Introduction
Thank you for purchasing the Pioneer CLD-C3 LaserDisc and CD Player. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
Safety Information
To ensure safe operation and prevent damage, observe the following precautions:
- Do not expose the unit to rain or moisture.
- Do not open the casing. Refer all servicing to qualified personnel.
- Ensure proper ventilation to prevent overheating.
- Use only the specified power supply (AC100V, 50/60Hz).
- Avoid placing the unit on unstable surfaces.
- Keep discs clean and free from scratches.
Package Contents
Verify that all items are present in the package:
- Pioneer CLD-C3 LD Player Unit
- Remote Control (if applicable, not specified in data)
- Power Cord
- Audio/Video Cables (if applicable, not specified in data)
- Instruction Manual (this document)
Product Overview
The Pioneer CLD-C3 is a versatile player designed for both LaserDisc (LD) and Compact Disc (CD) formats. It features double-sided playback and multiple output options for integration into your home entertainment system.
Figure 1: Front view of the Pioneer CLD-C3 LD Player, showing the disc tray, control buttons, and display panel.
Key features include:
- Double-sided playback: Allows for continuous viewing of LaserDiscs without manually flipping the disc.
- LD/CD compatibility: Plays both LaserDisc and Compact Disc formats. Note: This unit is not compatible with DVD playback.
- Continuous playback: Enables uninterrupted playback sequences.
- Multiple AV outputs: Equipped with 2 AV outputs, 1 S-terminal output, and 1 optical digital output for flexible system integration.
Setup
1. Unpacking and Placement
- Carefully remove the CLD-C3 unit from its packaging.
- Place the unit on a stable, level surface with adequate ventilation. Avoid direct sunlight, heat sources, or areas with high humidity.
2. Connecting to Your Audio/Video System
The CLD-C3 offers various output options:
- Video Output (Pin Jack): Connect the video output (yellow RCA jack) to the video input of your TV or receiver using an RCA video cable. The unit has 2 such outputs.
- S-Video Output (S-Terminal): For higher quality video, connect the S-Video output to an S-Video input on your TV or receiver using an S-Video cable. The unit has 1 S-terminal output.
- Analog Audio Output (RCA): Connect the analog audio outputs (red and white RCA jacks) to the audio inputs of your amplifier or receiver using RCA audio cables. The unit has 2 such outputs.
- Digital Audio Output (Optical): For digital audio, connect the optical digital output to a digital audio input on your receiver or DAC using an optical cable. The unit has 1 optical digital output.
3. Power Connection
After all audio/video connections are made, connect the power cord to the AC IN terminal on the rear of the unit, then plug it into a standard AC100V, 50/60Hz wall outlet.
Operating Instructions
1. Loading a Disc
- Press the OPEN/CLOSE button on the front panel or remote control to open the disc tray.
- Place the LaserDisc or CD gently onto the disc tray with the label side facing up.
- Press the OPEN/CLOSE button again to close the disc tray. The unit will begin reading the disc.
2. Basic Playback
- Ensure your TV/monitor and audio system are turned on and set to the correct input source.
- After loading a disc, press the PLAY button on the front panel or remote control to start playback.
- Use the STOP, PAUSE, FAST FORWARD, and REWIND buttons for playback control.
3. Double-Sided Playback (for LaserDiscs)
The CLD-C3 supports automatic double-sided playback for compatible LaserDiscs. When the first side of a disc finishes, the player will automatically reverse and begin playing the second side without requiring manual intervention.
4. Continuous Playback
For certain discs or programmed sequences, the continuous playback feature allows for uninterrupted playback. Refer to your remote control or front panel for specific continuous playback mode activation, if available.
Maintenance
1. Cleaning the Unit
- Wipe the exterior of the unit with a soft, dry cloth.
- Do not use abrasive cleaners, waxes, or solvents.
- Ensure no liquids enter the unit.
2. Disc Care
- Handle discs by their edges to avoid fingerprints on the playing surface.
- Clean discs with a soft, lint-free cloth, wiping from the center outwards.
- Store discs in their cases away from direct sunlight and heat.
Troubleshooting
If you encounter issues with your CLD-C3, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord disconnected; power outlet faulty | Check power cord connection; try a different outlet |
| No picture | Video cables incorrectly connected; TV input not selected | Verify video cable connections; select correct input on TV |
| No sound | Audio cables incorrectly connected; amplifier input not selected | Verify audio cable connections; select correct input on amplifier |
| Disc does not play | Disc dirty or scratched; disc inserted incorrectly; unit not in play mode | Clean disc; reinsert disc correctly; press PLAY button |
| Remote control not working | Batteries depleted; obstruction between remote and unit | Replace batteries; remove obstructions; ensure line of sight |
Specifications
| Feature | Description |
|---|---|
| Format | LaserDisc system and Compact Disc digital audio system |
| Laser | Semiconductor laser: Wavelength 780nm |
| Power Requirements | AC100V, 50/60Hz |
| Power Consumption | 27W |
| Dimensions (W x D x H) | 420mm x 399mm x 132mm |
| Weight | 6.6kg |
| S-Video Output (1 system) | Y output level: 1Vp-p (75Ω), C output level: 286mVp-p (75Ω), Output terminal: S terminal |
| Video Output (2 systems) | Output level: 1Vp-p (75Ω load, synchronous load), Output terminal: Pin jack |
| Audio Output (2 systems) | Analog audio output: 200mVrms (1KHz, 40%), Digital audio output: 200mVrms (1KHz, -20dB), Number of channels: 2 channels |
| Digital Audio Characteristics | Frequency characteristics: 4Hz to 20kHz, S/N ratio: 115dB, Dynamic range: 96dB (EIAJ), Total harmonic distortion: 0.0035% or less, Wow and flutter: Below measurement limit (0.001% W.PEAK) (EIAJ) |
Warranty and Support
For warranty information and customer support, please refer to the separate warranty card included with your product or visit the official Pioneer website. Keep your purchase receipt as proof of purchase.
Pioneer Official Website: www.pioneer-audiovisual.com
