Introduction
This manual provides essential information for the safe and effective use of your ESafety Lights B1L120 LED Beacon Light. The B1L120 is a compact yet powerful 360-degree LED beacon designed for various applications including security, construction, utility, marine, truck, trailer, and airport environments. It operates on 110V-120V AC power and features a non-flashing, steady-on illumination.
Please read this manual thoroughly before installation and operation to ensure proper functionality and to prevent damage or injury.
Safety Information
Always adhere to the following safety guidelines:
- Ensure power is disconnected before installation, maintenance, or troubleshooting.
- Installation should be performed by a qualified professional if you are unsure about electrical wiring.
- Verify that the power supply matches the specified voltage (110V-120V AC).
- Do not open or modify the unit. There are no user-serviceable parts inside.
- Keep the unit away from excessive heat, moisture, and corrosive substances.
- Mount the beacon securely to prevent accidental dislodgement.
Product Overview
The B1L120 LED Beacon Light is designed for high visibility and durability. Its compact form factor makes it suitable for various mounting locations.
Figure 1: Front view of the ESafety Lights B1L120 Yellow LED Beacon Light. This image shows the compact design and the yellow Fresnel lens.
Figure 2: The B1L120 Yellow LED Beacon Light illuminated, demonstrating its steady-on, non-flashing light output.
Key features include:
- 360-degree signal visibility.
- Durable polycarbonate and nylon housing.
- Impact and shock-resistant Fresnel lens.
- Designed for permanent mounting.
- Operates on 110V-120V AC.
Setup and Installation
The B1L120 beacon is designed for permanent mounting. Ensure the mounting surface is stable and can support the unit.
Package Contents:
- B1L120 LED Beacon Light
- Mounting hardware (screws, nuts, washers, wire connectors)
- Foam bottom basket
Figure 3: Included mounting hardware for the B1L120 beacon. This includes screws, nuts, washers, and wire connectors.
Figure 4: Dimensional drawing of the B1L120 beacon, showing its height of 5.38 inches and base dimensions of 3.94 x 2.80 inches.
Mounting Steps:
- Select Location: Choose a mounting location that provides optimal visibility and is protected from direct impact. Consider the beacon's dimensions (3.94 x 2.8 x 5.38 inches).
- Mark Holes: Use the base of the beacon as a template to mark the two mounting hole positions on the surface.
- Drill Holes: Drill appropriate pilot holes for the mounting screws.
- Secure Base: Place the foam bottom basket (if desired for vibration dampening or sealing) and then the beacon base over the drilled holes. Secure the beacon using the provided screws, washers, and nuts.
- Wiring: Connect the beacon's power wires to a 110V-120V AC power source. Ensure all connections are secure and insulated using the provided wire connectors or other suitable methods. Observe local electrical codes.
Operating Instructions
The B1L120 LED Beacon Light is designed for simple operation once installed.
- Power On: Once properly wired and mounted, apply 110V-120V AC power to the unit.
- Illumination: The LED beacon will immediately illuminate with a steady-on, non-flashing yellow light.
- Power Off: To turn off the beacon, disconnect the power supply.
The beacon does not have an integrated on/off switch and is controlled by the external power source it is connected to.
Maintenance
The B1L120 LED Beacon Light requires minimal maintenance due to its durable construction and LED technology.
- Cleaning: Periodically clean the outer lens with a soft, damp cloth to remove dust and debris. Avoid abrasive cleaners or solvents.
- Inspection: Regularly inspect the mounting hardware and wiring connections to ensure they remain secure and free from corrosion or damage.
- LED Lifespan: The LED light source has a long operational lifespan and does not require replacement under normal operating conditions.
Do not attempt to open the unit for internal cleaning or repair. This will void any potential warranty.
Troubleshooting
If you encounter issues with your B1L120 LED Beacon Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not illuminate. | No power supply; incorrect wiring; faulty power source. | Verify power is supplied to the unit. Check all wiring connections for proper contact and insulation. Test the power source. |
| Light is dim or flickers. | Insufficient voltage; loose connection; internal component issue. | Ensure the power supply is stable 110V-120V AC. Check wiring for loose connections. If problem persists, contact customer support. |
| Physical damage to lens or housing. | Impact or environmental stress. | Assess damage. If functionality is compromised or safety is a concern, replace the unit. |
If troubleshooting steps do not resolve the issue, please contact ESafety Lights customer support.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | B1L120 |
| Brand | ESafety Lights |
| Light Source Type | LED |
| Color | Yellow |
| Voltage | 110V - 120V AC |
| Operation | Steady-On, Non-Flashing |
| Material | Polycarbonate (PC), Nylon |
| Item Weight | 10 Ounces (approx. 0.28 kg) |
| Product Dimensions (L x W x H) | 3.94 x 2.8 x 5.38 inches (approx. 10 x 7.1 x 13.7 cm) |
| UPC | 635510697299 |
| Country of Origin | USA |
Warranty and Support
ESafety Lights products are manufactured to high standards. For information regarding warranty coverage, please refer to the terms provided at the time of purchase or contact ESafety Lights directly.
This product is eligible for a 30-day return policy for refund or replacement, as per standard retail terms.
For technical support or inquiries, please visit the official ESafety Lights website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.