Introduction
The Munchkin Brica Sun Safety Car Window Roller Shade is designed to provide optimal sun protection for vehicle occupants, particularly children. This retractable shade helps block harmful UVA/UVB rays and features a patented White Hot heat alert system to indicate when the car's interior temperature is too high. This manual provides detailed instructions for proper installation, operation, and maintenance of your car window shades.
Image: Two Munchkin Brica Sun Safety Car Window Roller Shades, showing their design and the heat alert indicator.
Product Features
- Optimal Coverage: Each shade measures 15 x 19 inches (35.6 x 43.2 cm), providing substantial sun protection.
- White Hot Indicator: A safety feature that changes color to white when the car's interior temperature is excessively hot, alerting caregivers.
- Versatile Attachment: Offers two installation methods: adjustable clips for window frames or suction cups for direct window adhesion.
- Easy Retraction: A single push button allows for smooth and effortless retraction of the shade when not needed.
- Enhanced Visibility: Constructed with Safe-View premium mesh material, ensuring clear visibility through the window while effectively blocking sunlight.
- UVA/UVB Protection: Designed to help block harmful ultraviolet A and B rays.
Image: Close-up view of the White Hot heat alert indicator, which changes color to signal high temperatures.
Image: The roller shade installed in a car window, demonstrating its ability to block glare while allowing visibility.
Setup and Installation
The Munchkin Brica Sun Safety Car Window Roller Shade offers two primary installation methods to suit various vehicle types and preferences:
Method 1: Using Suction Cups
- Clean the Window: Ensure the car window surface where the suction cups will be placed is clean and dry. This is crucial for optimal suction.
- Position the Shade: Hold the shade against the window in the desired position.
- Attach Suction Cups: Press the suction cups firmly against the glass until they adhere securely.
- Check Adhesion: Gently tug on the shade to confirm it is firmly attached. Reapply if necessary, especially in varying temperatures.
Method 2: Using Adjustable Clips
- Locate Window Frame: Identify a suitable position on the car window frame where the clips can securely attach.
- Attach Clips: Hook the adjustable clips over the top edge of the window frame. Ensure they are snug and stable.
- Adjust Position: Slide the shade left or right along the clips to achieve the desired coverage.
Note: You may use a combination of both methods if preferred, for example, clips at the top and suction cups at the bottom for added stability.
Image: The dual attachment system, illustrating both the adjustable clips and suction cups for installation.
Operating Instructions
Extending the Shade
Gently pull the shade downwards to extend it to the desired length. The shade will lock into place automatically.
Retracting the Shade
To retract the shade, locate the small button on the top housing of the shade. Press this button firmly, and the shade will smoothly roll upwards into its housing.
White Hot Heat Alert System
The White Hot indicator is located at the bottom edge of the shade. This indicator is designed to change color to white when the temperature inside the car becomes too hot. This serves as a visual warning to ensure the safety and comfort of occupants, especially children. Always check the indicator before placing a child in the car.
Maintenance
- Cleaning the Shade: Wipe the mesh fabric with a damp cloth and mild soap if necessary. Allow to air dry completely before retracting.
- Cleaning Suction Cups: If suction cups lose their grip, remove them, wash with warm soapy water, rinse thoroughly, and allow to air dry. Reapply to a clean window surface.
- Storage: When not in use for extended periods, retract the shades fully to protect the mesh fabric.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shade does not stick with suction cups. | Window surface is dirty or oily; suction cups are dirty or warped; extreme temperature fluctuations. | Clean the window thoroughly. Clean suction cups with warm soapy water. If cups are warped, try soaking in warm water to reshape. Reapply firmly. Consider using adjustable clips if suction remains an issue. |
| Shade does not retract smoothly. | Mechanism is obstructed or dirty; retraction spring issue. | Ensure no debris is blocking the retraction path. Gently pull down and release the shade a few times. If the issue persists, contact customer support. |
| White Hot indicator is always white or never changes. | Sensor malfunction or extreme ambient temperature. | Verify the car's actual temperature. If the indicator appears faulty, contact customer support. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Munchkin Brica |
| Model Number | 61222 |
| Product Dimensions (each shade) | 15" W x 19" L (35.6 cm x 43.2 cm) |
| Overall Product Dimensions | 20"L x 18.5"W (approximate, refers to housing) |
| Color | Black |
| Number of Pieces | 2 |
| Item Weight | 13.7 ounces (for the pair) |
| Attachment Type | Adjustable clips or Suction cups |
| Special Feature | White Hot Heat Alert Indicator, UVA/UVB Protection |
| UPC | 014708612229 |
Image: Dimensional diagram of the car window shade, indicating its width and length.
Warranty and Support
Munchkin products are manufactured to high-quality standards. For specific warranty information, product support, or to report any issues, please contact Munchkin customer service directly. Contact details can typically be found on the product packaging or the official Munchkin website.
Please retain your proof of purchase for any warranty claims.
