Lava 10085

Lava 10085 Heavy-Duty Hand Cleaner Bar User Manual

Model: 10085 / 2328390

Introduction

This manual provides instructions for the proper use and care of the Lava 10085 Heavy-Duty Hand Cleaner Bar. This product is designed for effective removal of tough dirt, grease, and grime from hands, utilizing pumice scrubbing particles while being formulated to minimize skin dryness.

Lava Heavy-Duty Hand Cleaner Bar in red and white packaging, showing 'Pumice-Powered' and 'WD-40 Company' logos.

Image: The Lava Heavy-Duty Hand Cleaner Bar, packaged in its distinctive red and white wrapper, highlighting its pumice-powered formula and association with WD-40 Company. The packaging also indicates "NET WT 5.75 OZ. (163g)".

Setup

The Lava 10085 Hand Cleaner Bar requires minimal setup. It is ready for use directly from its packaging.

  1. Unpack: Remove the Lava bar from its protective wrapper.
  2. Placement: Place the bar in a suitable soap dish or holder near a water source, such as a sink in a garage, workshop, or bathroom.

Operating Instructions

Follow these steps for effective hand cleaning:

  1. Wet Hands: Thoroughly wet your hands with warm water.
  2. Apply Soap: Rub the Lava bar between your wet hands to create a lather. Ensure the pumice particles are distributed across the soiled areas.
  3. Scrub: Vigorously rub your hands together, paying close attention to areas with heavy dirt, grease, paint, or grime. The pumice particles will aid in scrubbing away stubborn substances. Continue scrubbing for at least 20 seconds.
  4. Rinse: Rinse your hands thoroughly under running water until all soap and debris are removed.
  5. Dry: Dry your hands with a clean towel.

The formulation is designed to be effective on tough contaminants while being gentle on skin, helping to prevent excessive dryness.

Care and Maintenance

To prolong the life of your Lava Hand Cleaner Bar and maintain hygiene:

Troubleshooting

IssuePossible CauseSolution
Soap softens quicklyPoor drainage in soap dish; excessive moisture.Ensure soap dish drains properly. Store in a dry area when not in use.
Hands not completely cleanInsufficient scrubbing time or lather.Increase scrubbing duration and ensure adequate lather is formed, focusing on heavily soiled areas.
Skin irritation/drynessIndividual skin sensitivity; excessive use.Reduce frequency of use if irritation occurs. Consider applying a hand moisturizer after washing. If irritation persists, discontinue use.

Specifications

Warranty Information

This product is a consumable item. For specific warranty or satisfaction guarantee information, please refer to the manufacturer's official website or contact their customer support directly. General consumer protection laws apply.

Customer Support

For further assistance or inquiries regarding the Lava Heavy-Duty Hand Cleaner Bar, please visit the official WD-40 Company website or contact their customer service department.

Website: www.wd40company.com

Note: Contact information may vary by region. Please check the official website for region-specific details.

Related Documents - 10085

Preview LAVASynC+ Installation Manual: Setup and Software Guide
This document provides a comprehensive guide for installing and setting up the LAVA LAVASynC+ product. It covers software release packages, product setup, installation steps, connection procedures, power options, power-up behavior, utility usage, and technical support.
Preview LAVA Iris502 User Manual - Comprehensive Guide
Detailed user manual for the LAVA Iris502 smartphone, covering setup, features, applications, settings, troubleshooting, safety guidelines, and warranty information.
Preview LAVA A1 Josh User Manual: Features, Safety, and Warranty Information
This user manual provides comprehensive information for the LAVA A1 Josh mobile phone, including its layout, safety precautions, SAR information, e-waste disposal guidelines, and warranty details.
Preview Lava V.300 Premium X, V.300 White & V.300 Black Vacuum Sealer Manual and Safety Instructions
Comprehensive user manual and safety instructions for the Lava V.300 Premium X, V.300 White, and V.300 Black vacuum sealing devices. Covers setup, operation, maintenance, troubleshooting, and technical specifications.
Preview LAVA STS-RBM Installation Manual: Setup and Software Guide
This manual guides users through the installation and software setup of the LAVA STS-RBM, a device enabling charging, USB accessory use, battery modulation, and screen management for select Samsung tablets.
Preview LAVA A1 Colours User Manual and Warranty Information
Comprehensive user manual and warranty details for the LAVA A1 Colours mobile phone, covering safety precautions, e-waste disposal, customer support, and warranty terms.