Bromic Tungsten Smart Heat Portable Gas Patio Heater

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Bromic Tungsten Smart Heat Portable Gas Patio Heater, Model BH0510001. This 11000W infrared heater is designed for outdoor use only, providing targeted warmth for patios and outdoor living areas.

Important Safety Information

• Outdoor Use Only: This appliance is designed exclusively for outdoor use. Do not operate indoors or in enclosed spaces.
• Local Regulations: Always check and comply with local laws and regulations regarding the installation and use of gas patio heaters before operating this product.
• Clearances: Maintain minimum clearances from combustible materials as specified in the assembly instructions.
• Ventilation: Ensure adequate ventilation when operating the heater.
• Fuel Type: Use only Propane Gas (LPG) as specified for this model.
• Stability: Ensure the heater is placed on a stable, level surface to prevent tipping. The unit includes an anti-tilt safety device.
• Children and Pets: Keep children and pets away from the heater during operation and while it is cooling down.
• Flammable Materials: Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

Product Features

• High-Powered Heating: Delivers 11000W of gas infrared heat, efficiently warming up to 215 Sq Ft.
• Tinted Ceramic Glass Fascia: Provides even heat distribution and reduces light emission for an attractive ambiance.
• Adjustable Installation: Designed for free-standing use with adjustable directional heat distribution.
• Smart & Energy Efficient: Compatible with smart control systems (not included) for remote operation and adjustable heat output. Infrared technology minimizes wasted energy.
• Durable Construction: Made from high-performing stainless steel for longevity and reliability in various weather conditions.
• Portability: Features integrated wheels for effortless movement across outdoor surfaces.
• Safety Features: Includes an anti-tilt safety device and flame failure shut-off.

Setup and Assembly

The Bromic Tungsten Smart Heat Portable Heater requires minimal assembly. All necessary components and tools are included in the packaging. The process typically takes 15-20 minutes.

1. Unpack all components and verify against the parts list in your detailed instruction manual.
2. Attach the base to the main body of the heater.
3. Secure the heating mechanism to the top frame.
4. Connect the propane gas line to the propane tank and secure the tank within the designated compartment.
5. Ensure all connections are tight and secure before operation.

Figure 1: Front view of the assembled Bromic Tungsten Smart Heat Portable Heater.

Figure 2: Side view of the assembled Bromic Tungsten Smart Heat Portable Heater, showcasing its curved design.

Figure 3: Diagram illustrating the dimensions of the Bromic Tungsten Smart Heat Portable Heater (27.6"D x 27.6"W x 85.2"H).

Operating Instructions

Follow these steps to safely operate your patio heater:

1. Fuel Connection: Ensure the propane tank is securely connected and the gas valve is open.
2. Ignition: Locate the control knob and igniter button. Turn the control knob to the "Pilot" position, then press and hold the igniter button until the pilot flame is lit. Continue holding for 10-15 seconds to allow the thermocouple to heat up.
3. Main Burner: Once the pilot is stable, release the igniter button and turn the control knob to the desired heat setting (Low to High).
4. Adjusting Heat: Rotate the control knob to increase or decrease the heat output.
5. Shutting Down: To turn off the heater, turn the control knob to the "Off" position. Close the valve on the propane tank when the heater is not in use.

Figure 4: Close-up of the control panel, showing the ignition button and heat adjustment knob.

Maintenance

Regular maintenance ensures optimal performance and longevity of your heater.

• Cleaning: Periodically clean the exterior surfaces with a soft, damp cloth. Avoid abrasive cleaners.
• Burner Inspection: Inspect the burner and heating elements for any obstructions or damage before each use.
• Gas Line Check: Regularly check the gas hose and connections for leaks using a soapy water solution. Bubbles indicate a leak.
• Storage: When not in use for extended periods, disconnect the propane tank and store the heater in a dry, protected area. Consider using a weather-resistant cover.

Troubleshooting

Specifications

• Brand: Bromic Heating
• Model Number: BH0510001
• Fuel Type: Propane (LPG)
• Heating Power: 11000W (38,500 BTU/Hour)
• Heating Coverage: Up to 215 sq. ft.
• Voltage: 110 Volts
• Color: Black
• Material: Stainless Steel
• Product Dimensions: 27.6"D x 27.6"W x 85.2"H
• Item Weight: 22 pounds
• Form Factor: Free-standing
• Mounting Type: Floor Mount
• Special Feature: Portable, Radiant Burner
• Batteries: 1 AAA battery required (included for igniter)
• UPC: 012505227691, 023509011599, 728422229532

Warranty and Support

For warranty information or customer support, please refer to the documentation included with your product or contact Bromic Heating directly. General customer support is available through your retailer.