Transcend 2GB Standard Secure Digital (SD) Memory Card

1. Product Overview

This manual provides instructions for the Transcend 2GB Standard Secure Digital (SD) Memory Card, designed for reliable data storage in compatible devices such as digital cameras. This card offers a storage capacity of 2 gigabytes and adheres to the Class 10 speed standard, ensuring efficient read and write operations.

An image of the Transcend 2GB Standard Secure Digital (SD) Memory Card, featuring a blue casing with a colorful label displaying 'Transcend', 'SD', and '2GB'. A small 'LOCK' switch is visible on the side.

Key Features:

• Storage Capacity: 2GB
• Speed Class: Class 10 (for efficient data transfer)
• Read Speed: Up to 20 MB/s
• Write Speed: Up to 13 MB/s
• Compatibility: Designed for devices with an SD card slot, including the Kodak P850 Digital Camera.
• Lock Switch: Integrated write-protection switch to prevent accidental data deletion.

2. Setup and Installation

Follow these steps to properly install your Transcend SD Memory Card into a compatible device.

1. Locate the SD Card Slot: Identify the SD card slot on your device (e.g., digital camera, card reader). Refer to your device's manual for exact location and orientation.
2. Check the Lock Switch: Ensure the small lock switch on the side of the SD card is in the unlocked position (usually towards the top or away from the contacts) if you intend to write data to the card. If the switch is in the locked position, the card will be write-protected, and you will only be able to read data from it.
3. Insert the Card: Gently slide the SD card into the slot with the metal contacts facing the correct direction, as indicated by your device. Apply gentle, even pressure until the card clicks into place. Do not force the card, as this may damage the card or the device.
4. Verify Recognition: Turn on your device and check if the SD card is recognized. Most devices will display an icon or message indicating the presence of a memory card.

3. Operating Instructions

Once installed, the Transcend SD Memory Card functions as your device's primary storage for photos, videos, and other data.

Data Storage:

• When using the card in a digital camera (e.g., Kodak P850), all captured images and videos will be saved directly to the card until its capacity is reached.
• For other devices, the card will appear as a removable storage drive, allowing you to save and access files as you would with any other storage medium.

Data Transfer:

• To transfer data to a computer, you can either connect your device directly to the computer (if supported) or remove the SD card and insert it into a compatible card reader connected to your computer.
• Once connected, the card will appear as a removable drive. You can then copy, paste, or move files between the card and your computer.

Formatting the Card:

Formatting an SD card erases all data on it and prepares it for use. This is often necessary when using a new card or when experiencing data corruption. Warning: Formatting will permanently delete all data on the card. Back up important files before proceeding.

• It is recommended to format the card using the device it will primarily be used with (e.g., your digital camera) to ensure optimal compatibility.
• Consult your device's manual for specific instructions on how to format an SD card.

4. Maintenance and Care

Proper care will extend the lifespan of your Transcend SD Memory Card and protect your data.

• Handle with Care: Avoid bending, dropping, or applying excessive force to the card.
• Protect Contacts: Do not touch the metal contacts on the card. Keep them clean and free from dust, dirt, or moisture.
• Storage: Store the card in its protective case or a suitable storage solution when not in use to prevent physical damage and exposure to static electricity.
• Temperature and Humidity: Avoid exposing the card to extreme temperatures, direct sunlight, or high humidity.
• Safe Removal: Always safely eject the card from your computer or device before physically removing it to prevent data corruption. For cameras, ensure the device is powered off or in a safe removal mode.

5. Troubleshooting

If you encounter issues with your Transcend SD Memory Card, try the following solutions:

Card Not Recognized:

• Reinsert the Card: Remove the card and reinsert it firmly into the slot, ensuring it is correctly seated.
• Check Lock Switch: Verify that the lock switch on the side of the card is in the unlocked position. If it's locked, the device might not be able to write to it, and some devices may not recognize it properly.
• Try Another Device/Reader: Test the card in a different compatible device or card reader to determine if the issue is with the card or the original device.
• Clean Contacts: Gently clean the metal contacts on the card with a soft, dry, lint-free cloth.

Cannot Write/Save Data:

• Check Lock Switch: Ensure the lock switch is in the unlocked position. This is the most common reason for write protection.
• Card Full: Verify that the card has sufficient free space. Delete unnecessary files or transfer them to another storage device.
• File System Error: The card's file system might be corrupted. Back up any accessible data and then format the card (see Section 3).

Slow Performance:

• Card Fragmentation: Over time, files can become fragmented, leading to slower performance. Back up data and format the card.
• Device Compatibility: Ensure your device supports Class 10 SD cards for optimal performance. Older devices might not fully utilize the card's speed.

6. Specifications

Detailed technical specifications for the Transcend 2GB Standard Secure Digital (SD) Memory Card.

7. Warranty and Support

For information regarding product warranty, technical support, or service, please contact Transcend directly. You can find contact details and support resources on the official Transcend website.

Transcend also offers optional protection plans for data recovery. For details on these plans, please refer to the purchase documentation or the Transcend website.

Transcend Official Website: www.transcend-info.com