1. Introduction
The Fire Sense 61709 Adjustable Table is designed to enhance the functionality and convenience of your outdoor patio heater. This accessory provides a sturdy surface for drinks and other small items, allowing you to maximize your outdoor living space. Constructed from durable stainless steel, it is built to withstand outdoor conditions and integrate seamlessly with compatible patio heaters.
2. Important Safety Information
Please read and understand all safety instructions before installing or using this product. Failure to follow these instructions may result in property damage, personal injury, or death.
- Always maintain proper clearance from combustible materials when the patio heater is in operation.
- Ensure adequate ventilation around the patio heater and table.
- Install the table at least 30 inches below the head unit of the patio heater.
- This table is designed to fit patio heaters with a 2 1/2-inch diameter pole. Verify your heater's pole diameter before installation.
- Do not overload the table. Ensure items placed on it are stable and do not obstruct the heater's operation or ventilation.
3. Package Contents
Verify that all components are present before beginning assembly:
- 1 x 16-inch Diameter Stainless Steel Tabletop
- 1 x Tightening Coupler Assembly (consisting of multiple parts for securing to the pole)
4. Assembly Instructions
The adjustable table is designed for straightforward installation. Please follow these steps carefully:
- Prepare the Patio Heater: Depending on your patio heater model, you may need to partially disassemble the heater's pole to slide the table onto it. Refer to your patio heater's manual for specific disassembly instructions.
- Verify Pole Diameter: This table is designed for patio heater poles with a 2 1/2-inch (approximately 2 7/16-inch) diameter. Carefully measure your heater's pole to ensure compatibility. If the coupler does not fit, contact customer service for assistance.
- Slide the Table On: Carefully slide the 16-inch diameter stainless steel tabletop onto the patio heater pole. Position it at your desired height, ensuring it is at least 30 inches below the heater's burner head.
- Install the Tightening Coupler: Assemble the tightening coupler components around the pole directly beneath the table. Hand-tighten the coupler to secure the table in place. Ensure the table is level and stable.
- Reassemble Heater (if necessary): If you disassembled parts of your patio heater, reassemble them according to your heater's instruction manual.
5. Operating Instructions
Once installed, the adjustable table requires minimal operation. Its primary function is to provide a stable surface.
- Adjusting Height: To adjust the table's height, loosen the tightening coupler, slide the table to the desired position, and then firmly re-tighten the coupler. Always ensure the table is securely fastened before placing items on it.
- Placement of Items: Place drinks, snacks, or other small items on the table. Avoid placing heavy objects or items that could easily tip over.
6. Maintenance
To ensure the longevity and appearance of your adjustable table, follow these simple maintenance guidelines:
- Cleaning: Wipe the stainless steel surface with a soft, damp cloth. For stubborn stains, use a mild stainless steel cleaner. Avoid abrasive cleaners or scouring pads, which can scratch the finish.
- Inspection: Periodically check the tightening coupler to ensure it remains securely fastened. Re-tighten if any looseness is detected.
- Storage: If storing the patio heater for an extended period, you may choose to remove the table for separate storage to prevent potential damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table does not fit the heater pole. | Heater pole diameter is not 2 1/2 inches. | Verify your heater's pole diameter. This table is designed for 2 1/2-inch poles. Contact customer service if you are unsure or if the part does not fit. |
| Table is wobbly or unstable. | Tightening coupler is not fully secured. | Ensure the tightening coupler is firmly tightened against the heater pole. |
8. Specifications
- Material: Stainless Steel
- Product Dimensions: 16" Diameter, 1" H
- Item Weight: 2 lbs
- Compatible Pole Diameter: 2 1/2 inches (approx. 2 7/16 inches)
- Color: Silver
9. Warranty and Support
Fire Sense products are designed for quality and durability. For specific warranty details regarding your adjustable table, please refer to the warranty information provided with your original patio heater purchase or contact Fire Sense customer support.
For further assistance, please visit the official Fire Sense website or contact their customer service department.
