Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your TAROT 650 Carbon Fiber 4-Axis Folding FPV Drone Frame Kit. Please read thoroughly before use to ensure safe and correct operation.
Setup and Assembly
1. Unboxing and Component Identification
Before beginning assembly, ensure all components are present and undamaged. Refer to the parts diagram for identification.
2. Motor Installation
The frame supports 4 motors. Ensure correct motor type (CW/CCW) is installed on the corresponding arm. Use M3*8 screws for installation, avoiding screws from the motor box if they are too short.
3. Frame Assembly (Arms and Center Plates)
The frame features a fully folding design for portability. Assemble the carbon fiber arms to the center plates using the provided hardware. Ensure all connections are secure but do not overtighten initially.
4. Wiring and Electronics Installation
Carefully route all wiring for motors, ESCs, and flight controller. Ensure no wires are pinched or interfere with moving parts. Secure components to the frame using appropriate mounting hardware.
Operating Instructions
1. Pre-Flight Checklist
- Ensure all screws are tightened.
- Check propeller orientation and security.
- Verify battery is fully charged and securely mounted.
- Confirm flight controller is properly calibrated.
2. Basic Flight Controls
Familiarize yourself with the remote control functions.
- Throttle: Controls vertical ascent/descent.
- Roll: Controls lateral movement (left/right).
- Pitch: Controls forward/backward movement.
- Yaw: Controls rotation around the vertical axis.
3. Take-off and Landing
Perform take-off and landing in an open, safe area.
Maintenance
1. Regular Checks
- Inspect propellers for cracks or damage before each flight.
- Check all wiring connections for looseness or wear.
- Ensure motors spin freely and are free of debris.
2. Cleaning
Clean the frame and components with a soft, dry cloth. Avoid using harsh chemicals.
Troubleshooting
1. Common Issues
- Drone not powering on: Check battery connection and charge level.
- Unstable flight: Verify propeller installation, motor direction, and flight controller calibration.
- Loss of control: Check remote control battery, signal strength, and receiver connection.
Specifications
| Feature | Detail |
|---|---|
| Brand | TAROT |
| Model Name | TL65B01 |
| Special Feature | full-folding design |
| Age Range (Description) | Adult |
| Color | Matte and Gold Connector |
| Video Capture Resolution | 3k |
| Connectivity Technology | Bluetooth |
| Included Components | Battery, Propeller |
| Skill Level | Beginner |
| Item Weight | 476 Grams |
| Video Capture Format | 3k |
| Remote Control Technology | Bluetooth |
| Control Type | Remote Control |
| Material | Carbon Fiber |
| Wireless Communication Technology | Bluetooth |
| Battery Cell Composition | Lithium Polymer |
| Are Batteries Included | No |
| Supported Image Format | JPEG |
| Video Output Resolution | 3000 pixels |
| Remote Control Included? | Yes |
| Optical Sensor Technology | CMOS |
| Rechargeable Battery Included | No |
| Manufacturer | Tarot |
| Item Weight | 1.05 pounds |
| Package Dimensions | 14.25 x 9.25 x 2.44 inches |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | M05548 |
Warranty and Support
1. Warranty Information
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
2. Customer Support
For further assistance, technical support, or inquiries regarding your TAROT 650 drone frame kit, please contact TAROT customer service through their official channels.
