TAG Heuer WAZ111A.BA0875

TAG Heuer Formula 1 WAZ111A.BA0875 Quartz Watch Instruction Manual

Model: WAZ111A.BA0875

Introduction

This instruction manual provides essential information for the proper use and care of your TAG Heuer Formula 1 WAZ111A.BA0875 quartz watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Setup

1. Unlocking the Screw-Down Crown

The TAG Heuer Formula 1 WAZ111A.BA0875 features a screw-down crown to ensure water resistance. Before setting the time or date, gently unscrew the crown counter-clockwise until it springs free from the case. Do not pull forcefully.

2. Setting the Time

  1. Unscrew the crown (if applicable) and pull it out to position 2.
  2. Rotate the crown clockwise or counter-clockwise to move the hands to the desired time. Ensure to account for AM/PM if setting the date.
  3. Once the time is set, push the crown back into position 0 and screw it down tightly to maintain water resistance.

3. Setting the Date

  1. Unscrew the crown (if applicable) and pull it out to position 1.
  2. Rotate the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
  3. Once the date is set, push the crown back into position 0 and screw it down tightly.

4. Adjusting the Bracelet

The stainless steel bracelet can be adjusted by adding or removing links. This procedure requires specialized tools and should be performed by a qualified watchmaker or an authorized service center to prevent damage to the bracelet or clasp.

TAG Heuer Formula 1 WAZ111A.BA0875 watch on a wrist

Image: The TAG Heuer Formula 1 WAZ111A.BA0875 watch displayed on a wrist, showcasing its black dial, silver-tone stainless steel case, and bracelet.

Operating the Watch

Basic Timekeeping

Your watch is a quartz timepiece, known for its accuracy. Once the time and date are set, it will keep precise time until the battery requires replacement or if exposed to strong magnetic fields.

Chronograph Function

The watch features a chronograph for measuring elapsed time. The pushers on the side of the case operate this function:

  • Start/Stop Pusher: Typically the top pusher. Press once to start the chronograph, press again to stop it.
  • Reset Pusher: Typically the bottom pusher. Press to reset the chronograph hands to zero after stopping.

Refer to the specific markings on your watch dial for sub-dial functions (e.g., seconds, minutes, hours for the chronograph).

Water Resistance

This watch is water-resistant to 660 feet (200 meters). This rating makes it suitable for swimming, snorkeling, and recreational diving. Always ensure the crown is fully screwed down before exposing the watch to water. Do not operate the crown or pushers while the watch is submerged.

Maintenance

Cleaning

To clean your watch, use a soft, damp cloth. For the stainless steel case and bracelet, a mild soap solution can be used, followed by rinsing with fresh water and drying thoroughly. Avoid using harsh chemicals or abrasive materials.

Battery Replacement

The quartz movement is powered by a battery. When the battery is depleted, the watch will stop running. Battery replacement should only be performed by an authorized TAG Heuer service center or a professional watchmaker to ensure proper sealing and maintain water resistance.

Water Resistance Checks

It is recommended to have the water resistance of your watch checked annually by an authorized service center, especially if it is frequently exposed to water. Gaskets can degrade over time, affecting the watch's water-tightness.

Storage

When not wearing your watch, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. The original watch box is ideal for storage.

Troubleshooting

  • Watch Not Running: Check if the crown is fully pushed in. If the watch still does not run, the battery may need replacement. Contact an authorized service center.
  • Incorrect Time/Date: Refer to the "Setup" section to correctly set the time and date. Ensure the crown is fully screwed down after adjustment.
  • Condensation Under Crystal: This indicates a loss of water resistance. Immediately take the watch to an authorized service center to prevent further damage to the movement.
  • Chronograph Hands Not Resetting to Zero: This may require a calibration. Consult an authorized service center for assistance.

Specifications

Model NumberWAZ111A.BA0875
BrandTAG Heuer
MovementQuartz
Display TypeAnalog
Case MaterialStainless Steel
Band MaterialStainless Steel
Case Diameter41 mm
Case Thickness12.13 mm
Band Width19 mm
Water Resistance200 meters (660 feet)
Clasp TypeFold-over-clasp
Special FeaturesScrew-down crown, Chronograph, Date display
Dial ColorBlack
Band ColorSilver
Product Weight453 g
Battery Type1 CA123 type battery (Note: This specification may be a data entry error; quartz watches typically use button cell batteries. Consult a professional for correct battery type.)

Warranty and Support

Your TAG Heuer watch is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase for specific terms, conditions, and duration. For service, repairs, or warranty claims, please contact an authorized TAG Heuer service center or the retailer from whom you purchased the watch. Unauthorized repairs or modifications may void your warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.