A-Tech 32GB (2x16GB) DDR3 ECC Registered RAM Installation Guide

1. Introduction

This manual provides essential instructions for the installation and proper use of your A-Tech 32GB (2 x 16GB) DDR3 ECC Registered PC3-10600 1333MHz Quad Rank RAM Memory Kit. This memory kit is specifically designed for SuperMicro SuperServer 5000 Series 5086B-TRF (SYS-5086B-TRF) systems to enhance performance and stability.

Please read this guide thoroughly before proceeding with installation to ensure correct setup and to prevent potential issues.

2. Safety Information and Compatibility

WARNING: This product is specifically designed for SuperMicro SuperServer 5000 Series 5086B-TRF (SYS-5086B-TRF). Using this memory with other systems may result in incompatibility or improper function. Always verify your system's memory requirements before installation.

This memory is NOT COMPATIBLE with standard desktop or laptop PCs/computers. It is intended for server environments that require ECC Registered DIMM memory.

Image: Two A-Tech 16GB DDR3 ECC Registered RAM modules, showing the green PCB and black memory chips with A-Tech branding.

Image: A banner emphasizing that the memory is designed for server systems and is not compatible with desktop or laptop PCs.

3. Product Features

• Memory Type: 32GB KIT (2 x 16GB) DIMM DDR3 ECC Registered PC3-10600 1333MHz Quad Rank RAM Memory.
• Brand: Genuine A-Tech Memory.
• Compatibility: Designed for SuperMicro SuperServer 5000 Series 5086B-TRF (SYS-5086B-TRF).
• Reliability: All A-Tech memory modules undergo extensive quality control testing to ensure dependable and reliable performance.

Image: A banner highlighting the reliability of A-Tech memory through extensive quality control testing.

4. Setup and Installation

Before beginning the installation process, ensure your SuperMicro SuperServer 5086B-TRF is powered off and disconnected from all power sources. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

Installation Steps:

1. Prepare the System: Power down your SuperServer and unplug all power cables.
2. Access Memory Slots: Open the server chassis to gain access to the motherboard and memory (DIMM) slots. Refer to your SuperMicro SuperServer 5086B-TRF system manual for specific instructions on opening the chassis and locating the memory slots.
3. Handle Memory Modules: Carefully remove the A-Tech memory modules from their packaging. Hold them by the edges, avoiding contact with the gold connectors or the chips.
4. Locate and Open Slots: Identify the appropriate DIMM slots for installation. Gently push down the ejector clips on both ends of the DIMM slot to open them.
5. Align and Insert: Align the notch on the memory module with the key in the DIMM slot. Ensure the module is correctly oriented.
6. Secure the Module: Apply even pressure to both ends of the memory module until it clicks into place and the ejector clips automatically lock the module. Do not force the module if it does not seat easily; re-check alignment.
7. Install Additional Modules: Repeat the process for the second 16GB module, following your server's memory population guidelines (e.g., specific slots for dual-channel or quad-channel configurations).
8. Close and Power On: Once all modules are securely installed, close the server chassis. Reconnect all power cables and power on the system.

Image: A banner illustrating the performance benefits of upgrading with A-Tech memory, showing RAM modules.

5. Operating and Verification

After successful installation and powering on your server, the system should automatically detect the new memory. You can verify the installed memory in the system's BIOS/UEFI settings or within the operating system.

• BIOS/UEFI: During startup, access your server's BIOS/UEFI (usually by pressing DEL, F2, or F10, consult your server manual). Navigate to the system information or memory section to confirm the total installed RAM.
• Operating System:
  • Windows Server: Right-click "This PC" or "My Computer," select "Properties." The installed RAM will be displayed.
  • Linux: Open a terminal and use commands like free -h or dmidecode -t memory.

Ensure the detected memory size matches the 32GB (2 x 16GB) installed and that it is recognized as ECC Registered memory if your system supports and requires it.

6. Maintenance

A-Tech memory modules are designed for long-term reliability and generally require no specific maintenance. However, maintaining a clean and well-ventilated server environment is crucial for the longevity of all internal components, including RAM.

• Dust Removal: Periodically clean the interior of your server to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for this purpose, ensuring the system is powered off.
• Environmental Control: Operate your server in an environment with stable temperature and humidity to prevent component stress.

7. Troubleshooting

If you encounter issues after installing the memory, consider the following troubleshooting steps:

• System Not Booting / No Display:
  • Ensure the memory modules are fully seated in their slots. Gently press down on both ends until the clips lock.
  • Verify that the modules are installed in the correct slots according to your server's motherboard manual.
  • Try installing only one module at a time to identify if a specific module is faulty.
  • Clear the CMOS (Complementary Metal-Oxide-Semiconductor) settings on your motherboard. Refer to your server manual for instructions.
• Incorrect Memory Size Detected:
  • Re-seat all memory modules.
  • Ensure your server's BIOS/UEFI is updated to the latest version, as older versions might not fully support newer memory configurations.
  • Confirm that your server model (SuperMicro SuperServer 5086B-TRF) supports the total amount of RAM installed.
• System Instability / Crashes:
  • Run a memory diagnostic tool (e.g., MemTest86) to check for errors.
  • Ensure proper cooling within the server chassis.

If problems persist, consult your SuperMicro SuperServer 5086B-TRF manual or contact A-Tech support for further assistance.

8. Specifications

9. Warranty and Support

A-Tech memory products come with a Lifetime Warranty, ensuring peace of mind regarding the quality and durability of your purchase.

For technical support, warranty claims, or additional product information, please visit the official A-Tech website or contact their customer service department.

Official Website: atechmemory.com