Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier User Manual

1. Introduction

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. Please read this manual thoroughly before beginning installation and retain it for future reference.

The P4558-20 is a two-light linear island chandelier featuring light umber etched glass shades and an antique bronze finish, designed for indoor use.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
• Consult a qualified electrician if you are unsure about the installation process.
• Use only UL/cUL listed wire connectors.
• Do not exceed the maximum wattage specified for the fixture (100 watts per bulb).
• Handle glass components with care to prevent breakage.
• Ensure the fixture is securely mounted to a structural element of the ceiling.

3. Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product.

• Chandelier fixture assembly
• Mounting hardware (crossbar, screws, wire nuts)
• Glass shades (2)
• Installation sheet

4. Setup and Installation

Follow these steps carefully to install your chandelier. It is recommended to have a second person assist during installation due to the size and weight of the fixture.

Step 1: Prepare for Installation

1. Turn off power at the main circuit breaker or fuse box.
2. Unpack all components and lay them out on a clean, flat surface.
3. Review the included installation sheet for any specific model details.

Step 2: Mount the Fixture

1. Attach the mounting crossbar to the outlet box using the provided screws. Ensure it is securely fastened.
2. Determine the desired hanging height and adjust the suspension rods accordingly. The fixture uses rigid rods for suspension.
3. Carefully lift the fixture towards the ceiling, feeding the electrical wires through the center hole of the mounting crossbar.

Step 3: Electrical Connections

1. Connect the bare copper ground wire from the fixture to the ground wire from the outlet box using a wire nut.
2. Connect the white wire from the fixture to the white (neutral) wire from the outlet box using a wire nut.
3. Connect the black wire from the fixture to the black (hot) wire from the outlet box using a wire nut.
4. Ensure all wire connections are secure and tucked neatly into the outlet box.

Step 4: Secure the Fixture and Install Shades

1. Attach the fixture canopy to the mounting crossbar, securing it with the decorative nuts or screws provided.
2. Carefully place the light umber etched glass shades onto the fixture's lamp holders, securing them according to the specific design (typically with threaded rings).

Step 5: Install Light Bulbs

1. Insert two (2) medium-base light bulbs (not included) into the sockets. Do not exceed 100 watts per bulb.

Figure 4.1: Fully assembled Progress Lighting P4558-20 Spirit Two-Light Linear Island Chandelier. This image shows the antique bronze frame, the two light umber etched glass shades, and the suspension rods extending upwards, ready for ceiling mounting.

Step 6: Restore Power

1. Restore power at the main circuit breaker or fuse box.
2. Test the fixture to ensure proper operation.

5. Operating Instructions

The Progress Lighting P4558-20 chandelier operates via a standard wall switch (not included) connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture on or off.

Note: This fixture is designed for use with a standard AC power source (120 Volts) and does not include an integrated control method like an app or push button as a primary control for the fixture itself, but rather refers to potential external control systems it might be compatible with.

6. Maintenance

Cleaning

• Always disconnect power before cleaning.
• To clean the fixture, wipe with a soft, dry cloth.
• Do not use abrasive cleaners, polishes, or solvents as they may damage the finish or glass.
• For glass shades, a mild glass cleaner can be used on a cloth, then wipe dry.

Bulb Replacement

• Ensure power is off and bulbs have cooled before attempting to replace them.
• Unscrew the old bulb from the socket.
• Screw in a new medium-base bulb, ensuring it does not exceed 100 watts.

7. Troubleshooting

8. Specifications

• Model: P4558-20
• Brand: Progress Lighting
• Material: Glass, Metal
• Finish: Antique Bronze
• Shade Material: Etched Glass (Light Umber)
• Number of Light Sources: 2
• Wattage: 100 watts (max per bulb)
• Voltage: 120 Volts
• Item Weight: 11.66 Pounds
• Assembly Required: Yes
• Mounting Type: Ceiling Mount
• Dimensions (Approximate): Length: 36.00 in., Width: 13.12 in., Height: 23.62 in.

9. Warranty and Support

This product is covered by a manufacturer's warranty. For specific warranty details, claims, or technical support, please refer to the documentation included with your purchase or contact Progress Lighting directly.

Manufacturer: HI- Progress Lighting

For further assistance, visit the official Progress Lighting website or contact their customer service department.