1. Product Overview
The DSLRKIT 95mm Mount to Bowens Mount Adapter is a robust accessory designed to bridge compatibility between flash heads with a 95mm mini mount and a wide range of light modifiers featuring the industry-standard Bowens mount. This adapter allows photographers to utilize various Bowens-mount softboxes, snoots, beauty dishes, and lamp shades with their existing mini-mount flash units, expanding creative lighting possibilities without requiring new flash equipment.
Figure 1: Top-down view of the DSLRKIT 95mm Mount to Bowens Mount Adapter, showing its circular design and adjustment screws.
Key Features:
- Universal Compatibility: Adapts 95mm mini-mount flash heads to Bowens-mount accessories.
- Durable Construction: Made from high-quality metal for long-lasting performance and stability.
- Secure Attachment: Features multiple set screws to firmly secure the adapter to your flash unit.
- Easy Setup: Designed for quick and straightforward installation.
- Versatile Use: Ideal for use with various studio flash units, including 160W, 250W, and 300W models.
2. Parts List
The DSLRKIT 95mm Mount to Bowens Mount Adapter consists of the following primary components:
- Adapter Ring: The main metal body of the adapter, featuring both the 95mm mini mount and the Bowens mount.
- Set Screws (x3): Threaded screws used to tighten and secure the adapter onto the flash head.
Figure 2: Angled view of the adapter, highlighting the Bowens mount side and the set screws.
3. Setup Instructions
Follow these steps to properly attach the DSLRKIT 95mm Mount to Bowens Mount Adapter to your flash head and then to a Bowens-mount accessory.
- Prepare Your Flash Head: Ensure your flash head has a 95mm diameter mini mount. Power off and unplug your flash unit before proceeding.
- Attach the Adapter to Flash Head:
Carefully slide the 95mm side of the adapter onto the front of your flash head. The adapter should fit snugly around the flash tube and reflector.
Figure 3: Close-up view of the adapter's interior, illustrating the mechanism for securing it to the flash head.
- Secure the Adapter:
Once the adapter is in place, gently tighten the three set screws located around the circumference of the adapter. Tighten them evenly until the adapter is firmly secured to the flash head and does not wobble. Do not overtighten, as this may damage your flash unit.
- Attach Bowens-Mount Accessory:
Align the Bowens-mount accessory (e.g., softbox, snoot) with the Bowens side of the adapter. Insert the accessory into the adapter and rotate it clockwise until it clicks into place, indicating a secure lock.
- Verify Connection:
Gently tug on the attached accessory to ensure it is securely mounted and will not accidentally detach during use.
4. Operating Instructions
Once the adapter and your chosen Bowens-mount accessory are securely attached, you can operate your flash unit as usual. The adapter facilitates the physical connection and does not interfere with the electronic or functional operation of your flash or light modifier.
- Ensure all connections are secure before powering on your flash unit.
- Adjust your light modifier (e.g., rotate softbox) as needed for optimal lighting.
- When disassembling, first remove the Bowens-mount accessory by pressing its release button (if applicable) and rotating counter-clockwise. Then, loosen the three set screws on the adapter to remove it from the flash head.
5. Maintenance
Proper maintenance ensures the longevity and reliable performance of your adapter.
- Cleaning: Wipe the adapter with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents, which may damage the finish.
- Storage: Store the adapter in a dry, cool place away from direct sunlight and extreme temperatures. If not in use for extended periods, consider storing it in its original packaging or a protective bag to prevent scratches and dust accumulation.
- Inspection: Periodically inspect the set screws and the adapter body for any signs of wear, damage, or deformation. Ensure the threads of the set screws are clean and move freely.
6. Troubleshooting
This section addresses common issues you might encounter with the adapter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter does not fit flash head. | Flash head diameter is not 95mm. | Verify your flash head's mount diameter. This adapter is specifically designed for 95mm mini mounts. |
| Bowens accessory does not lock into place. | Accessory is not a standard Bowens mount, or not properly aligned. | Ensure the accessory is a genuine Bowens mount. Align the accessory correctly with the adapter's locking mechanism and rotate firmly until it clicks. |
| Adapter feels loose on flash head. | Set screws are not tightened sufficiently. | Gently tighten the three set screws evenly until the adapter is secure. Do not overtighten. |
7. Specifications
| Product Name | 95mm Mount to Bowens Mounts Ring Studio Adapter |
| Model Number | Bowens 95mm |
| Brand | DSLRKIT |
| Bracket Fitting (Flash Side) | Mini Mount (95mm diameter) |
| Bracket Connection (Accessory Side) | Bowens Mount |
| Material | Metal |
| Item Weight | 7 ounces (approximately 198 grams) |
| Package Dimensions | 5.43 x 5.43 x 2.6 inches (approximately 13.8 x 13.8 x 6.6 cm) |
8. Warranty and Support
DSLRKIT products are manufactured to high-quality standards. For specific warranty information regarding your 95mm Mount to Bowens Mount Adapter, please refer to the warranty card included with your purchase or visit the official DSLRKIT website.
If you encounter any issues or require technical assistance, please contact DSLRKIT customer support through their official channels. When contacting support, please have your product model number (Bowens 95mm) and purchase details ready.
Please note: Warranty terms and support availability may vary by region and retailer.
