Introduction
Thank you for choosing the Baseus Super Quick Charger 20W Type-C Wall Charger. This compact and powerful charger is designed to provide efficient and rapid charging for a wide range of devices, including iPhones, Android smartphones, and tablets. Featuring advanced Super Si technology and comprehensive protection mechanisms, it ensures stable and safe power delivery. Please read this manual carefully before use to ensure optimal performance and safety.
Safety Information
To prevent injury or damage to your device, please observe the following safety precautions:
- Do not expose the charger to water, moisture, or extreme temperatures.
- Avoid dropping, disassembling, or attempting to repair the charger yourself.
- Ensure the power outlet voltage is compatible with the charger's input specifications (AC 100-240V).
- Unplug the charger from the power outlet when not in use or during electrical storms.
- Keep out of reach of children.
- Do not use if the charger or cable is damaged.
This charger incorporates multiple protection features, including over-voltage, over-current, over-power, electrostatic, short-circuit, and temperature protection, to ensure safe operation.
Image: Automatic Pressure Load Monitoring icons illustrating the charger's comprehensive safety features.
Package Contents
Please check the package for the following items:
- 1 x Baseus Super Quick Charger 20W Type-C Wall Charger (Model: CCSUP-B01)
- 1 x User Manual (this document)
Note: Charging cables are typically sold separately and are not included with the charger.
Setup
Setting up your Baseus Super Quick Charger is straightforward:
- Unpack the Charger: Carefully remove the charger from its packaging.
- Inspect for Damage: Before first use, visually inspect the charger for any signs of physical damage. If damaged, do not use it and contact customer support.
- Connect a Compatible Cable: Insert a compatible USB-C charging cable (not included) into the USB-C port on the charger. Ensure the cable is fully inserted.
- Plug into Power Outlet: Insert the charger's prongs firmly into a standard wall power outlet (AC 100-240V).
Image: Front view of the Baseus 20W Type-C Wall Charger.
Image: The charger connected to a power outlet and a smartphone.
Operating Instructions
Once the charger is plugged into a power outlet and a compatible cable is connected, you can begin charging your devices:
- Connect Your Device: Plug the other end of the USB-C charging cable into your smartphone, tablet, or other compatible device.
- Initiate Charging: Your device should automatically begin charging. The charger will intelligently detect the connected device and deliver the optimal charging speed, up to 20W, utilizing Power Delivery (PD) and Quick Charge 3.0 technologies.
- Monitor Charging: You can monitor the charging status on your device's screen.
- Disconnect After Charging: Once your device is fully charged, disconnect the cable from your device, then unplug the charger from the wall outlet.
The charger's Super Si technology ensures stable and reliable operation, contributing to its overall lifespan and efficient heat dissipation.
Image: Internal view highlighting Baseus Super Si Black Technology.
Maintenance
Proper care and maintenance will extend the life of your charger:
- Cleaning: Use a soft, dry cloth to clean the surface of the charger. Do not use liquid cleaners or aerosols.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid bending or twisting the charging cable excessively, as this can damage the internal wires.
- Disconnection: Always pull the plug directly from the outlet and the device, rather than pulling on the cable.
Troubleshooting
If you encounter issues with your Baseus Super Quick Charger, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not working / Device not charging. |
|
|
| Slow charging. |
|
|
| Charger feels warm during use. |
|
|
If the problem persists after trying these solutions, please contact Baseus customer support.
Specifications
| Brand | Baseus |
| Model | CCSUP-B01 |
| Product Type | Wall Charger |
| Color | Black |
| Material | Plastic |
| Input Voltage | AC 100-240V, 50/60Hz, 0.8A Max |
| Output (Type-C) | 5.0V=3.0A (15.0W) 9.0V=2.0A (18.0W) 9.0V=2.22A (20.0W) 12.0V=1.6A (19.2W) 15.0V=1.3A (19.5W) |
| Total USB Ports | 1 (USB Type-C) |
| Special Features | 20W Power Delivery, Quick Charge 3.0, Super Si Technology, Multi-protection |
| Compatible Devices | Mobile phones (iPhone 14/13/12/11, iPad, Samsung, Moto, Xiaomi, etc.) |
| Product Dimensions | 4 x 10 x 10 cm |
| Product Weight | 70 g |
| Certification | ANATEL: 052141912184 |
Image: Detailed specifications printed on the charger.
Warranty and Support
Warranty: This product comes with a manufacturer's warranty of 1 year from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or external causes.
Customer Support: For technical assistance, warranty claims, or any questions regarding your Baseus Super Quick Charger, please contact Baseus customer support through their official website or the retailer where you purchased the product. Please have your proof of purchase and the product model number (CCSUP-B01) ready when contacting support.
You can visit the official Baseus store on Amazon for more information: Baseus Official Store
