Brother PTD600
Brother P-touch PTD600 Label Maker User Manual
Model: PTD600
Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Brother P-touch PTD600 Label Maker. Please read this manual thoroughly before using the device to ensure proper and safe operation.
Setup
Unpacking and Initial Inspection
Carefully remove the label maker and all accessories from the packaging. Verify that all components are present and undamaged. Retain the packaging for future storage or transport.
- Brother P-touch PTD600 Label Maker
- AC Adapter
- USB Cable
- Sample TZe Tape Cassette
- User Manual (this document)
Powering the Device
The PTD600 can be powered using the included AC adapter or six AA alkaline batteries (not included).
Using the AC Adapter
Connect the AC adapter cable to the DC IN 9V port on the side of the label maker. Plug the AC adapter into a standard electrical outlet. The device will power on automatically or can be turned on using the power button.
Installing Batteries
Open the battery compartment cover on the bottom of the label maker. Insert six new AA alkaline batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
Loading a Tape Cassette
The PTD600 uses Brother TZe tape cassettes. Ensure the tape cassette is compatible with your model.
- Open the tape cassette cover located at the rear of the label maker.
- Insert the TZe tape cassette firmly into the compartment, ensuring the tape and ribbon are aligned with the guides.
- Close the tape cassette cover until it clicks into place.
Image: The Brother P-touch PTD600 Label Maker, showcasing its full QWERTY keyboard, color display, and top-loading tape design.
Operating Instructions
Basic Label Creation
- Turn on the label maker by pressing the Power button.
- The color display will show the "Create Label" screen.
- Use the QWERTY keyboard to type your desired text.
- Use the arrow keys to navigate and edit text.
- Press the Print button to print the label.
- After printing, manually cut the label using the cutter lever on the side of the device.
Image: A close-up view of the Brother P-touch PTD600's color display, highlighting the "Create Label" option, which is the primary interface for starting a new label.
Formatting Labels
The PTD600 offers various formatting options accessible via the function (Fn) key and menu options.
- Font Style: Press Fn + Font to change font styles.
- Size: Adjust text size using the Fn + Size option.
- Frames & Symbols: Add decorative frames and symbols to your labels.
- Barcodes: The PTD600 supports printing various barcode types. Select the barcode option from the menu and enter the data. For example, a UPC-A barcode for "Paul's Italian Pizza & Pasta" with the number 0012345678905 can be generated.
Image: The Brother P-touch PTD600 Label Maker shown alongside a sample label for "Paul's Italian Pizza & Pasta" which includes a barcode, demonstrating the device's capability to print detailed labels.
Image: The Brother P-touch PTD600 Label Maker with a variety of sample labels, illustrating its versatility in creating labels for different purposes, including inventory and product identification.
PC/Mac Connectivity
Connect the PTD600 to your computer using the supplied USB cable to access advanced label design features with Brother's P-touch Editor software.
- Download the latest P-touch Editor software and drivers from the official Brother support website.
- Install the software on your PC or Mac.
- Connect the label maker to your computer via USB.
- Launch P-touch Editor to design and print labels directly from your computer.
Maintenance
Cleaning the Print Head
If print quality deteriorates (e.g., faint lines, missing dots), the print head may need cleaning.
- Turn off the label maker and disconnect the AC adapter or remove batteries.
- Open the tape cassette cover.
- Use a dry cotton swab to gently wipe the print head. Do not touch the print head with your bare hands.
- Close the tape cassette cover and reconnect power.
Cleaning the Cutter Blade
Dust or adhesive residue can accumulate on the cutter blade, affecting its performance.
- Turn off the label maker and disconnect power.
- Locate the cutter blade assembly near the tape exit slot.
- Use a dry cotton swab to carefully clean around the blade. Be cautious as the blade is sharp.
Tape Storage
Store TZe tape cassettes in a cool, dry place away from direct sunlight and extreme temperatures to preserve their adhesive properties and print quality.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | No power, incorrect battery installation, or dead batteries. | Ensure AC adapter is properly connected or replace batteries with new ones, checking polarity. |
| Poor print quality (faint, lines, dots). | Dirty print head, incorrect tape, or low battery. | Clean the print head. Ensure you are using genuine Brother TZe tape. Replace batteries or use AC adapter. |
| Tape jam or "Tape Error" message. | Tape not inserted correctly, or foreign object in tape compartment. | Open tape cover, remove and reinsert tape cassette. Check for any obstructions. |
| Cutter does not work. | Cutter blade is dirty or damaged. | Clean the cutter blade. If damaged, contact Brother support. |
For further assistance, please refer to the official Brother support website or contact customer service.
Specifications
| Feature | Detail |
|---|---|
| Model Name | PTD600 |
| Brand | Brother |
| Connectivity Technology | USB |
| Printing Technology | Thermal Transfer |
| Special Features | Internal Memory, Color Display with Backlight |
| Color | Black, Grey |
| Printer Output | Color (for display), Monochrome (for print) |
| Maximum Print Speed (Monochrome) | 1 inch/second |
| Item Weight | 2.1 Pounds |
| Power Source | AC Adapter (included) or 6 AA Batteries (not included) |
| Compatible Tape Widths | 3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm TZe tapes |
Warranty and Support
Brother International Corporation provides a limited warranty for this product. Please refer to the warranty card included with your product or visit the official Brother support website for detailed warranty terms and conditions.
For technical support, driver downloads, FAQs, and other resources, please visit the Brother Support Website.
You can also contact Brother Customer Service directly for assistance with product issues or inquiries.
Related Documents - PTD600
 |
Brother PT-E110 Industrial Handheld Labeling Tool Datasheet Detailed specifications, features, kit contents, and accessories for the Brother PT-E110 industrial handheld labeling tool. Learn about its QWERTY keyboard, print capabilities, tape compatibility, and durability for professional labeling needs. |
 |
Brother VC-500W Color Label Printer User's Guide User's guide for the Brother VC-500W Color Label Printer, covering setup, operation, safety instructions, software installation, and troubleshooting. |
 |
Brother P-touch P750W Használati útmutató Részletes útmutató a Brother P-touch P750W címkenyomtató biztonságos és hatékony használatához, beleértve a telepítést, a kellékeket, a szoftvereket és a hibaelhárítást. |
 |
Brother VC-500W Color Label Printer User's Guide User's guide for the Brother VC-500W Color Label Printer, covering safety instructions, setup, operation, software download, Wi-Fi configuration, and maintenance. |
 |
Phomemo D35 Wireless Bluetooth Label Maker: User Guide and Features A comprehensive user guide for the Phomemo D35 wireless Bluetooth label maker. Learn how to set up, use the smartphone app, and print custom labels for home and office organization with this portable mini label printer. |
 |
Brother PT-D460BT Label Maker: User Guide and Safety Information Comprehensive guide for the Brother PT-D460BT Label Maker, covering safety precautions, basic operations, printing from various devices, troubleshooting, and contact information. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.