sensor is located at the front of the device.
4. Setup
4.1 Battery Installation
The Innovo FR201 thermometer requires 2 AAA batteries (included).
- Locate the battery compartment cover on the back of the thermometer.
- Slide the cover open.
- Insert two AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover until it clicks into place.
The thermometer is now ready for use.
5. Operating Instructions
5.1 Taking a Forehead Temperature Measurement
- Ensure the thermometer is in forehead measurement mode. If not, press the mode button to switch.
- Hold the thermometer approximately 1-2 inches (2-5 cm) from the center of the forehead.
- Press and release the measurement button.
- The temperature reading will be displayed on the LCD screen within one second.
- A beep will sound (if not in silent mode) to indicate the measurement is complete.
Note: For best accuracy, ensure the forehead is clean and dry, free from hair or sweat. Wait at least 30 seconds between measurements if taking multiple readings on the same person.
5.2 Switching Between Fahrenheit and Celsius
With the thermometer turned on, press the °C/°F button to toggle between Fahrenheit and Celsius display modes.
5.3 Silent and Audible Mode
To switch between silent and audible modes, press the speaker icon button. The display will indicate if silent mode is active.
5.4 Memory Recall
The thermometer can store up to 20 previous temperature readings.
- With the thermometer turned on, press the "MEM" button (or similar memory icon, refer to device for exact icon).
- Each press of the "MEM" button will cycle through the stored readings, from most recent to oldest.
6. Maintenance
6.1 Cleaning the Thermometer
Regular cleaning ensures accurate readings and extends the life of your device.
- Wipe the thermometer body with a soft, dry cloth.
- For the infrared sensor, gently wipe with a cotton swab lightly moistened with alcohol. Allow to dry completely before use.
- Do not use abrasive cleaners or immerse the device in water.
6.2 Storage
When not in use, store the thermometer in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
Image 2: Innovo FR201 thermometer with its user manual and protective carrying case, illustrating proper storage.
If the thermometer will not be used for an extended period, remove the batteries to prevent leakage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| "Lo" or "Hi" displayed | Temperature is outside the measurement range (e.g., below 89.6°F / 32°C or above 109.2°F / 42.9°C). | Ensure the thermometer is used within the specified ambient temperature range. Re-measure correctly. |
| Inaccurate readings | Dirty sensor, incorrect measurement distance, environmental factors (drafts, direct sunlight), recent activity (eating, exercising). | Clean the sensor. Ensure correct distance and stable environment. Wait 15-30 minutes after activity before measuring. |
| No display / Device won't turn on | Dead or incorrectly inserted batteries. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| "Err" message | System error or malfunction. | Remove batteries, wait 1 minute, then reinsert. If error persists, contact customer support. |
8. Specifications
| Model: | FR201 (10499DC2-O) |
| Measurement Range: | Body: 89.6°F - 109.2°F (32.0°C - 42.9°C) |
| Measurement Accuracy: | ±0.4°F (±0.2°C) |
| Display Resolution: | 0.1°F / 0.1°C |
| Measurement Distance: | 1-2 inches (2-5 cm) |
| Memory: | 20 readings |
| Power Source: | 2 x AAA batteries (included) |
| Automatic Shut-off: | Approximately 30 seconds after last measurement |
| Product Dimensions: | 6.8 x 5 x 2.6 inches |
| Item Weight: | 0.5 Pounds (8 ounces) |
| Specification Met: | CE, FDA |
9. Warranty and Support
Innovo Medical products are designed for reliability and durability. For specific warranty details, please refer to the warranty card included with your product or visit the official Innovo Medical website.
If you encounter any issues or have questions regarding your Innovo FR201 thermometer, please contact Innovo Medical customer support. Contact information can typically be found on the product packaging or the official Innovo Medical website.
Note: The provided product data does not contain explicit warranty duration or direct support contact details. Please refer to the manufacturer's official resources for the most current information.