OSRAM LEDINT202

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

OSRAM LEDambient Tuning Lights Extension Kit (LEDINT202) Instruction Manual

Model: LEDINT202

Introduction

This manual provides instructions for the installation, operation, and maintenance of the OSRAM LEDambient Tuning Lights Extension Kit (Model LEDINT202). This kit is designed to expand the existing OSRAM LEDambient Tuning Lights Basic Kit, offering enhanced customization for vehicle interior lighting.

Product Overview

The OSRAM LEDambient Tuning Lights Extension Kit provides additional self-adhesive LED strips and a distributor to expand your vehicle's interior lighting system. It integrates with the basic kit to offer a wider range of lighting possibilities.

What's in the Box

  • Two LED strips, each 30.5 cm in length.
  • Three wires, each 12.7 cm in length.
  • One distributor for connecting up to three strips.
  • Alcohol prep pads for surface cleaning.
  • Additional adhesive strips.

Product Components

OSRAM LEDambient Tuning Lights Extension Kit packaging showing product features and branding.
The product packaging for the OSRAM LEDambient Tuning Lights Extension Kit, highlighting its features and the OSRAM brand.
Contents of the OSRAM LEDambient Tuning Lights Extension Kit, including LED strips, wires, distributor, alcohol pads, and adhesive strips.
A detailed view of all components included in the extension kit: two LED strips, connecting wires, a central distributor, surface preparation pads, and extra adhesive.
A single OSRAM LEDambient Tuning Light strip, coiled, showcasing its flexible design and individual LED lights.
A flexible LED strip from the kit, demonstrating its design and the individual light-emitting diodes.

Setup and Installation

This extension kit requires the OSRAM LEDambient Tuning Lights Basic Kit for operation. Ensure the basic kit is already installed and functioning before proceeding.

  1. Preparation: Identify desired locations for the additional LED strips within your vehicle's interior. Ensure surfaces are clean and dry. Use the provided alcohol prep pads to thoroughly clean the installation areas.
  2. Adhesion: Peel the backing from the self-adhesive strips on the LED lights and firmly press them onto the prepared surfaces.
  3. Connection: Connect the new LED strips to the distributor. The distributor allows for connecting up to three strips. Connect the distributor to the existing basic kit's control unit.
  4. Cable Management: Route all cables neatly and securely to avoid interference with vehicle operation or passenger movement.
Vehicle interior with OSRAM LEDambient Tuning Lights installed, illuminating the footwell in blue.
An example of the LEDambient Tuning Lights installed in a car's footwell, emitting a blue light.
Vehicle interior with OSRAM LEDambient Tuning Lights installed, illuminating the footwell in a lighter blue or cyan color.
Another view of the LEDambient Tuning Lights installed in a car's footwell, showing a different color output, possibly cyan.

Operating Instructions

The LEDambient Tuning Lights are controlled via the remote control included with the basic kit.

Functions

  • Color Selection: Choose from 16 distinct color variants to match your preference or vehicle interior.
  • Brightness Adjustment: Adjust the brightness across 16 settings to achieve the desired ambient light level.
  • Lighting Modes: Select from 5 different modes:
    • Flash: Rapid flashing of selected color.
    • Strobe: Quick, intermittent flashes.
    • Fade: Gradual transition between colors.
    • Smooth: Smooth, continuous color changes.
    • Solid: Constant illumination in a single selected color.

Maintenance

The OSRAM LEDambient Tuning Lights Extension Kit requires minimal maintenance.

  • Cleaning: Gently wipe the LED strips with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents.
  • Adhesive Check: Periodically check the adhesive strips to ensure the LED lights remain securely attached. Reapply new adhesive if necessary.

Troubleshooting

ProblemPossible CauseSolution
LED strip not lighting upLoose connectionEnsure all connections to the distributor and basic kit are secure.
LED strip not lighting upFaulty stripIf connections are secure and other strips work, the individual strip may be faulty. Contact customer support.
Remote control not respondingBattery low/deadReplace the remote control battery.
Remote control not respondingObstructionEnsure a clear line of sight between the remote and the basic kit's receiver.

Specifications

FeatureDetail
BrandOSRAM
ModelLEDINT202
Item Dimensions (L x W x H)3.5 x 6.89 x 2.52 inches
Item Weight0.08 Kilograms (2.85 ounces)
Voltage12 Volts
Light Source TypeLED
Form FactorStrip
ColorBlack
MaterialPlastic, rubber
Water Resistance LevelWater Resistant
Special FeaturesIndividually adjustable color lighting, Wireless control
Included Components1 (unit, referring to the kit)

Warranty and Support

OSRAM offers a two-year guarantee on the LEDambient Tuning Lights Extension Kit. For warranty claims or technical support, please refer to the contact information provided with your basic kit or visit the official OSRAM website.

Product Video

This video demonstrates the dynamic lighting capabilities of OSRAM LEDambient products, showing how they enhance vehicle interiors with various colors and modes.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.