Introduction
Thank you for choosing the Utilitech 15-Amp 2-Outlet Mechanical Residential Plug-in Countdown Lighting Timer. This device is designed to provide convenient and automated control over your outdoor lighting and other electrical appliances, helping you save energy and enhance security. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your timer.
The image displays the Utilitech 15-Amp 2-Outlet Mechanical Residential Plug-in Countdown Lighting Timer. It is a black, weather-resistant unit with a short power cord ending in a three-prong plug. The front features a large rotary dial for setting timer functions and two grounded receptacles at the bottom. A small, black remote control with two buttons and a key ring is shown next to the main unit.
Important Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:
- This timer is designed for outdoor use but is not submersible. Do not immerse in water or expose to direct water spray from hoses or pressure washers.
- Always plug the timer into a grounded 3-prong outlet. Do not remove the grounding prong.
- Do not exceed the electrical ratings of the timer (15 Amps, 125 Volts, 1875 Watts). Overloading can cause overheating and fire.
- Keep children away from the timer and connected devices.
- Ensure all connections are secure before operating.
- Unplug the timer from the power source before cleaning or performing any maintenance.
- Do not use if the cord or plug is damaged.
Product Features
- Outdoor mechanical timer with remote control and two grounded receptacles.
- Multiple timer settings: OFF, ON, DUSK TO DAWN, 2 hours, 4 hours, 6 hours, and 8 hours.
- Integrated sensor automatically turns lights on at dusk and off at dawn when set to 'DUSK TO DAWN' mode.
- Weather-resistant casing with downward-facing grounded receptacles to help prevent water entry.
Setup Instructions
- Unpack the Timer: Carefully remove the timer and remote control from its packaging. Inspect for any visible damage.
- Choose a Location: Select a suitable outdoor location that is protected from direct heavy rain and allows the light sensor to detect ambient light accurately. Avoid placing it under eaves or in shaded areas if using the 'DUSK TO DAWN' feature.
- Plug in the Timer: Insert the timer's three-prong plug into a grounded 125V outdoor electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for added safety.
- Connect Your Devices: Plug your outdoor lights or other electrical appliances into the two grounded receptacles on the bottom of the timer. Ensure the total wattage of connected devices does not exceed 1875 Watts.
Operating Instructions
The Utilitech timer features a rotary dial for setting the desired operation mode and a remote control for convenient manual override.
Using the Rotary Dial:
Rotate the dial on the front of the timer to select one of the following modes:
- OFF: The connected devices will remain off.
- ON: The connected devices will remain continuously on.
- DUSK TO DAWN: The timer will automatically turn on connected devices when it gets dark and turn them off when it gets light.
- 2H (2 Hours): The timer will turn on at dusk and remain on for 2 hours, then turn off.
- 4H (4 Hours): The timer will turn on at dusk and remain on for 4 hours, then turn off.
- 6H (6 Hours): The timer will turn on at dusk and remain on for 6 hours, then turn off.
- 8H (8 Hours): The timer will turn on at dusk and remain on for 8 hours, then turn off.
Using the Remote Control:
The remote control allows for manual override of the timer settings. Point the remote directly at the timer for best results.
- ON Button: Press to manually turn on the connected devices. This will override any current timer setting and keep the devices on.
- OFF Button: Press to manually turn off the connected devices. This will override any current timer setting and keep the devices off.
- To resume the timer's programmed function, you may need to cycle the rotary dial to a different setting and then back to your desired timed mode.
Maintenance
- Cleaning: To clean the timer, unplug it from the power source. Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: When not in use for extended periods, store the timer in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the power cord and plug for any signs of damage, such as cuts, fraying, or bent prongs. If damage is found, discontinue use and replace the unit.
Troubleshooting
If you encounter issues with your Utilitech timer, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer not turning on/off. | No power to the outlet; Timer dial set to OFF; Connected device is faulty; Overload. | Check the power outlet and circuit breaker. Ensure the timer dial is set to a timed or ON position. Test the connected device directly in an outlet. Reduce the total load to below 1875 Watts. |
| Dusk-to-dawn feature not working correctly. | Light sensor is obstructed or in a shaded area; Ambient light is too high. | Relocate the timer to an area where the light sensor has unobstructed access to ambient light. Ensure no artificial light sources (e.g., porch lights) are directly illuminating the sensor. |
| Remote control not responding. | Out of range; Obstruction between remote and timer; Remote battery low/dead (if applicable). | Ensure you are within the remote's operating range and have a clear line of sight to the timer. Replace the remote battery if necessary (refer to remote instructions for battery type). |
| Timer stopped working after exposure to rain. | Excessive water exposure. | While weather-resistant, the timer is not waterproof. Ensure it is installed in a location protected from direct, heavy rain or standing water. If water has entered the unit, discontinue use immediately. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | CECOMINOD045829 |
| Electrical Rating | 15 Amps, 125 Volts, 1875 Watts |
| Number of Outlets | 2 Grounded Receptacles |
| Timer Type | Mechanical with Photo Sensor |
| Item Weight | 8.8 ounces |
| Package Dimensions | 9 x 6 x 2 inches |
| Manufacturer | Utilitech |
| Date First Available | June 10, 2015 |
Warranty and Support
For warranty information or technical support regarding your Utilitech 15-Amp 2-Outlet Mechanical Residential Plug-in Countdown Lighting Timer, please refer to the product packaging or any documentation included with your purchase. You may also visit the official Utilitech website for customer service contact details and additional resources. Please have your model number (CECOMINOD045829) and purchase information ready when contacting support.