1. Introduction
Thank you for choosing RECON Premium 5-Piece Cab Lights. This manual provides essential information for the proper installation, operation, and maintenance of your new cab lights. These lights are designed to enhance visibility and style for your Ford Super Duty truck.
Image 1.1: RECON Premium 5-Piece Cab Lights with Smoked Lens and Ultra Bright White Bar Style OLED Lights.
The RECON cab roof light kits are direct replacements for factory-installed cab lights or can be installed on trucks that did not originally come with them. This specific kit features a smoked lens with ultra-bright white bar style OLED lights, offering superior visibility and a modern aesthetic.
Key Features:
- Superior Visibility: Nearly 300% brighter than traditional halogen bulbs for improved safety in adverse weather and at night.
- Complete Kit: Includes all necessary wiring and hardware for installation.
- Rugged Durability: Constructed from military-grade reinforced ABS plastic with an IP67 waterproof rating and UV-treated lenses.
- Energy Efficient: LED bulbs consume less power and have a lifespan exceeding 50,000 hours.
2. Compatibility
This RECON cab light kit (Model: 264143WHBKHP) is specifically designed for the following vehicles:
- Ford Super Duty: F250, F350, F450, F550
- Model Years: 1999-2016
IMPORTANT NOTE: This kit is intended for trucks that DID NOT COME with factory/OEM installed cab roof lights. It is designed for a fresh installation.
Image 2.1: Compatibility details for RECON Cab Lights.
3. Setup and Installation
The RECON cab light kit includes all necessary wiring and hardware for a straightforward installation. While designed for ease of use, professional installation is recommended if you are not familiar with automotive electrical systems or drilling into your vehicle's roof.
General Installation Steps (Summary):
- Preparation: Ensure your vehicle is off and the battery is disconnected. Gather all tools required (drills, wire strippers, screwdrivers, etc.).
- Placement: Carefully measure and mark the desired locations for each of the five cab lights on your truck's roof. Ensure even spacing and proper alignment.
- Drilling: Drill pilot holes and then appropriate-sized holes for the light bases and wiring. Take extreme care to avoid damaging interior components.
- Wiring: Route the included wiring harness through the drilled holes and connect the lights. Follow the wiring diagram provided in the full installation guide (not included in this summary) to ensure correct polarity and connection to your vehicle's power source (e.g., parking lights circuit).
- Mounting: Securely mount each cab light using the provided hardware. Ensure a watertight seal to prevent leaks.
- Testing: Reconnect the battery and test the lights to ensure they function correctly before finalizing all connections and tidying up wiring.
For detailed, step-by-step instructions and wiring diagrams, please refer to the comprehensive installation guide included with your product packaging or available on the RECON website.
Image 3.1: Installed RECON Cab Lights on a Ford Super Duty truck.
4. Operating Instructions
RECON cab lights are designed for simple operation, typically activating with your vehicle's parking lights or headlights. Once properly installed, they will illuminate automatically when the corresponding vehicle lights are turned on.
Functionality:
- Automatic Activation: The lights are wired to turn on and off with your truck's existing lighting system.
- Enhanced Visibility: The ultra-bright white OLEDs provide significant illumination, making your vehicle more noticeable to other drivers, especially in low-light conditions, fog, rain, or snow.
- Low Power Consumption: LED technology ensures minimal drain on your vehicle's electrical system.
5. Maintenance
RECON cab lights are built for durability and require minimal maintenance. Their robust design ensures long-lasting performance under various environmental conditions.
Care and Longevity:
- Cleaning: Clean the lenses periodically with a soft cloth and mild soap and water to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens surface.
- Durability Features:
- IP67 Waterproof Rating: Protects against dust, dirt, water, and snow ingress.
- UV-Treated Lens: Guards against fading and yellowing from prolonged exposure to direct sunlight.
- Impact Resistant: Military-grade reinforced ABS plastic housing provides protection against physical impacts.
- Long Lifespan: With over 50,000 hours of operation, the LED bulbs are designed to last significantly longer than traditional bulbs, reducing the need for frequent replacements.
Image 5.1: RECON Cab Lights featuring IP67 Waterproof design.
Image 5.2: RECON Cab Lights built for ultimate durability.
6. Troubleshooting
If you encounter issues with your RECON cab lights, please refer to the following common troubleshooting steps:
- Lights Not Illuminating:
- Check all electrical connections to ensure they are secure and properly insulated.
- Verify that the power source (e.g., parking light circuit) is receiving power.
- Inspect fuses related to the lighting circuit in your vehicle's fuse box.
- Ensure correct polarity of the wiring.
- Flickering Lights:
- Check for loose connections or damaged wiring.
- Ensure adequate voltage supply to the lights.
- Water Inside Lens:
- Inspect the seal around the light housing and the mounting area. Re-seal if necessary using appropriate automotive sealant.
- Ensure all mounting screws are tightened properly.
If these steps do not resolve the issue, please contact RECON customer support for further assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | RECON |
| Model Number | 264143WHBKHP |
| Color | White LED |
| Lens Color | Smoked Lens |
| Lens Material | ABS, Plastic |
| Item Dimensions (L x W x H) | 19 x 7 x 3 inches |
| Item Weight | 1.8 pounds |
| Special Features | Waterproof, Dustproof, Impact Resistant, Shockproof |
| Vehicle Service Type | Truck |
| UPC | 810614015938 |
8. Warranty and Support
RECON stands behind the quality of its products. Your RECON cab lights come with best-in-class coverage, ensuring peace of mind.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact RECON's USA-based customer support team. Support is available 7 days a week to assist you.
Please refer to your product packaging or the official RECON website for the most current contact information and detailed warranty terms and conditions.
