Product Overview
The Design Toscano KY1314 Life Size Blessed Virgin Mary Statue is a religious garden ornament crafted from quality designer resin, reinforced with fiberglass, and finished with an antique stone appearance. This statue is a reproduction inspired by a damaged Italian church antique, depicting the Blessed Mother of the Immaculate Conception.
- Dimensions: 21.5 inches (W) x 20 inches (D) x 69.5 inches (H)
- Weight: 69 lbs
- Material: Designer Resin with Fiberglass reinforcement
- Finish: Antique Stone
- Mounting: Freestanding
- Recommended Use: Garden, Home
Figure 1: Front view of the Design Toscano Blessed Virgin Mary Statue.
Setup and Placement
This statue is designed for freestanding placement in both indoor and outdoor environments. Due to its size and weight, proper handling and site preparation are essential for stability and longevity.
- Unpacking: Carefully remove the statue from its packaging. Retain all packaging materials until you have inspected the statue for any damage.
- Site Selection:
- For outdoor placement, choose a level, stable surface that can support the statue's weight (69 lbs) and resist environmental factors such as wind. Consider areas with good drainage to prevent water accumulation around the base.
- For indoor placement, ensure the chosen location has a stable floor and sufficient space to accommodate the statue's dimensions.
- Positioning: Due to its height (69.5 inches) and weight, it is recommended that at least two adults assist in carefully moving and positioning the statue to its desired location. Lift from the base to avoid stressing delicate features.
- Stability Check: Once positioned, gently test the statue's stability to ensure it is firmly seated and does not wobble. If necessary, adjust the base or the ground beneath it to achieve optimal stability.
Figure 2: Statue positioned in a garden environment.
Figure 3: Dimensions and scale of the statue.
Operating Instructions
The Design Toscano Blessed Virgin Mary Statue is a decorative item and does not require any operational procedures. It is designed for static display.
- Ensure the statue is placed in a location where it will not be easily knocked over.
- Avoid placing the statue in areas of high foot traffic or where it could be exposed to impacts.
Maintenance and Care
To preserve the antique stone finish and structural integrity of your statue, follow these maintenance guidelines:
- Cleaning: Wipe clean with a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or stiff brushes, as these can damage the finish.
- Outdoor Exposure: While designed for outdoor use, prolonged exposure to extreme weather conditions (e.g., freezing temperatures, heavy snow, intense direct sunlight) may affect the finish over time. Consider covering the statue or moving it indoors during severe weather.
- Inspection: Periodically inspect the statue for any signs of wear, cracks, or damage, especially after severe weather events.
Figure 4: Detail of the statue's hands, showing the antique stone finish. Regular cleaning helps maintain this detail.
Troubleshooting
This section addresses common concerns regarding your statue.
| Problem | Possible Cause | Solution |
|---|---|---|
| Statue appears unstable or wobbly. | Uneven ground or surface. | Relocate the statue to a level surface. If outdoors, compact the ground or use a stable base. |
| Discoloration or fading of the finish. | Prolonged exposure to harsh sunlight or environmental elements. | Consider placing the statue in a shaded area or applying a UV-protective sealant suitable for resin statues (consult a specialist if unsure). |
| Accumulation of dirt or grime. | Lack of regular cleaning. | Wipe clean with a soft, damp cloth as per maintenance instructions. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | KY1314 |
| Brand | Design Toscano |
| Dimensions (W x D x H) | 21.5" x 20" x 69.5" |
| Weight | 69 lbs |
| Material | Quality Designer Resin, Fiberglass Reinforced |
| Finish | Antique Stone |
| Mounting Type | Freestanding |
| Recommended Uses | Garden, Home |
| GTIN/UPC | 846092096923 |
Warranty and Support
For any inquiries or support regarding your Design Toscano KY1314 statue, please refer to the following information:
Return Policy
If you are not satisfied with your purchase, it must be returned within 60 days to receive a refund or exchange. Please note that you are responsible for the safe return of merchandise and for all shipping costs. Shipping charges are non-refundable once your order has been shipped. Customized orders and personalized items are non-refundable.
Contact Information
For further assistance, please visit the official Design Toscano website or contact their customer service department.
