Sylvania FO17/841/ECO Fluorescent Lamp User Manual

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of the Sylvania FO17/841/ECO fluorescent lamp. This 17-watt, 24-inch T8 lamp features a medium bi-pin (G13) base and emits 4100K white light with a Color Rendering Index (CRI) of 82. Designed for indoor use, it offers an average lifetime of 30,000 hours and produces 1350 lumens.

2. Safety Information

WARNING: Risk of electric shock. Always disconnect power before installation, removal, or maintenance.

• Ensure the power supply to the fixture is completely turned off at the circuit breaker before handling the lamp.
• Do not use if the lamp is cracked, broken, or damaged.
• Avoid direct contact with the glass surface of the lamp during operation, as it may be hot.
• This product contains mercury. Handle with care and dispose of properly according to local regulations.
• Do not attempt to modify the lamp or use it in incompatible fixtures.

3. Setup and Installation

Follow these steps to properly install your Sylvania FO17/841/ECO fluorescent lamp:

1. Disconnect Power: Ensure the power to the lighting fixture is completely off at the circuit breaker or wall switch.
2. Remove Old Lamp (if applicable): If replacing an existing lamp, gently twist and pull the old lamp from its lampholders.
3. Align New Lamp: Align the two pins on each end of the Sylvania FO17/841/ECO lamp with the slots in the lampholders of the fixture.
4. Insert and Rotate: Insert the lamp pins into the lampholders. Gently rotate the lamp approximately 90 degrees until it clicks securely into place. Ensure both ends are firmly seated.
5. Restore Power: Once the lamp is securely installed, restore power to the fixture. The lamp should illuminate.

This image displays the Sylvania FO17/841/ECO fluorescent lamp, highlighting its tubular T8 shape and bi-pin base, ready for installation.

4. Operating Instructions

The Sylvania FO17/841/ECO lamp is designed for straightforward operation. After proper installation and power restoration, the lamp will turn on. Fluorescent lamps may require a brief warm-up period to reach full brightness and stable color output, especially in cooler environments. This lamp is intended for standard on/off switching applications.

5. Maintenance

• Cleaning: Periodically clean the lamp with a soft, dry, lint-free cloth. Do not use abrasive cleaners or liquids directly on the lamp surface, as this may damage the coating or compromise performance.
• Replacement: Replace the lamp when it reaches the end of its rated average lifetime (30,000 hours) or if it exhibits signs of failure such as persistent flickering, dimming, or blackening at the ends.
• Always ensure power is disconnected before performing any cleaning or replacement.

6. Troubleshooting

If you encounter issues with your Sylvania FO17/841/ECO lamp, consider the following:

• Lamp Does Not Light:
  • Verify that the power supply to the fixture is on.
  • Ensure the lamp is correctly and securely seated in both lampholders.
  • Check if the ballast in the fixture is functioning correctly. A faulty ballast may prevent the lamp from lighting.
  • If replacing an old lamp, ensure the new lamp is compatible with the fixture's ballast.
• Lamp Flickers or Dims:
  • Flickering can indicate that the lamp is nearing its end of life and needs replacement.
  • A faulty or aging ballast can also cause flickering or dimming.
  • Ensure the ambient temperature is within the recommended operating range for fluorescent lamps.

If problems persist after checking these points, consult a qualified electrician or contact Sylvania customer support.

7. Specifications

8. Disposal Information

This Sylvania fluorescent lamp contains a small amount of mercury. It is crucial to dispose of this product responsibly and in accordance with all local, state, and federal regulations. Do not dispose of fluorescent lamps with general household waste. Please consult your local waste management authority or recycling centers for proper disposal methods and collection points for mercury-containing products.

9. Warranty and Support

For information regarding the product warranty, technical support, or customer service, please refer to the official SYLVANIA website or contact their customer support directly. It is recommended to retain your purchase receipt as proof of purchase for any warranty claims.

SYLVANIA Website: Visit the SYLVANIA Store on Amazon