Model: ITVS-550-BK | Brand: innovative Technology
This manual provides essential information for the safe and efficient operation of your it.innovative technology Vintage 3-Speed Portable Suitcase Record Player. Please read this manual thoroughly before using the product and retain it for future reference.
Carefully remove the record player from its packaging. Place the unit on a flat, stable surface away from direct sunlight, heat sources, and excessive dust or moisture. Ensure adequate ventilation around the unit.
Figure 1: The record player in its open position, ready for use.
Figure 2: The record player in its closed, portable suitcase form.
Locate the power cord at the back of the unit. Connect the power adapter to the DC IN jack on the back of the record player, then plug the other end into a standard wall outlet. Ensure the power switch is in the "OFF" position before connecting.
Video 1: Overview of the Victrola Vintage Suitcase Turntable, demonstrating its portability and features.
When the record finishes playing, lift the tone arm and return it to the tone arm rest. If auto-stop is ON, the platter will stop spinning automatically.
Your record player offers several connectivity options:
Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. For the stylus, use a soft brush to gently clean any dust or debris.
The stylus (needle) is a delicate component and will wear out over time. A spare stylus is included with your unit. Refer to the detailed instructions in the separate stylus replacement guide (if provided) or consult the manufacturer's website for proper replacement procedures. A worn stylus can damage your records.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected or outlet not active. | Ensure power cord is securely plugged into the unit and a working wall outlet. Check if the power switch is ON. |
| No sound or low sound | Volume too low, incorrect input selected, or external speakers not connected properly. | Increase volume. Verify input selector is set to PHONO for records or LINE IN/BT for external sources. Check connections to external speakers if used. |
| Record skipping | Record is dirty or scratched, unit is not on a stable surface, or stylus is worn. | Clean the record. Place the unit on a stable, level surface. Consider replacing the stylus. |
| Record plays too fast/slow | Incorrect speed selected. | Adjust the speed selector to match the record's RPM (33 1/3, 45, or 78). |
For warranty information and technical support, please refer to the warranty card included with your product or visit the official innovative Technology website. Keep your purchase receipt as proof of purchase for warranty claims.
For additional assistance, you may contact customer support via the contact information provided on the manufacturer's website.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
