Goldmedal 205100

Goldmedal 360 Degree Power Strip Instruction Manual

Model: 205100

Introduction

The Goldmedal 360 Degree Power Strip provides a centralized power solution for multiple electronic devices. It features 6 universal sockets designed for compatibility with various plug types worldwide. The unit includes a master switch with an LED indicator for power control and status. Constructed with high-grade fire-retardant plastic, it incorporates a heavy-duty power cord with a reset switch and overload protection, offering enhanced safety for connected appliances.

Goldmedal 360 Degree Power Strip, top-down view

Image: Goldmedal 360 Degree Power Strip, showcasing its compact, round design with six universal sockets.

Safety Information

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

  • Do not exceed the maximum load capacity of 6 Amps (240 Volts).
  • Do not use in wet or damp conditions. Keep away from water and other liquids.
  • This product is for indoor use only.
  • Keep out of reach of children and pets.
  • Do not disassemble, modify, or attempt to repair the unit. Contact qualified personnel for service.
  • Ensure the power strip is plugged into a properly grounded wall outlet.
  • Unplug the power strip from the wall outlet when not in use or before cleaning.
  • Avoid running the power cord under carpets or in areas where it can be damaged.

Product Overview

The Goldmedal 360 Degree Power Strip is equipped with several features designed for convenience and safety:

  • 6 Universal Sockets: Compatible with various plug types worldwide.
  • Master Switch with LED Indicator: For easy power control and status indication.
  • 2-Meter Cable: Provides flexible placement options.
  • Overload Protector: Automatically cuts power to prevent damage from excessive current.
  • Fire-Retardant Plastic: Enhances safety by reducing fire risk.
  • Compact and Durable Design: Sturdy build for long-lasting use.
Goldmedal 360 Degree Power Strip with features labeled

Image: Detailed view of the power strip highlighting its LED Light Indicator, Overload Protector, 2 Meter Cable Length, Fire-Retardant High Grade Plastic, and compatibility with worldwide plugs.

Setup

Follow these steps to set up your Goldmedal 360 Degree Power Strip:

  1. Unpack: Carefully remove the power strip from its packaging and inspect it for any signs of damage.
  2. Placement: Choose a dry, stable, and flat surface for the power strip. Ensure it is away from direct sunlight, heat sources, and any liquids. The 2-meter cable provides flexibility for placement.
  3. Wall Mounting (Optional): If desired, the power strip can be wall-mounted using appropriate screws (not included) through the designated mounting holes on the back of the unit. Ensure the mounting surface is secure and can support the weight of the power strip and connected devices.
  4. Connect to Power: Plug the power strip's main plug securely into a grounded 240V AC wall outlet.

Operating Instructions

Using your Goldmedal 360 Degree Power Strip is straightforward:

  1. Ensure Master Switch is OFF: Before connecting any devices, ensure the master switch on the power strip is in the 'OFF' position.
  2. Connect Devices: Plug your electronic appliances into the universal sockets. The 360-degree arrangement allows for easy access and accommodates various plug sizes without blocking adjacent outlets.
  3. Power ON: Flip the master switch to the 'ON' position. The integrated LED indicator will illuminate, signifying that power is now supplied to all connected sockets.
  4. Power OFF: To disconnect power to all devices, simply flip the master switch to the 'OFF' position. The LED indicator will turn off. It is recommended to turn off the power strip when not in use.
Goldmedal 360 Degree Power Strip in use with multiple devices

Image: The power strip connected to various devices such as laptops, mobile chargers, and monitors, demonstrating its multi-device capability.

Maintenance

Proper maintenance ensures the longevity and safe operation of your power strip:

  • Cleaning: Always unplug the power strip from the wall outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the unit or pose an electrical hazard.
  • Inspection: Periodically inspect the power cord and the unit for any signs of damage, such as cuts, frayed wires, or cracks in the casing. If any damage is found, discontinue use immediately and contact customer support.
  • Dust Removal: Ensure that the sockets are free from dust and debris, which can accumulate over time and affect performance or safety.

Troubleshooting

If you encounter issues with your Goldmedal 360 Degree Power Strip, refer to the following common problems and solutions:

  • No Power to Devices:
    • Ensure the power strip's main plug is fully inserted into a functional wall outlet.
    • Verify that the master switch is in the 'ON' position and the LED indicator is illuminated.
    • Check if the wall outlet itself is working by plugging in another device directly.
    • The overload protector may have tripped. See the next point for resolution.
  • Overload Protector Tripped:
    • If the power strip suddenly loses power and the LED indicator is off, the overload protector has likely activated to prevent damage from excessive current.
    • Unplug some of the connected devices to reduce the total power load.
    • Wait a few moments, then press the reset button (if visible) or cycle the master switch to 'OFF' and then 'ON' again to restore power.
  • Loose Connections:
    • Ensure all device plugs are firmly seated in the power strip's sockets.

Specifications

FeatureDetail
BrandGoldmedal
Model Number205100
Total Power Outlets6 Universal Sockets
Voltage240 Volts
Maximum Current6 Amps
Cable Length2 Meters
Plug TypeType D
Special FeaturesLED Indicator, Overload Protection
Enclosure MaterialFire-Retardant Plastic
Item Dimensions (L x W)17L x 17W Centimeters (Approximate Diameter)
Item Weight700 Grams
Compatible DevicesAll plugs
Goldmedal 360 Degree Power Strip with dimensions

Image: The power strip with indicated dimensions: approximately 170mm diameter and 37mm height.

Warranty

This Goldmedal 360 Degree Power Strip comes with a 1-year warranty provided by the manufacturer from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims.

Support

For any product-related queries, technical assistance, or complaints, please contact Goldmedal Electricals Pvt Ltd using the information below:

  • Manufacturer: Goldmedal Electricals Pvt Ltd
  • Address: A/303, Kemp Plaza, Off Link Road, Mindspace, Malad (W), Mumbai - 400064, Maharashtra, India
  • Phone: +91 9711 09 09 09
  • Email: info@goldmedalindia.com
  • Website: www.goldmedalindia.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.