Franke FDW 612 E 6PA+ Fully Integrated Dishwasher User Manual

Introduction

This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your Franke FDW 612 E 6PA+ Fully Integrated Dishwasher. Please read this manual thoroughly before using the appliance to ensure optimal performance and to prevent damage or injury. Keep this manual for future reference.

The Franke FDW 612 E 6PA+ is designed for maximum efficiency and convenience, featuring an A+ energy rating, 6 wash programs, 5 temperature settings, and a 12 place setting capacity. Its fully integrated design ensures seamless integration into your kitchen cabinetry.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

• Ensure the appliance is properly grounded.
• Do not operate the dishwasher if it is damaged.
• Keep children away from the dishwasher, especially when it is operating.
• Use only detergents and rinse aids specifically designed for automatic dishwashers.
• Sharp items should be loaded with points down to prevent injury.
• The Aqua Stop feature provides protection against water leaks by cutting off the water supply in case of a detected leak or overflow.

Setup and Installation

The Franke FDW 612 E 6PA+ is a fully integrated dishwasher designed to be built into your kitchen cabinetry. Professional installation is recommended to ensure proper fit and function.

Unpacking

• Carefully remove all packaging materials.
• Inspect the dishwasher for any shipping damage. Report any damage immediately to your retailer.
• Ensure all accessories are present.

Water and Electrical Connections

• Connect the water inlet hose to a cold water supply with a minimum pressure of 0.04 MPa and a maximum of 1 MPa.
• Ensure the drain hose is properly connected to a suitable drain.
• Connect the appliance to a grounded electrical outlet according to local regulations.

Initial Use

• Before the first wash, fill the salt dispenser with dishwasher salt (refer to the "Maintenance" section).
• Fill the rinse aid dispenser (refer to the "Maintenance" section).
• Run a short wash cycle without dishes to clean the interior.

Operating Instructions

Control Panel

The dishwasher features a fully integrated control panel. LED indicators on the door's top edge provide information regarding salt and rinse aid levels, ensuring you are always aware of when to refill.

Loading the Dishwasher

Proper loading ensures optimal cleaning results and efficient use of space. The dishwasher has a capacity for 12 place settings.

This image shows the interior of the Franke FDW 612 E 6PA+ dishwasher with the door open, revealing the upper and lower baskets filled with plates, glasses, and cutlery. The adjustable upper basket and cutlery basket are visible, demonstrating the appliance's capacity and loading flexibility.

• Adjustable Upper Basket: The upper basket can be adjusted to accommodate larger items in the lower basket, such as pots and pans.
• Lower Basket: Ideal for plates, serving dishes, and larger items.
• Cutlery Basket: Place forks, spoons, and knives in the designated cutlery basket, ensuring sharp ends face downwards.
• Avoid overcrowding to allow water and detergent to reach all surfaces.

Selecting a Wash Program

The dishwasher offers 6 programs and 5 temperature levels to suit various soil levels and dish types.

• Program Selection: Choose the appropriate program based on the type and amount of dishes and their soil level.
• Temperature Adjustment: The water temperature can be adjusted across 5 levels, allowing for customized cleaning based on how dirty the dishes are.
• Quick Wash: A 40-minute program is available for lightly soiled dishes, offering a fast cleaning solution.
• Half-Load Function: For smaller loads, the half-load function allows you to wash dishes in only one basket (upper or lower), saving water and energy.

Starting a Wash Cycle

1. Load the dishwasher.
2. Add detergent to the dispenser.
3. Select the desired program.
4. Close the dishwasher door firmly.
5. Press the Start button.

Maintenance and Cleaning

Regular maintenance ensures the longevity and optimal performance of your dishwasher.

Cleaning the Filters

• The filter system prevents larger food particles from reaching the pump.
• Regularly check and clean the coarse, fine, and micro filters to prevent blockages and ensure efficient washing.
• Twist the cylindrical filter counter-clockwise to remove it, then separate the fine and micro filters. Rinse all parts under running water.

Adding Dishwasher Salt

• The salt indicator light on the control panel will illuminate when salt needs refilling.
• Unscrew the cap of the salt dispenser located at the bottom of the wash tub.
• Using a funnel, pour dishwasher salt into the dispenser until it is full.
• Replace the cap firmly.

Adding Rinse Aid

• The rinse aid indicator light will illuminate when rinse aid needs refilling.
• Open the rinse aid dispenser cover, usually located next to the detergent dispenser.
• Pour rinse aid into the dispenser until it reaches the maximum level indicator.
• Close the cover securely.

Cleaning the Spray Arms

• Periodically check the spray arm nozzles for blockages.
• Remove the spray arms and clean any clogged holes with a thin wire or toothpick.

Exterior Cleaning

• Wipe the exterior surfaces with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.

Troubleshooting

Before contacting service, review the following common issues and their solutions.

If the problem persists after attempting these solutions, please contact Franke customer service or a qualified technician.

Specifications

Key technical specifications for the Franke FDW 612 E 6PA+ Dishwasher:

• Brand: Franke
• Model Number: FDW-612 E6P A++ (Manufacturer's Product Model Number: 117.0266.492)
• Form Factor: Fully Integrated (Yerleşik)
• Capacity: 12 Place Settings
• Control Type: Fully Integrated
• Noise Level: 49 Decibels
• Material: Stainless Steel
• Product Dimensions: 59.79 x 81.51 x 57 cm (Width x Height x Depth)
• First Available Date: June 27, 2021

Warranty and Support

Specific warranty details for the Franke FDW 612 E 6PA+ Dishwasher are not provided within this manual. Please refer to your purchase documentation, the official Franke website, or contact your retailer for comprehensive warranty information.

For technical support, spare parts, or service requests, please contact Franke customer service. Ensure you have your appliance's model number and serial number ready when contacting support.

You can typically find contact information on the Franke official website or in the documentation provided with your appliance.