1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your 10Gtek 10GBase-SR SFP+ LC Transceiver. This module is designed for high-speed 10 Gigabit Ethernet fiber optic networks, offering reliable and efficient data transmission.
The 10Gtek 10GBase-SR SFP+ LC Transceiver is a 10GbE Multimode SFP+ module compatible with both 62.5um and 50um LC cables, supporting OM1/OM2/OM3/OM4 fiber cables. It features a Duplex LC connector, operates at 850nm, includes DDM (Digital Diagnostic Monitoring) functions, and supports distances up to 300 meters.
2. Product Overview
The 10Gtek 10GBase-SR SFP+ LC Transceiver is a compact and robust module built for demanding networking environments. Its design ensures ease of use and broad compatibility.
Key Features:
- 10GBASE-SR SFP+ to LC Optical: Supports 10 Gigabit Ethernet over multimode fiber.
- Multimode Compatibility: Works with 62.5um and 50um LC cables, and OM1/OM2/OM3/OM4 fiber cables.
- Extended Reach: Capable of transmitting data up to 300 meters.
- Wide Compatibility: Compatible with major brands including Cisco SFP-10G-SR, Meraki MA-SFP-10GB-SR, Ubiquiti UniFi UF-MM-10G, Fortinet, Mikrotik, Netgear, D-Link, Supermicro, TP-Link, and other open switches.
- Easy Installation: Plug and play design with full hot-pluggable support and ESD protection.
- Durable Design: Constructed with high-quality alloy for strength and wear resistance.
- Low Power Consumption: Operates with less than 1.05 watts, reducing energy costs.
- Industry Standards: SFP MSA Compliant and IEEE 802.3ae Compliant.
Product Components:
3. Setup and Installation
The 10Gtek SFP+ transceiver is designed for easy plug-and-play installation. Follow these steps to properly install the module into your compatible network device.
Installation Steps:
- Prepare the SFP+ Slot: Ensure the SFP+ slot on your network switch, server, or NIC is clean and free of debris.
- Insert the Transceiver: Line up the SFP+ module with the port and slide it into the port until it clicks into place. The module is hot-pluggable, meaning it can be inserted or removed while the device is powered on.
- Connect Fiber Cable: Remove the protective cover from the LC connector on the transceiver. Connect your multimode LC fiber optic cable to the transceiver. Ensure a secure connection.
- Verify Connection: Check the link status indicators on your network device. A stable green or yellow light (depending on the device) indicates a successful connection.
Removal Steps:
- Disconnect Fiber Cable: Gently disconnect the LC fiber optic cable from the transceiver.
- Open Bale Clasp: Locate the bale clasp (pull handle) on the SFP+ module. Open the bale clasp by pulling it down with your index finger.
- Remove Transceiver: Grasp the SFP+ module between your thumb and index finger and carefully remove it from the switching module port.
Installation Demonstration:
Official 10Gtek video demonstrating the installation process of the 10G SFP+ SR Transceiver into a network switch. This video highlights the ease of plugging the module into a compatible port and connecting the fiber optic cables.
4. Operating Instructions
Once installed, the 10Gtek SFP+ transceiver operates automatically, providing high-speed data connectivity. Ensure your connected devices (switches, servers, NICs) are configured for 10 Gigabit Ethernet for optimal performance.
- Network Configuration: Verify that the SFP+ port on your networking equipment is enabled and configured for 10Gbps operation. Some devices may require manual configuration if auto-negotiation does not set the correct speed.
- Data Transmission: The module will automatically establish a link and begin transmitting data once both ends of the fiber connection are active and properly configured.
- Digital Diagnostic Monitoring (DDM): The transceiver supports DDM, allowing you to monitor real-time parameters such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage. This feature helps in network management and troubleshooting.
Compatibility Testing Demonstration:
Official 10Gtek video showcasing the compatibility testing of their products, including transceivers, with various networking equipment. This demonstrates the rigorous testing process to ensure broad compatibility and reliable operation.
5. Maintenance
The 10Gtek SFP+ transceiver is designed for durability and requires minimal maintenance. However, proper care can extend its lifespan and ensure consistent performance.
- Keep Connectors Clean: Fiber optic connectors are sensitive to dust and dirt. Always use appropriate fiber optic cleaning tools to clean the LC connectors before insertion. Use the protective dust caps when the module is not in use.
- Handle with Care: Avoid dropping the module or subjecting it to excessive force. While durable, it contains sensitive optical components.
- Environmental Conditions: Operate the transceiver within its specified temperature range (0°C to 70°C). Avoid extreme temperatures or humidity, which can affect performance and longevity.
- ESD Protection: Always handle the module with proper ESD (Electrostatic Discharge) precautions, such as wearing an anti-static wrist strap, to prevent damage to sensitive electronic components.
6. Troubleshooting
If you encounter issues with your 10Gtek SFP+ transceiver, consider the following troubleshooting steps:
- No Link Light:
- Ensure the module is fully seated in the SFP+ port.
- Check that the fiber optic cable is securely connected at both ends and is not damaged.
- Verify that the fiber optic cable type (multimode) matches the transceiver's requirements.
- Clean the LC connectors on both the transceiver and the fiber cable.
- Confirm that the SFP+ port on your network device is enabled and configured correctly.
- Intermittent Connection:
- Inspect fiber cables for bends or damage.
- Clean all fiber optic connectors.
- Check for excessive dust or heat in the operating environment.
- Compatibility Issues:
- While widely compatible, some specific vendor equipment might require vendor-coded transceivers. Refer to your network device's documentation for SFP+ compatibility lists.
- Ensure your device firmware is up to date.
- Performance Below Expectation:
- Verify that all connected devices are operating at 10Gbps.
- Check the length of your fiber cable against the 300-meter maximum for SR modules.
- Utilize DDM features (if supported by your network device) to check optical power levels and other parameters.
7. Specifications
| Feature | Description |
|---|---|
| Model Number | BC24658 |
| Product Dimensions | 3.81 x 1.38 x 0.73 inches; 1.76 ounces |
| Transceiver Type | 10GBASE-SR SFP+ |
| Wavelength | 850nm |
| Fiber Type | Multimode Fiber (MMF) |
| Connector Type | Duplex LC |
| Max Distance | 300 meters |
| Power Consumption | Less than 1.05 watts |
| Operating Temperature | 0°C to 70°C |
| Compliance | SFP MSA Compliant, IEEE 802.3ae Compliant |
8. Warranty and Support
10Gtek stands behind the quality of its products.
- Warranty: The 10Gtek 10GBase-SR SFP+ LC Transceiver comes with a 3-Year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
- Money-Back Guarantee: A 30-day Money-Back guarantee is offered for this module.
- Technical Support: Lifetime technical support is available for all 10Gtek products. For assistance, please contact 10Gtek customer service.
- Official User Manual: For a comprehensive user manual in PDF format, please refer to the official document: 10Gtek 1.25G/10G Product Family SFP/SFP+ Optical Transceivers Product Manual (PDF).
