UHPPOTE UT-RL-209

Download PDF
Contents

UHPPOTE UT-RL-209 Wired Two-Way Audio Intercom Doorphone Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your UHPPOTE UT-RL-209 Wired Two-Way Audio Intercom Doorphone. Please read this manual thoroughly before using the product to ensure proper function and longevity.

2. Product Overview

The UHPPOTE UT-RL-209 is a non-visual, one-to-one wired intercom system designed for two-way audio communication. It is suitable for various environments such as offices, warehouses, and residential settings. The system consists of two intercom units that communicate over a wired connection.

Key Features:

  • Two-way audio communication.
  • Wired connection for reliable communication.
  • Maximum operating distance of 200 meters (656 feet) when connected with RVV2 (2 PIN) cable.
  • Flexible power options: 110VAC power adapter or 4x AA 1.5V alkaline batteries per unit (batteries not included).
  • Adjustable ringtone volume.
  • Easy installation and simple operation.
Two white UHPPOTE intercom units, front view, showing handsets and coiled cords.

Figure 1: Front view of the UHPPOTE UT-RL-209 Intercom Doorphone units.

3. Package Contents

Please verify that all items are present in your package:

  • 2 x UHPPOTE UT-RL-209 Intercom Units
  • 2 x AC Power Adapters (US style plug)
  • 1 x 3.3ft Connection Cable (for initial setup or short distances)

4. Setup and Installation

4.1 Wiring Connection

The two intercom units must be wired to each other for communication. Use a twin conductor cable for connection. The effective talking distance is up to 200 meters (656 feet) when using RVV2 (2 PIN) cable, provided the wire resistance is less than 60 ohms. Pay attention to the polarity (color of conductors) when connecting.

Bottom view of two UHPPOTE intercom units, showing connection ports and mounting points.

Figure 2: Bottom view of intercom units showing wiring connection points.

4.2 Power Supply

Each intercom unit requires power. You have two options:

  1. AC Power: Plug the provided 110VAC power adapter into a standard wall outlet and connect it to the power input port on the intercom unit.
  2. Battery Power: Insert four (4) R6P size AA 1.5V alkaline batteries into the battery compartment located on the bottom of each unit. Ensure correct polarity. Batteries are not included.
Bottom view of two UHPPOTE intercom units, with battery compartments open.

Figure 3: Bottom view showing battery compartments for AA batteries.

4.3 Mounting

The intercom units can be mounted on a wall or placed on a flat surface. Use the mounting holes on the bottom of each unit for secure wall installation. Ensure the units are placed in locations where the wired connection can be maintained within the specified distance.

Side view of two UHPPOTE intercom units, showing power cords and coiled handset cords.

Figure 4: Side view of intercom units with power and handset cords connected.

5. Operating Instructions

5.1 Making a Call

To initiate a call to the other unit:

  1. Pick up your handset.
  2. Press and hold the call button (typically located on the side or front of the unit).
  3. The bell on the other handset will ring.
  4. Speak into the microphone on your handset.
  5. Once the conversation is complete, replace your handset to end the call and conserve power.

5.2 Receiving a Call

When the bell rings on your unit:

  1. Pick up the handset.
  2. Begin speaking.
  3. Replace the handset when the conversation is finished.

5.3 Volume Adjustment

The ringtone volume can be adjusted on each unit. Refer to the specific unit for the location of the volume control dial or switch.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the intercom units. Do not use liquid cleaners or abrasive materials.
  • Battery Replacement: If using battery power, replace all four AA batteries in both units simultaneously when performance degrades or the low battery indicator (if present) illuminates.
  • Cable Inspection: Periodically check the connection cable for any signs of wear or damage. Replace damaged cables immediately to ensure proper operation and safety.

7. Troubleshooting

ProblemPossible CauseSolution
No power to unit(s)AC adapter unplugged or faulty; batteries depleted or incorrectly inserted.Check AC adapter connection and power outlet. Replace batteries, ensuring correct polarity.
No sound or poor sound qualityLoose or incorrect wiring; damaged cable; distance exceeds maximum range; handset not picked up.Verify all wiring connections are secure and correct. Inspect cable for damage. Ensure units are within 200m range. Confirm handset is picked up during conversation.
Ringtone not workingVolume too low; wiring issue.Adjust ringtone volume. Check wiring connections.
Intermittent communicationLoose connection; cable damage; interference.Secure all connections. Inspect and replace damaged cables. Ensure cable is not near strong electrical interference sources.

8. Specifications

FeatureSpecification
Model NumberUT-RL-209
TypeNon-Visual One-to-one Wired Intercom
CommunicationTwo-Way Audio
Max Operating Distance200 meters (656 feet) with RVV2 (2 PIN) cable
Power SourceAC 110V or 4 x AA 1.5V batteries per unit
Voltage12 Volts (internal operating voltage)
MaterialPlastic
ColorWhite
Item Weight1.14 pounds (per pair)
Package Dimensions9.49 x 8.5 x 5 inches

9. Warranty and Support

UHPPOTE products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. For technical support or inquiries, please visit the official UHPPOTE website or contact their customer service department.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.