Lewmar Remote Control Unit for Chain Counter Sensor

Introduction

This manual provides detailed instructions for the Lewmar Remote Control Unit for Chain Counter Sensor, designed to offer convenient and reliable remote operation of your marine chain counter system. This unit, model 68000320, operates on 12V power and features Wi-Fi connectivity for seamless integration. It is constructed from durable stainless steel, ensuring longevity in marine environments.

Figure 1: Lewmar Remote Control Unit for Chain Counter Sensor. This image displays the compact, black remote control unit, highlighting its design and form factor.

Setup and Installation

Proper installation is crucial for the optimal performance and safety of your Lewmar Remote Control Unit. This unit is designed for panel mounting.

1. Mounting

• Select a suitable location on your vessel's control panel for the unit. Ensure the chosen area is protected from direct water exposure, despite the unit's material.
• The unit is designed for Panel Mount installation. Cut an appropriately sized opening in the panel according to the provided template (if applicable, refer to packaging for template).
• Secure the unit firmly into the panel using the supplied fasteners.

2. Electrical Connection

• The unit requires a 12 Volts DC power supply. Ensure the power source is stable and adequately fused.
• Connect the positive (+) and negative (-) terminals of the unit to the corresponding terminals of your 12V power supply. Observe correct polarity.
• Ensure all electrical connections are secure and protected from moisture.

3. System Integration

• Connect the remote control unit to your existing chain counter sensor system. Refer to your chain counter's manual for specific wiring diagrams and compatibility.
• The unit utilizes Wi-Fi for connectivity. Follow the instructions in your chain counter system's manual or the unit's specific Wi-Fi setup guide to pair the devices.

Operating Instructions

The Lewmar Remote Control Unit provides intuitive control over your chain counter.

Basic Operation

• The unit features an ON-OFF-ON operation mode, typically indicating a three-position control for functions such as 'Up', 'Stop', and 'Down' for a windlass or similar equipment.
• Familiarize yourself with the specific button or 'Ring' controller layout and its corresponding functions as indicated on the unit or in your chain counter system's manual.
• Ensure the unit is powered on and successfully connected via Wi-Fi to your chain counter system before attempting operation.

Maintenance

Regular maintenance will ensure the longevity and reliable performance of your remote control unit.

• Cleaning: The unit is made of Stainless Steel. Clean the exterior regularly with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or internal components.
• Inspection: Periodically check all electrical connections for corrosion or looseness. Ensure the unit is securely mounted.
• Environmental Protection: Note that the unit has an International protection rating: IP00. This rating indicates no protection against solid objects or water ingress. It is critical to install this unit in a location that provides adequate protection from dust, splashes, and direct water exposure, or within an appropriate enclosure.

Troubleshooting

If you encounter issues with your Lewmar Remote Control Unit, refer to the following common problems and solutions:

Specifications

Key technical specifications for the Lewmar Remote Control Unit (Model: 68000320):

Warranty and Support

For warranty information, technical support, or service inquiries regarding your Lewmar Remote Control Unit, please refer to the official Lewmar website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, visit the official Lewmar website: www.lewmar.com