SYMA X12S-B

SYMA X12 Nano Quadcopter Instruction Manual

Model: X12S-B

1. Introduction

Thank you for purchasing the SYMA X12 Nano Quadcopter. This compact and agile drone is designed for both beginners and experienced pilots, offering stable flight characteristics and easy maneuverability. Please read this manual thoroughly before operating the quadcopter to ensure safe and correct usage.

2. Safety Precautions

3. Package Contents

Verify that all items are present in the package:

4. Product Overview

4.1 SYMA X12 Nano Quadcopter

The SYMA X12 is a 4-channel, 6-axis gyroscope equipped nano quadcopter, providing stable flight and agile performance. Its compact size makes it suitable for indoor flying.

4.2 Remote Control Transmitter

The 2.4G remote control allows for precise command over the quadcopter. Familiarize yourself with its layout:

SYMA X12 Nano Quadcopter Remote Control

Image 1: SYMA X12 Nano Quadcopter Remote Control. This image displays the white and red remote control for the SYMA X12 Nano Quadcopter. It features two main joysticks, a central power button with the SYMA logo, and two directional pads for trim adjustments. The 2.4G frequency indicator is visible in the center. The design is ergonomic, resembling a game controller.

5. Setup

5.1 Battery Charging

  1. Connect the quadcopter's 3.7V 100mAH Li-poly battery to the USB charging cable.
  2. Plug the USB cable into a USB power source (e.g., computer USB port, USB wall adapter).
  3. Charging time is approximately 40 minutes. The indicator light on the USB cable will change (e.g., turn off or change color) when charging is complete.
  4. The remote control can also be used to charge the quadcopter battery. Refer to the remote control's battery compartment for specific instructions on this method.

5.2 Battery Installation

5.3 Binding Procedure

  1. Place the quadcopter on a flat, level surface.
  2. Turn on the quadcopter. The indicator lights will flash.
  3. Turn on the remote control.
  4. Push the left joystick (throttle) all the way up, then all the way down.
  5. The quadcopter's lights will stop flashing and become solid, indicating a successful binding.

6. Operating Instructions

The SYMA X12 offers 4-channel control for comprehensive flight maneuvers. The flying distance is approximately 20 meters, with a flight time of about 4 minutes per charge.

6.1 Basic Flight Controls

6.2 Trim Adjustments

If the quadcopter drifts in any direction during hover, use the trim buttons on the remote control to correct its flight path. Press the trim button opposite to the direction of drift.

6.3 Speed Mode Selection

Press the top left button on the remote control to cycle between two available speed modes (low and high), suitable for different skill levels and environments.

6.4 360° Eversion (Flip)

To perform a 360° flip, press the top right button on the remote control, then quickly push the right joystick in the desired flip direction (forward, backward, left, or right). Ensure sufficient altitude before attempting this maneuver.

6.5 Throw Out to Fly

The SYMA X12 features a "throw out to fly" function. After binding, gently toss the quadcopter into the air and immediately apply throttle to initiate flight. This feature is enabled by its 6-axis gyroscope for stable recovery.

7. Maintenance

8. Troubleshooting

ProblemPossible CauseSolution
Quadcopter does not respond to remote control.Not bound, low battery, remote control off.Perform binding procedure. Charge quadcopter battery. Check remote control batteries and power.
Quadcopter drifts during flight.Improper trim settings, uncalibrated gyroscope.Adjust trim buttons. Place quadcopter on a level surface and re-calibrate the gyroscope (refer to specific instructions in the full manual if available, usually involves holding both joysticks down and to the right/left).
Short flight time.Battery not fully charged, old battery.Ensure battery is fully charged (approx. 40 mins). Consider replacing the battery if it's old.
Propellers not spinning.Obstruction, damaged motor, loose connection.Check for hair or debris tangled in propellers. Inspect motors and connections. Replace damaged propellers.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the retailer where the product was purchased or visit the official SYMA website. Keep your purchase receipt as proof of purchase.