1. Product Overview
The CristalRecord Extra-flat Round 6W LED Downlight is a modern and efficient lighting solution designed for various indoor applications. Its slim profile makes it ideal for installations where space is limited, such as false ceilings. This downlight provides neutral white light at 4000K, ensuring bright and comfortable illumination.
Image 1.1: Front view of the CristalRecord Extra-flat Round LED Downlight. This image shows the sleek, circular design of the downlight with its grey outer ring and white light-emitting surface.
Key features include:
- Extra-flat Design: Only 22mm thick, suitable for various ceiling types, including false ceilings.
- Integrated LED: Features a 6W integrated LED, providing 430 lumens of neutral white light (4000K).
- Energy Saving: Quick start and flicker-free operation. Designed for minimum consumption, potentially saving up to 80% on electricity bills.
- Versatile Application: Made of aluminum, ideal for kitchens, bathrooms, hallways, offices, and commercial premises.
- Driver Included: Comes with the necessary driver for installation.
2. Safety Information
Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other injuries.
- Always disconnect power at the circuit breaker before installation or maintenance.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Do not use this product in wet locations unless specifically rated for such environments. This product has an IP43 rating, suitable for indoor use where it is protected from water spray.
- Ensure the mounting surface can support the weight of the fixture.
- Do not look directly into the LED light source when it is illuminated.
- Keep packaging materials away from children.
3. Setup and Installation
Follow these steps for proper installation of your CristalRecord LED Downlight.
- Prepare the Installation Area: Ensure the power supply to the installation area is turned off at the main circuit breaker.
- Cut the Hole: Using a suitable hole saw, cut a circular opening in the ceiling. The recommended hole diameter is 110 mm.
- Connect Wiring: Connect the downlight's driver to the main electrical supply. Ensure correct polarity (Live, Neutral, Earth) as per local wiring regulations. The downlight operates on an electric cable power source.
- Insert Downlight: Gently push the spring clips on the sides of the downlight upwards and insert the fixture into the prepared hole. The clips will secure the downlight in place.
- Test: Once the downlight is securely installed, restore power at the circuit breaker and test the light.
Image 3.1: Technical diagram showing the dimensions of the downlight (120mm diameter, 22mm height) and the recommended cut-out diameter for installation (110mm).
For optimal lighting, consider combining multiple downlights, especially in larger areas like kitchens.
4. Operating Instructions
The CristalRecord LED Downlight is designed for simple operation.
- Power On/Off: The downlight is controlled by a standard wall switch connected to its electrical circuit. Flip the switch to turn the light on or off.
- Light Quality: This downlight provides a neutral white light at 4000K, which is suitable for general illumination and tasks requiring good visibility.
Image 4.1: An example of the CristalRecord LED Downlight installed in a ceiling, casting a bright, neutral white light downwards, illustrating its illumination effect in a room.
5. Maintenance
The CristalRecord LED Downlight requires minimal maintenance due to its long lifespan of 20,000 hours.
- Cleaning: To clean the surface of the downlight, ensure the power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The LED is integrated and not user-replaceable. If the light stops functioning, the entire unit may need to be replaced.
- Disposal and Recycling: For information on how to clean and dispose of broken or deteriorated bulbs, and for general recycling information for this and other types of bulbs, please refer to local recycling guidelines or visit relevant environmental protection websites.
6. Troubleshooting
If you encounter issues with your downlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch; faulty downlight. | Check circuit breaker. Ensure all connections are secure. Test the switch. If all else fails, the unit may need replacement. |
| Light flickers. | Loose wiring; incompatible dimmer (if applicable, though this model is not specified as dimmable); power fluctuations. | Check wiring connections. Ensure stable power supply. This model is designed for flicker-free operation, so persistent flickering indicates an issue. |
| Light is dim. | Dust accumulation on the diffuser; power supply issue. | Clean the diffuser. Verify stable power supply. |
If the problem persists after attempting these solutions, please contact a qualified electrician or the manufacturer's support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 02-007-06-181 |
| Brand | CristalRecord |
| Power Consumption | 6W |
| Luminous Flux | 430 lumens |
| Color Temperature | 4000K (Neutral White) |
| Lifespan | 20,000 hours |
| Dimensions (Diameter x Height) | 120 mm x 22 mm |
| Cut-out Diameter | 110 mm |
| Material | Aluminum |
| Color | Grey Round |
| Ingress Protection (IP) Rating | IP43 |
| Power Source | Electric Cable |
| Installation Type | Semi-recessed Mounting |
| Intended Use | Indoor (Kitchens, Bathrooms, Hallways, Offices, Commercial Premises) |
8. Warranty and Support
For warranty information and customer support, please refer to the purchase documentation or contact CristalRecord directly through their official website or customer service channels.
This product is manufactured by CristalRecord.
For further assistance, please visit the CristalRecord Brand Page on Amazon.
