1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell GC-EM 1742 Electric Lawnmower. Please read this manual thoroughly before operating the device and keep it for future reference.
Safety Instructions
Always observe general safety regulations when working with electrical equipment. Ensure the power supply matches the device's specifications. Keep children and pets away from the operating area. Wear appropriate personal protective equipment, including eye protection and sturdy footwear. Disconnect the power supply before performing any maintenance or cleaning tasks.
2. Product Overview
The Einhell GC-EM 1742 is a powerful electric lawnmower designed for efficient lawn care. It features a robust 1700 Watt Carbon Power Motor and a 42 cm cutting width, suitable for lawns up to 700 m².
Key Features:
- Powerful carbon power motor with high torque.
- Easy to use thanks to low weight and height-adjustable guide handle.
- 6-step central cutting height adjustment.
- Recommended for lawns up to 700 m².
- 50 L clippings box with level indicator.
Components:
Figure 2.1: Front view of the Einhell GC-EM 1742 Electric Lawnmower, showing the main body, handle, wheels, and grass collection box.
Figure 2.2: Top-down view of the Einhell GC-EM 1742 Electric Lawnmower demonstrating its ability to mow close to edges, with the red body and black components visible.
Familiarize yourself with all parts of the lawnmower, including the handle, motor housing, cutting blade (located underneath), grass collection box, and wheels. The height adjustment lever is typically located near the wheels.
3. Setup
3.1 Assembly
- Handle Assembly: Attach the upper and lower handle sections using the provided screws and knobs. Ensure the handle is securely fastened and the cables are not pinched.
- Grass Collection Box: Assemble the grass collection box according to the instructions. Attach it to the rear of the lawnmower, ensuring it clicks securely into place.
- Height Adjustment: Before first use, adjust the cutting height to your desired level. The 6-step central cutting height adjustment allows settings from 20 mm to 65 mm. Locate the adjustment lever (usually near the wheels) and move it to the desired position.
3.2 Initial Checks
- Inspect the power cord for any damage.
- Ensure all screws and fasteners are tight.
- Check that the cutting blade is free from obstructions and securely attached.
4. Operating Instructions
4.1 Starting the Lawnmower
- Connect the power cord to a suitable outdoor power outlet.
- Ensure the grass collection box is correctly attached.
- Press and hold the safety switch (usually a button or lever on the handle) and then pull the operating lever towards the handle. The motor will start.
- Release the safety switch, but continue to hold the operating lever to keep the motor running.
4.2 Mowing Your Lawn
- Mow in overlapping strips to ensure even cutting.
- For best results, mow when the grass is dry.
- Avoid overloading the motor by not attempting to cut excessively long or wet grass in a single pass. Adjust cutting height if necessary.
- The 50-liter grass collection box has a level indicator; empty it when full to maintain optimal performance.
- The design allows for effective edge mowing, reducing the need for additional trimming.
4.3 Stopping the Lawnmower
To stop the lawnmower, simply release the operating lever. The motor will stop automatically due to the integrated 2-point safety switch. Disconnect the power plug from the outlet after use.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Einhell lawnmower. Always disconnect the power plug before performing any maintenance.
5.1 Cleaning
- After each use, clean the underside of the mower deck to remove grass clippings and debris. Use a brush or scraper; avoid using water jets directly on electrical components.
- Clean the grass collection box thoroughly.
- Wipe down the exterior surfaces with a damp cloth.
5.2 Blade Care
Periodically check the cutting blade for sharpness and damage. A dull or damaged blade can lead to poor cutting performance and strain the motor. Blade sharpening or replacement should be performed by a qualified technician or using appropriate safety measures and tools.
5.3 Storage
Store the lawnmower in a dry, well-ventilated area, away from direct sunlight and extreme temperatures. The handle can be folded for compact storage. Ensure the power cord is neatly coiled and stored to prevent damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lawnmower does not start. | No power supply; Safety switch not engaged; Operating lever not pulled. | Check power connection; Ensure safety switch is pressed and operating lever is pulled simultaneously. |
| Motor stops during operation. | Overload (e.g., cutting too thick/wet grass); Power interruption. | Reduce load by raising cutting height or taking smaller passes; Check power connection. |
| Uneven cutting result. | Dull or damaged blade; Incorrect cutting height; Grass collection box full. | Inspect and sharpen/replace blade; Adjust cutting height; Empty grass collection box. |
| Excessive vibration. | Damaged or unbalanced blade; Loose components. | Inspect blade for damage and balance; Tighten all fasteners. If problem persists, seek professional service. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.
7. Technical Specifications
| Specification | Value |
|---|---|
| Model Number | 3400160 |
| Power Source | Corded Electric |
| Voltage | 240 Volts |
| Wattage | 1700 Watts |
| Cutting Width | 42 cm |
| Cutting Height Adjustment | 6-step, 20 mm to 65 mm |
| Grass Collection Box Capacity | 50 Liters |
| Recommended Lawn Area | Up to 700 m² |
| Item Weight | 11.6 Kilograms |
| Product Dimensions | 50.5 x 78 x 35 cm |
| Material | Plastic |
| Color | Red |
| Special Features | Electric Start |
8. Warranty and Support
Einhell products are manufactured to high quality standards and are subject to strict quality controls. This product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage.
Customer Support:
For technical assistance, spare parts, or warranty claims, please contact Einhell customer service. Contact details can typically be found on the Einhell official website or on the product packaging.
When contacting support, please have your product model number (GC-EM 1742) and serial number (if applicable) ready.
