Transcend DrivePro 220 Car Video Recorder with GPS

Introduction

The Transcend DrivePro 220 is a car video recorder designed to capture driving footage. It features a built-in GPS receiver, a wide-angle lens, and a 2.4-inch color LCD screen. Key safety features include a Lane Departure Warning System (LDWS), Forward Collision Warning System (FCWS), and Parking Mode. This manual provides instructions for setup, operation, and maintenance of your DrivePro 220.

Package Contents

Verify that all items are present in your DrivePro 220 package:

• DrivePro 220 Car Video Recorder
• 16GB microSD Memory Card
• Suction Mount
• Car Power Adapter
• Quick Start Guide

Setup

1. Inserting the MicroSD Card

Locate the microSD card slot on the DrivePro 220. Gently insert the provided 16GB microSD card until it clicks into place. Ensure the card is inserted correctly to avoid damage.

2. Mounting the DrivePro 220

Attach the suction mount to a clean, dry area on your vehicle's windshield, ensuring it does not obstruct your view. Secure the DrivePro 220 onto the mount. Adjust the camera angle to capture the road ahead clearly.

Image: The Transcend DrivePro 220 Car Video Recorder, showing the front lens with 'GPS' label and the rear screen displaying a road scene. The device is black with a compact design.

3. Connecting to Power

Connect the car power adapter to your vehicle's cigarette lighter socket. Plug the other end into the power input port on the DrivePro 220. The device will typically power on automatically when the vehicle starts.

4. Initial Settings

Upon first use, or after a reset, the device will prompt you to set the date and time. Use the navigation buttons to adjust these settings for accurate recording timestamps.

5. Cable Concealment

For a tidy installation, route the power cable along the edge of the windshield, under the dashboard, and to the cigarette lighter socket. This helps prevent obstruction and keeps the cable secure.

Operating Instructions

Automatic Recording

The DrivePro 220 begins recording automatically when powered on and stops when the power is disconnected. Recordings are saved in continuous loops, overwriting the oldest files when the memory card is full, unless protected.

Emergency Recording

• G-Sensor Activation: In the event of a sudden impact or collision, the built-in G-Sensor will automatically trigger emergency recording, protecting the current video segment from being overwritten.
• Manual Activation: Press the dedicated emergency recording button on the device to manually protect the current recording segment.

Parking Mode

When Parking Mode is enabled, the DrivePro 220 will automatically begin recording if motion is detected near your parked vehicle, providing surveillance when you are away. This feature requires continuous power supply from the vehicle's battery.

GPS Functionality

The integrated GPS receiver logs your driving coordinates, speed, date, and time directly onto the recorded video footage. This data can be viewed using Transcend's DrivePro Toolbox software on a computer, providing a detailed record of your journey.

Lane Departure Warning System (LDWS)

The LDWS monitors lane markings and alerts the driver with an on-screen visual and an audible warning if the vehicle deviates from its lane at speeds exceeding a preset value. This system is designed to help prevent potential incidents.

Forward Collision Warning System (FCWS)

The FCWS detects the distance to the vehicle ahead and warns the driver with an audible alert if the distance becomes too short, helping to maintain a safe following distance and reduce the risk of rear-end collisions.

Speed Alarm

Configure a speed limit in the device settings. The DrivePro 220 will provide an audible alert if your vehicle exceeds this preset speed, assisting with speed management.

Wi-Fi Connectivity and App Usage

The DrivePro 220 features built-in Wi-Fi. Download the Transcend DrivePro app on your smartphone to connect to the device. The app allows you to view live footage, browse recorded videos, adjust settings, and download files directly to your phone.

Photo Capture

Press the dedicated button on the device to capture still images during recording. These photos are saved separately from video files.

Playback and Data Management

On-Device Playback

Use the device's screen and navigation buttons to review recorded videos directly on the DrivePro 220.

Using DrivePro Toolbox Software

For comprehensive video review and GPS data analysis, transfer the microSD card to a computer and use Transcend's DrivePro Toolbox software. This software displays video footage alongside GPS coordinates, speed, and driving paths.

Accessing Files via Wi-Fi

Connect your smartphone to the DrivePro 220 via Wi-Fi using the DrivePro app to view, download, or delete recorded files without removing the microSD card.

Maintenance

Memory Card Management

Regularly format the microSD card (at least once a month) using the device's menu to ensure optimal performance and prevent data corruption. Replace the memory card if you experience frequent errors or reduced performance.

Cleaning

Use a soft, dry cloth to clean the device's lens and screen. Avoid using abrasive cleaners or solvents that could damage the surfaces.

Troubleshooting

• Device not powering on: Ensure the car power adapter is securely connected to both the device and the vehicle's power socket. Check the vehicle's power socket for functionality.
• Memory Card Error: Reinsert the microSD card. If the error persists, try formatting the card via the device settings or replace it with a new, compatible card.
• Wi-Fi Disconnects/Doesn't Connect: Ensure Wi-Fi is enabled in the device settings. Some settings may reset upon restart, requiring re-activation of Wi-Fi.
• Inaccurate Speed Alarm/LDWS/FCWS: These features rely on clear road markings and GPS signals. Ensure the windshield is clean and the camera lens is unobstructed. Calibrate settings if necessary.
• Poor Night Vision: Ensure the windshield and lens are clean. While the f/1.8 aperture enhances low-light recording, extreme darkness may still limit visibility.
• Suction Mount Detaching: Clean both the suction cup and the windshield surface thoroughly. Ensure the surface is dry before attaching. In hot climates, consider alternative mounting solutions if detachment is frequent.

Specifications

Warranty and Support

The Transcend DrivePro 220 typically comes with a 2-year warranty. For warranty claims or technical support, please refer to the contact information provided in your product packaging or visit the official Transcend website. Ensure you have your product model number (TS16GDP220M) and proof of purchase available when seeking support.