10Gtek 10GBase-LR SFP+ Transceiver User Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your 10Gtek 10GBase-LR SFP+ Transceiver. This module is designed for 10 Gigabit Ethernet applications, offering reliable single-mode fiber connectivity over distances up to 10 km.

Figure 1: 10Gtek 10GBase-LR SFP+ Transceiver module.

2. Important Safety Information

Please read and retain this manual for important information regarding product usage and safety.

Figure 2: Excerpt from the product manual detailing safety and installation.

Important Safety Tips:

• Caution! This product is a static-sensitive device. Always use an ESD wrist strap or similar individual grounding device when handling it or coming into contact with it.
• This product can only be used by professionals.
• Caution! This product has been tested and found to comply with the limits for Class 1 laser. Do not look directly at the light-emitting device.
• Caution! This product is easily contaminated by dust. Please take appropriate measures for dust prevention.

3. Product Features

• Data Rate: 10G
• Wavelength: 1310-nm
• Reach: Up to 10 km
• Fiber Type: Dual LC single-mode fiber
• Wide Compatibility: Compatible with various network equipment from brands such as Cisco SFP-10G-LR, Meraki MA-SFP-10GB-LR, Fortinet, Ubiquiti UniFi UF-SM-10G, Mikrotik, Netgear, D-Link, TP-Link, Linksys, Broadcom, Edge-core, EMC, F5, Meraki, Norkia, QTC, Supermicro, and other open switches.

4. Technical Specifications

5. Setup and Installation

The 10Gtek SFP+ Transceiver is designed for easy installation and removal. Always ensure proper ESD precautions are taken before handling the module.

Installing an SFP/SFP+ Optical Transceiver:

1. Flip the bale clasp up before inserting the SFP module.
2. Line up the SFP module with the port and slide it into the port.
3. Remove the dust cap and insert the fiber optical patch cord.

Removing an SFP/SFP+ Optical Transceiver:

1. Remove the fiber optical patch cord.
2. Open the bale clasp on the SFP module by pressing it down with your index finger.
3. Grasp the SFP module between your thumb and index finger and carefully remove it from the switching module port.

Figure 3: The LC connector end of the SFP+ transceiver.

Figure 4: The SFP+ connector end of the transceiver.

Figure 5: The SFP+ transceiver is designed for easy plug-and-play installation with ESD protection.

6. Operating Instructions

Once installed, the 10Gtek SFP+ Transceiver operates as a plug-and-play device. It facilitates high-speed 10 Gigabit Ethernet connectivity between compatible network devices using single-mode fiber optic cables.

Figure 6: Typical 10G Transceiver Application connecting two 10G switches or a 10G switch to a 10G NIC.

7. Maintenance

To ensure optimal performance and longevity of your 10Gtek SFP+ Transceiver, follow these maintenance guidelines:

• Dust Prevention: Always keep the dust caps on the optical ports when the module is not in use. Dust and debris can significantly degrade optical performance.
• Cleanliness: If cleaning is necessary, use only approved fiber optic cleaning tools and methods. Avoid touching the optical interfaces directly.
• Proper Handling: Always handle the transceiver by its metal casing, avoiding contact with the electrical pins or optical ports.

8. Troubleshooting

If you encounter issues with your 10Gtek SFP+ Transceiver, consider the following:

• No Link Light: Ensure the module is fully inserted into the SFP+ port. Check the fiber optic cable for damage and proper connection. Verify that the connected device (e.g., switch, NIC) is powered on and configured correctly. The link lights on the switch should turn green (or yellow, depending on the switch) when a successful connection is established.
• Performance Issues: Check the quality of the fiber optic cable. Ensure it meets the specifications for 10G transmission over the required distance. Verify that the operating temperature of the environment does not exceed 50°C (122°F), as high temperatures can affect module performance.
• Compatibility: Confirm that your network equipment is compatible with 10Gtek SFP+ transceivers. Refer to the compatibility list in Section 9.
• System Recognition: After installation, check your computer or network management interface to ensure the switch can read the product information from the transceiver.

9. Compatibility

The 10Gtek 10GBase-LR SFP+ Transceiver is widely compatible with various industry-standard network devices. It is designed to work seamlessly with equipment from leading brands, including but not limited to:

• Cisco (e.g., SFP-10G-LR)
• Meraki (e.g., MA-SFP-10GB-LR)
• Ubiquiti UniFi (e.g., UF-SM-10G)
• Mikrotik
• Fortinet
• Netgear
• D-Link
• TP-Link
• Linksys
• Broadcom
• Edge-core
• EMC
• F5
• Norkia
• QTC
• Supermicro

Figure 7: 10Gtek transceivers offer wide compatibility with major network brands.

10. Product Videos

11. Warranty and Support

Limited Warranty:

This product is warranted for three years from the date of purchase. Within this period, 10Gtek, at its option, will repair or replace products that have failed under normal use. Labor and replacement parts will be made at no charge to the customer. All parts or labor must be done by the customer. The customer shall be responsible for any transportation cost. This Limited Warranty does not apply to:

• Any product damage caused by accident, installation accident, natural disasters, misuse, abuse, negligence, or modification.
• Any product damage caused by incorrect operation, poor bad environmental conditions and unauthorized dis-assembly, repair or modification.
• Products that have been modified without authorization, such as the change of internal electronic information, EEPROM information, etc.
• Products damaged by third-party software, upgraded software or upgraded IOS of the switch/router.

To obtain warranty service, please contact your local 10Gtek authorized dealer or original purchase channel for shipping instructions. Securely pack the device and send it to the designated address after approval. Freight is at your charge.

Contact Information:

Tel: (86) 755 29988377
Mail: info@10gtek.com
Address: 209, Building 3, COFCO Business Park, Lia Jian 2nd Road, Baoan, Shenzhen, P.R. China 518133
Technical Support: www.10gtek.com/support

For more information, visit www.sfpcables.com