Introduction
This manual provides comprehensive parts identification for John Deere 44, 44A, 44AH, and 44H two-bottom tractor-drawn moldboard plows. It is designed to assist owners and technicians in accurately identifying and ordering replacement parts, ensuring proper maintenance and repair of the equipment. Each section includes detailed diagrams and corresponding part lists.
How to Use This Manual
To effectively use this parts manual, follow these steps:
- Locate the Relevant Section: Browse through the manual to find the section pertaining to the specific component or assembly you need to identify. Sections are typically organized by major plow components.
- Identify the Part in the Diagram: Each section features an exploded view diagram. Locate the desired part within this diagram. Parts are typically numbered.
- Match Number to Part List: Refer to the accompanying part list, which corresponds to the numbers in the diagram. The list provides the part number, description, and sometimes the quantity required.
- Verify Model Compatibility: Pay attention to any notes or annotations in the part list or diagram that specify model variations (e.g., 44A, 44AH) or production years, as parts may differ.
Figure 1: Example of a detailed parts diagram showing a plow assembly with numbered components and a key. This page illustrates the combination steel jointer and jointer clamp components.
Interpreting Part Diagrams
Part diagrams are visual representations of assemblies and individual components. They are designed to show how parts fit together and to aid in identification. Key elements to observe include:
- Part Numbers: Each distinct part in the diagram is assigned a unique number.
- Reference Lines: Lines connect the part numbers to the specific components in the diagram.
- Exploded Views: Many diagrams show parts slightly separated from each other to illustrate their relative positions and how they assemble.
- Annotations: Look for notes or symbols that provide additional information, such as torque specifications, special installation instructions, or variations for different models.
Figure 2: Diagram illustrating the cushion spring release hitch assembly for John Deere 44 and 44A plows. This page details various components like bolts, pins, and springs with their respective part numbers and descriptions.
Ordering Replacement Parts
When ordering replacement parts, always provide the complete part number as listed in this manual. It is also beneficial to provide the model number and serial number of your John Deere plow to ensure you receive the correct components. Using genuine John Deere parts is recommended for optimal performance and longevity of your equipment.
- Part Number: Essential for accurate ordering.
- Part Description: Helps confirm the correct part.
- Quantity: Specify how many of each part are needed.
- Plow Model: E.g., John Deere 44, 44A, 44AH, or 44H.
Specifications
This parts manual is specifically for the following John Deere plow models:
- Models Covered: 44, 44A, 44AH, 44H
- Plow Type: Two Bottom Tractor Drawn Moldboard Plows
- Publisher: Jensales
- ASIN: B00TLYG91U
Warranty and Support
This document is a parts identification manual and does not contain warranty information for the John Deere plows or their components. For warranty details regarding your John Deere equipment, please refer to the original owner's manual or contact an authorized John Deere dealer.
For further assistance with parts identification, technical support, or service, please contact your local authorized John Deere dealer or visit the official John Deere website.
