1. Introduction
This manual provides instructions for the safe installation, operation, and maintenance of your GE Lighting 23006 LED A21 bulb. Please read these instructions carefully before use and retain them for future reference.
The GE Lighting 23006 is an Extra Soft White LED bulb designed to replace traditional 100-watt incandescent bulbs while consuming only 17 watts of power. It provides 1520 lumens of light and features a standard E26 medium base. This bulb is dimmable, offering adjustable light levels for various environments.
2. Safety Information
- WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- This bulb is intended for indoor use only. Do not expose to water or excessive moisture.
- Do not use with dimmers not specifically designed for LED bulbs, as this may cause flickering or damage. Refer to gelighting.com/dimming for dimmer compatibility information.
- Do not disassemble the bulb. There are no user-serviceable parts inside.
- Ensure the fixture is rated for the bulb's wattage and size.
- Avoid touching the bulb with bare hands immediately after use, as it may be warm.
3. Setup and Installation
- Turn off power: Before replacing an existing bulb or installing a new one, ensure the power to the light fixture is turned off at the switch and the circuit breaker.
- Remove old bulb (if applicable): Carefully unscrew the old bulb from the socket.
- Install new bulb: Screw the GE Lighting 23006 LED A21 bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Restore power: Turn the power back on at the circuit breaker and then at the light switch.
Figure 1: GE Lighting 23006 LED A21 bulb packaging. This image illustrates the bulb's key features including its 17W power consumption (100W replacement), 1520 lumens brightness, and dimmable functionality, along with estimated energy savings and lifespan.
4. Operating Instructions
Once installed, the GE Lighting 23006 LED bulb operates like a standard light bulb. Simply use the wall switch to turn the light on or off.
Dimming Functionality
This LED bulb is dimmable. To adjust the brightness, use a compatible LED dimmer switch. Dimming performance may vary depending on the dimmer model and electrical installation. For optimal performance and to avoid issues like flickering or buzzing, ensure your dimmer is compatible with LED technology.
For a list of compatible dimmers and further information on dimming performance, please visit the official GE Lighting dimming guide at gelighting.com/dimming.
5. Maintenance
LED bulbs require minimal maintenance. No regular cleaning or replacement of internal components is necessary.
- Cleaning: If the bulb requires cleaning, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: The bulb has a long operating life of approximately 25,000 hours. Replace the bulb when it reaches the end of its operational life or if it becomes damaged.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose connection, or faulty bulb. | Check power switch and circuit breaker. Ensure bulb is screwed in tightly. Test bulb in another working fixture. |
| Bulb flickers or buzzes. | Incompatible dimmer switch, loose connection, or electrical interference. | Ensure dimmer is LED compatible. Tighten bulb. Consult an electrician if problem persists. |
| Light output is too low or too high. | Dimmer setting or incorrect bulb for application. | Adjust dimmer. Verify bulb specifications meet your lighting needs. |
If troubleshooting steps do not resolve the issue, contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 23006 |
| Light Source Type | LED |
| Bulb Shape Size | A21 |
| Wattage | 17 Watts |
| Incandescent Equivalent | 100 Watts |
| Brightness | 1520 Lumens |
| Light Color | Extra Soft White |
| Bulb Base | E26 Medium |
| Voltage | 120 Volts |
| Dimmable | Yes |
| Color Rendering Index (CRI) | 80 |
| Rated Life | 25,000 Hours |
| Indoor/Outdoor Use | Indoor Only |
8. Warranty and Support
GE Lighting products are designed for quality and reliability. For specific warranty information regarding your GE Lighting 23006 LED A21 bulb, please refer to the documentation included with your purchase or visit the official GE Lighting website.
For technical support, troubleshooting assistance, or to inquire about warranty claims, please contact GE Lighting customer service through their official website or the contact information provided on the product packaging.
