Klipsch IC-650-TWH Outdoor/Surround Ceiling Speaker User Manual

Introduction

Thank you for purchasing the Klipsch IC-650-TWH Outdoor/Surround Ceiling Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before beginning installation to ensure optimal performance and safety.

The Klipsch IC-650-TWH is designed for commercial and outdoor applications, offering robust sound performance and easy integration into various environments. Its durable construction ensures reliable operation in diverse conditions.

Safety Information

Please observe the following safety precautions to prevent damage to the speaker or injury to yourself:

• Installation: Ensure all wiring is correctly connected and secured. Consult a qualified installer if you are unsure about any part of the installation process.
• Power: Disconnect power to the audio system before making any connections.
• Placement: Install the speaker in a location that can structurally support its weight (11 pounds).
• Moisture: While designed for outdoor use, avoid direct exposure to extreme weather conditions or submersion in water. The product is NOT waterproof.
• Cleaning: Use only a dry, soft cloth for cleaning. Avoid abrasive cleaners or solvents.
• Proposition 65 Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Package Contents

Verify that all items are present in the package:

• 1 x Klipsch IC-650-TWH Ceiling Speaker
• Installation Template (if applicable)
• Mounting Hardware (if applicable)

Note: Additional wiring and audio equipment are sold separately.

Setup and Installation

The Klipsch IC-650-TWH is designed for easy installation in ceilings, particularly with the use of a tile bridge for commercial ceiling grids.

Pre-Installation Checklist:

• Ensure the mounting surface (ceiling) can support the speaker's weight.
• Verify that there is sufficient clear space behind the mounting surface for the speaker's depth (approximately 11 inches).
• Have appropriate speaker wire (e.g., 16-gauge or 14-gauge) ready.
• Gather necessary tools: drill, drywall saw (if cutting new hole), wire strippers, screwdriver.

Installation Steps:

1. Determine Placement: Choose an optimal location in the ceiling for sound dispersion. Consider obstructions like joists, pipes, or electrical conduits.
2. Cut Opening: Use the provided template (if included) to trace the cutout hole on the ceiling. Carefully cut the opening using a drywall saw. The speaker requires an opening suitable for its 7-inch woofer and overall dimensions.
3. Run Speaker Wire: Route the speaker wire from your amplifier/receiver to the cutout opening. Leave enough slack for connections.
4. Connect Wiring: Strip approximately 1/2 inch of insulation from the speaker wire ends. Connect the positive (+) terminal of the speaker to the positive (+) terminal of your amplifier, and the negative (-) terminal of the speaker to the negative (-) terminal of your amplifier. Ensure a secure connection. The IC-650-TWH supports 70-volt systems, so ensure your amplifier is compatible and correctly configured.
5. Insert Speaker: Carefully insert the speaker into the cutout opening. The speaker features dog-leg clamps that will secure it to the ceiling.
6. Secure Speaker: Tighten the mounting screws on the front baffle of the speaker. This will rotate the dog-leg clamps outwards and clamp the speaker firmly to the ceiling. Do not overtighten.
7. Attach Grille: Once the speaker is secured, attach the magnetic grille to the speaker baffle. Ensure it is flush with the ceiling surface.

Image: The Klipsch IC-650-TWH ceiling speaker, showing both the front with the perforated white grille and the rear revealing the 7-inch woofer and mounting mechanism. This illustrates the speaker's design for flush ceiling installation.

For commercial installations, a tile bridge (sold separately) can be used to distribute the speaker's weight across ceiling tiles, providing additional support and stability.

Operating Instructions

Once installed and connected to a compatible audio amplifier, the Klipsch IC-650-TWH operates as a passive speaker. Its operation is controlled entirely by the connected audio source and amplifier.

• Power On: Turn on your audio amplifier/receiver.
• Source Selection: Select the desired audio source (e.g., music player, radio, streaming device) on your amplifier.
• Volume Control: Adjust the volume level using your amplifier's controls. Start with a low volume and gradually increase it to a comfortable listening level.
• 70-Volt System: If connected to a 70-volt commercial audio system, ensure the amplifier's output and the speaker's tap settings (if adjustable, typically on the speaker itself) are correctly matched for the desired power output per speaker.

The speaker is designed to deliver clear and deep bass audio for various commercial and outdoor applications.

Maintenance

The Klipsch IC-650-TWH speaker requires minimal maintenance to ensure long-lasting performance.

• Cleaning: Periodically wipe the speaker grille and surrounding area with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners, sprays, or abrasive materials.
• Inspection: Occasionally inspect the speaker for any visible damage or loose connections.
• Environmental Considerations: While suitable for outdoor use, protect the speaker from direct, prolonged exposure to extreme weather conditions (e.g., heavy rain, snow, direct sunlight for extended periods) to maximize its lifespan.

Troubleshooting

If you encounter issues with your Klipsch IC-650-TWH speaker, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Klipsch customer support.

Specifications

Warranty and Support

The Klipsch IC-650-TWH speaker comes with a Limited Warranty. For specific terms and conditions of your warranty, please refer to the warranty card included with your product or visit the official Klipsch website.

For technical support, troubleshooting assistance, or warranty claims, please contact Klipsch Customer Service:

• Website: www.klipsch.com/support
• Phone: Refer to the Klipsch website for regional contact numbers.

Please have your product model number (IC-650-TWH) and purchase date available when contacting support.