Globo 60208W Modern Aged Brass Wall Light Instruction Manual

Introduction

Thank you for choosing the Globo 60208W Modern Aged Brass Wall Light. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before beginning installation and retain them for future reference.

Important Safety Information

• Always disconnect the power supply at the main fuse box or circuit breaker before installation, maintenance, or bulb replacement.
• Installation must be performed by a qualified electrician in accordance with all local and national wiring regulations.
• This fixture is designed for indoor use only. Do not expose to moisture or direct water.
• Ensure the mounting surface can support the weight of the fixture.
• Use only the specified bulb type and wattage (E27, max 60W incandescent or equivalent LED).
• Do not touch the bulb immediately after use, as it may be hot.
• Keep packaging materials out of reach of children.

Package Contents

Please check that all components are present and undamaged before proceeding with installation.

• 1 x Globo 60208W Wall Light Fixture (Aged Brass finish with Satin Glass shade)
• Mounting hardware (screws, wall plugs)
• Instruction Manual

Note: An E27 bulb is required but not included in the package.

Setup and Installation

1. Prepare for Installation:

   Before starting, ensure the power supply to the installation area is switched off at the main circuit breaker. Use a voltage tester to confirm the power is off.

2. Mark Mounting Points:

   Hold the mounting bracket against the wall at the desired installation location. Use a pencil to mark the positions for drilling holes.

3. Drill Holes:

   Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert wall plugs if necessary.

4. Attach Mounting Bracket:

   Secure the mounting bracket to the wall using the provided screws.

5. Wire the Fixture:

   Connect the household electrical wires to the fixture's wires according to standard wiring codes (e.g., live to live, neutral to neutral, ground to ground). Ensure all connections are secure and insulated.

6. Mount the Fixture:

   Carefully align the fixture with the mounting bracket and secure it in place using the provided screws or fasteners.

   

   Image: The Globo 60208W wall light mounted on a wall, demonstrating its aesthetic integration into a room setting.

7. Install the Bulb:

   Screw an E27 bulb (not included) into the lamp holder. Do not overtighten.

8. Restore Power:

   Once installation is complete, restore power at the main circuit breaker and test the light fixture.

Operating Instructions

The Globo 60208W wall light operates via your home's standard wall switch. There is no integrated switch on the fixture itself.

• Turning On/Off: Use the wall switch connected to the fixture to turn the light on or off.
• Bulb Replacement:
  1. Ensure the power is off at the circuit breaker.
  2. Allow the old bulb to cool completely before touching.
  3. Carefully unscrew the old E27 bulb.
  4. Screw in a new E27 bulb (max 60W incandescent or equivalent LED).
  5. Restore power and test.

Image: The wall light providing illumination in a room, highlighting its operational function.

Care and Maintenance

Regular cleaning will help maintain the appearance and performance of your wall light.

• Cleaning:

  Before cleaning, ensure the power supply is disconnected. Wipe the fixture with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish or glass.

• Glass Shade Care:

  The satin glass shade can be gently wiped with a soft, damp cloth. Ensure it is completely dry before restoring power.

• Inspection:

  Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.

Troubleshooting

If you experience issues not listed here or if the problem persists after attempting the solutions, please contact a qualified electrician or the manufacturer's support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

Manufacturer: Globo