Girmi CE85 Slow Juicer Instruction Manual

1. Introduction

Thank you for purchasing the Girmi CE85 Slow Juicer. This appliance is designed to efficiently extract juice from various fruits and vegetables, providing fresh and nutritious beverages. Please read this instruction manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

The Girmi CE85 features a durable stainless steel construction, a 1-liter juice container capacity, and a powerful 400W motor. Its slow juicing technology is designed for efficient extraction, and the reverse function, along with the included cleaning brush, simplifies maintenance.

2. Important Safety Instructions

• Read all instructions before use.
• Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting.
• Do not immerse the motor base in water or any other liquid.
• Keep hands and utensils out of the feeding chute during operation to prevent injury and damage to the appliance. Use the food pusher provided.
• Unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner.
• This appliance is for household use only. Do not use outdoors.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not attempt to repair the appliance yourself. Contact qualified service personnel for repairs.

3. Product Components

Familiarize yourself with the parts of your Girmi CE85 Slow Juicer:

1. Food Pusher
2. Feeding Chute
3. Top Cover
4. Auger (Squeezing Screw)
5. Filter Basket (Stainless Steel)
6. Juicing Bowl (Clear)
7. Pulp Outlet
8. Juice Outlet with Cap
9. Motor Base with Control Knob (Off/On/Reverse)
10. Juice Container (1 Liter)
11. Pulp Container (1 Liter)
12. Cleaning Brush

Figure 1: Fully assembled Girmi CE85 Slow Juicer. The image displays the silver base unit with a control knob, a clear juicing chamber, a stainless steel filter, and a black top assembly including the feeding chute and pusher. A transparent pulp outlet is visible on the side.

4. Setup and Assembly

Before first use, wash all removable parts (except the motor base) in warm, soapy water, rinse thoroughly, and dry. Ensure all parts are completely dry before assembly.

1. Place the motor base on a stable, flat, and dry surface.
2. Align the juicing bowl with the motor base and rotate it clockwise until it locks securely into place.
3. Insert the filter basket into the juicing bowl, ensuring it sits firmly.
4. Place the auger (squeezing screw) into the center of the filter basket.
5. Attach the top cover, aligning the marks on the cover with those on the juicing bowl, and rotate clockwise until it locks.
6. Position the juice container under the juice outlet and the pulp container under the pulp outlet.

5. Operating Instructions

Follow these steps for optimal juicing:

1. Prepare your ingredients: Wash fruits and vegetables thoroughly. Cut them into pieces small enough to fit into the feeding chute. Remove any hard seeds, pits, or thick peels (e.g., citrus peels).
2. Ensure the juice and pulp containers are in place.
3. Plug the appliance into a suitable power outlet.
4. Turn the control knob to the "On" position. The auger will begin to rotate.
5. Gradually feed the prepared ingredients into the feeding chute. Use the food pusher to gently guide the ingredients down. Do not force ingredients, as this can strain the motor.
6. The juicer will separate the juice from the pulp. Fresh juice will flow into the juice container, and pulp will be expelled into the pulp container.
7. Once juicing is complete, turn the control knob to the "Off" position and unplug the appliance.
8. Reverse Function: If ingredients become jammed during operation, turn the control knob to the "R" (Reverse) position for a few seconds. This will rotate the auger in the opposite direction to clear the blockage. Then, switch back to "Off" and then "On" to resume juicing.

6. Maintenance and Cleaning

Regular cleaning ensures the longevity and hygiene of your juicer.

1. Immediate Cleaning: After each use, turn off and unplug the juicer.
2. Disassemble the juicer by reversing the assembly steps.
3. Rinse all removable parts (top cover, auger, filter basket, juicing bowl, juice/pulp containers, food pusher) under running water to remove large pulp residues.
4. Hand Wash Only: Wash these parts with warm, soapy water using the provided cleaning brush to thoroughly clean the filter basket and other components. The cleaning brush is particularly useful for removing pulp from the fine mesh of the filter.
5. Rinse all parts thoroughly and allow them to air dry completely before reassembling or storing.
6. Motor Base: Wipe the motor base with a damp cloth. Never immerse the motor base in water or place it under running water.
7. Store the assembled or disassembled juicer in a clean, dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Girmi products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or contact Girmi customer support directly. Keep your proof of purchase for any warranty claims.

For technical assistance, spare parts, or general inquiries, please visit the official Girmi website or contact their customer service department. Contact details can typically be found on the product packaging or the official brand website.