Product Overview
Mastisol Liquid Medical Adhesive is a non-water soluble, latex-free adhesive designed for securement of dressings, tapes, and medical devices. It forms a durable yet flexible bond, maintaining adherence even with perspiration, showering, and patient movement. This product is compatible with chlorhexidine gluconate (CHG).
Image: A 2 fluid ounce (59 mL) bottle of Mastisol Liquid Adhesive. The label indicates it is for difficult dressings, is latex-free, and is marketed by Eloquest Healthcare, Inc. and manufactured by Ferndale Laboratories, Inc.
What's in the Box
- Mastisol Liquid Adhesive (2 fl oz / 59 mL bottle)
Setup and Preparation
- Skin Preparation: Ensure the skin area where the adhesive will be applied is clean, dry, and free of oils or lotions.
- Application Area: Identify the precise area for dressing or device placement.
- Ventilation: Use in a well-ventilated area.
Operating Instructions
Follow these steps for effective application of Mastisol Liquid Medical Adhesive:
- Open Bottle: Carefully open the Mastisol bottle. The bottle typically has a small opening for controlled dispensing.
- Apply Adhesive: Apply a thin, uniform layer of Mastisol to the skin area where the dressing or device will be placed. Avoid applying directly to open wounds or mucous membranes.
- Allow to Dry: Allow the adhesive to become tacky, typically within 30 seconds to 1 minute. Do not apply the dressing or device while the adhesive is still wet.
- Secure Dressing/Device: Once tacky, firmly apply the dressing, tape, or medical device to the prepared skin area. Ensure good contact and smooth out any wrinkles.
- Post-Application: The adhesive forms a strong bond that is resistant to water and perspiration, providing extended wear.
Key Benefits:
- Extended-Wear Securement: Non-water soluble formula creates a strong, flexible bond that helps keep dressings, tapes, and small medical devices firmly in place, even in high-moisture areas.
- Fewer Unplanned Changes: Reliable adhesion reduces edge lift and displacement, supporting uninterrupted therapy and minimizing the need for unscheduled dressing replacements.
- Versatile & Compatible: Clinically proven to boost the sticking power of most medical tapes, CHG-impregnated dressings, catheter securement devices, and steri-strips; latex-free and gentle on skin.
- Supports Infection-Control Protocols: Forms an occlusive seal that helps block external contaminants when used as part of standard facility procedures.
Maintenance and Removal
Mastisol is designed for long-lasting adhesion. When removal is necessary, use an appropriate adhesive remover or medical-grade solvent. Gently peel the dressing or device while applying the remover to minimize skin trauma.
Storage: Store Mastisol at room temperature, away from direct sunlight and heat. Keep the bottle tightly closed when not in use to prevent evaporation.
Troubleshooting
- Adhesive not sticking: Ensure skin is clean and dry before application. Allow adhesive to become tacky before applying dressing.
- Skin irritation: Discontinue use if irritation occurs. Consult a healthcare professional. Ensure proper removal techniques are used to avoid skin stripping.
- Difficulty removing: Use a medical adhesive remover specifically designed for strong medical adhesives.
- Strong odor: The product has a characteristic odor that dissipates after application. Ensure use in a well-ventilated area.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Mastisol Liquid Medical Adhesive |
| Model Number | FER-0523-06 |
| Volume | 2 fl oz (59 mL) |
| Latex-Free | Yes |
| Water Solubility | Non-water soluble |
| Dimensions | 1.5 x 4.7 x 1.4 inches (Product) |
| Weight | 0.32 ounces (Product) |
| Manufacturer | Ferndale Laboratories, Inc. |
Warranty Information
Specific warranty details for Mastisol Liquid Medical Adhesive are typically provided by the distributor or manufacturer at the point of purchase. For information regarding product quality or defects, please contact the manufacturer directly using the support information provided below.
Support and Contact Information
For technical assistance, product inquiries, or support, please contact:
- Marketed by: Eloquest Healthcare®, Inc.
- Toll-Free: (877) 433-7626
- Website: www.eloquesthealthcare.com
- Manufactured by: Ferndale Laboratories, Inc.
- Address: Ferndale, MI 48220 U.S.A.