1. Product Overview
This manual provides essential information for the Delfield 19-inch Drawer Front with Wiper, model 000-328-003E-S. This genuine OEM replacement part is designed to ensure compatibility and reliable performance for Delfield commercial foodservice equipment.
Key Features:
- Guaranteed Compatibility: OEM parts fit and function exactly like the original components, ensuring a perfect match.
- Higher Quality and Reliability: OEM parts are built to the same quality standards as the original components, reducing the risk of premature failure.
- Safety Assurance: Genuine parts provide peace of mind that your equipment remains safe to use.
- Maintain Your Warranty: Using genuine OEM parts is less likely to void your equipment's warranty.
2. Included Components
The Delfield 19-inch Drawer Front (Model 000-328-003E-S) package typically includes:
- One (1) Delfield 19-inch Drawer Front with Wiper
- Necessary mounting hardware (e.g., screws, washers) - Note: Specific hardware may vary. Refer to your equipment's primary manual for detailed assembly instructions.
Figure 2.1: Top-down view of the Delfield 19-inch Drawer Front, showing the main panel and included hardware.
3. Installation and Setup
This section provides general guidance for installing the Delfield 19-inch Drawer Front. For detailed, equipment-specific installation instructions, always refer to the original equipment manufacturer's (OEM) service manual for your specific Delfield unit.
Safety Precautions:
- Always disconnect power to the equipment before beginning any installation or maintenance.
- Wear appropriate personal protective equipment (PPE), such as gloves and safety glasses.
- Ensure the work area is clean, well-lit, and free of obstructions.
- If unsure about any step, consult a qualified service technician.
General Installation Steps:
- Prepare the Unit: Ensure the existing drawer is empty and clean. If replacing an old drawer front, carefully remove it, noting how it was attached.
- Align the New Drawer Front: Position the new Delfield 19-inch Drawer Front (000-328-003E-S) onto the drawer assembly. Ensure proper alignment with the drawer slides and the main unit frame.
- Secure the Drawer Front: Use the provided or existing mounting hardware to securely attach the drawer front to the drawer assembly. Tighten all fasteners firmly but do not overtighten.
- Test Operation: Gently slide the drawer in and out several times to ensure smooth operation and proper sealing. Check that the wiper functions correctly.
Figure 3.1: Angled view of the drawer front, highlighting potential mounting points and the wiper mechanism.
4. Operation
The Delfield 19-inch Drawer Front (000-328-003E-S) functions as the primary closure and sealing component for compatible Delfield refrigeration or holding drawers. Its integrated wiper helps maintain temperature and hygiene within the unit.
- Opening/Closing: Grasp the drawer front firmly and pull to open, or push to close. Ensure it closes completely to maintain the internal temperature and seal.
- Wiper Function: The integrated wiper is designed to create a seal as the drawer closes, minimizing air leakage and maintaining efficiency.
5. Maintenance
Regular maintenance of the drawer front ensures its longevity and the efficient operation of your Delfield equipment.
Cleaning:
- Clean the drawer front regularly with a mild, non-abrasive cleaner and a soft cloth.
- Pay attention to the wiper area, ensuring it is free of food debris or buildup that could impede its sealing function.
- Rinse with clean water and dry thoroughly to prevent water spots or corrosion.
Inspection:
- Periodically inspect the drawer front for any signs of damage, such as dents, cracks, or loose fasteners.
- Check the condition of the wiper. If it appears worn, cracked, or no longer provides an effective seal, it may need replacement.
- Ensure the drawer slides smoothly without binding or excessive play.
Figure 5.1: Close-up view of the integrated wiper and mounting hardware, critical for proper sealing and function.
6. Troubleshooting
This section addresses common issues that may arise with the drawer front. For complex problems, consult a qualified service technician.
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawer not closing completely or sealing properly. | Debris on wiper or sealing surface; damaged wiper; misaligned drawer front. | Clean wiper and sealing area. Inspect wiper for damage and replace if necessary. Check drawer front alignment and adjust if loose. |
| Drawer is difficult to open or close. | Damaged or dirty drawer slides; misaligned drawer front; obstruction. | Clean and lubricate drawer slides. Check for obstructions. Re-align drawer front if necessary. |
| Loose or wobbly drawer front. | Loose mounting hardware. | Tighten all mounting screws. Do not overtighten. |
Figure 6.1: Overall perspective view of the Delfield 19-inch Drawer Front, useful for general identification.
7. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | Delfield |
| Part Number | 000-328-003E-S |
| Item Model Number | 000-328-003E-S |
| Product Dimensions | 24 x 18 x 7 inches |
| Item Weight | 4.3 pounds |
| Item Package Quantity | 1 |
| Included Components | Replacement Part |
| Batteries Required? | No |
| ASIN | B00NBALVKO |
| Date First Available | September 4, 2014 |
8. Warranty and Support
As a genuine OEM replacement part, the Delfield 19-inch Drawer Front (000-328-003E-S) is designed to maintain the integrity of your equipment's original warranty. Using genuine OEM parts is crucial for ensuring continued warranty coverage and optimal performance.
For specific warranty details, technical support, or service inquiries related to your Delfield equipment, please refer to the documentation provided with your original Delfield unit or contact Delfield customer service directly. Contact information can typically be found on the manufacturer's official website or within your equipment's main user manual.
Note: This manual pertains specifically to the replacement drawer front. Any warranty claims or support requests for the complete Delfield unit should be directed to Delfield's official support channels.
