PowerStar YB16CL-B Jet Ski Battery User Manual

Product Overview

The PowerStar YB16CL-B is a high-performance, maintenance-free AGM (Absorbed Glass Mat) rechargeable power sport battery designed for various applications including motorcycles, ATVs, snowmobiles, and watercraft. This sealed battery prevents corrosion and does not require acid addition, offering a reliable and spill-proof power solution.

Figure 1: PowerStar YB16CL-B PS-625 Motorcycle Battery. This image shows the main product, a black rectangular battery with PowerStar branding and terminal posts.

Safety Information

Always prioritize safety when handling batteries. Batteries contain lead and lead compounds, and battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wash hands after handling.

• Eye Protection: Always wear shield eyes to prevent injury from explosive gases or sparks.
• Ventilation: Ensure adequate ventilation to avoid accumulation of explosive gases.
• No Sparks/Flames/Smoking: Keep away from ignition sources.
• Sulfuric Acid: Battery contains sulfuric acid. Contact can cause blindness or severe burns. In case of contact, flush eyes immediately with water and seek medical help.
• Handling: Do not tip or open the battery. Read all instructions before use.
• Disposal: Do not disassemble, heat above 60°C, or incinerate. Follow local regulations for battery disposal.

Figure 2: Safety and Warning Label. This image displays the warning label found on the battery, detailing precautions for handling, chemical exposure, and disposal.

Setup and Installation

The PowerStar YB16CL-B battery is designed for easy installation as a compatible OEM replacement. It is a sealed, maintenance-free unit, meaning no initial acid filling or regular water top-ups are required.

Pre-Installation Check:

1. Inspect Battery: Before installation, visually inspect the battery for any signs of damage.
2. Verify Compatibility: Ensure the battery dimensions (L=6.82", W=3.88", H=6.00") and specifications (12V 19AH 260CCA) match your vehicle's requirements.
3. Charge Level: Although factory-charged, it is recommended to check the battery's voltage before first use. If below 12.6V, charge it using a compatible battery charger.

Installation Steps:

1. Disconnect Old Battery: Always disconnect the negative (-) terminal first, followed by the positive (+) terminal of the old battery.
2. Clean Battery Tray: Clean the battery tray and terminal cables to remove any corrosion or debris.
3. Position New Battery: Place the PowerStar YB16CL-B battery securely in the battery tray. This battery is designed to operate in any position due to its sealed AGM technology.
4. Connect Terminals: Connect the positive (+) terminal first, then the negative (-) terminal. Ensure connections are tight and secure.
5. Install Protective Caps: Place the protective terminal caps over the terminals to prevent accidental short circuits.

Figure 3: Protective Terminal Caps. This image highlights the protective caps that should be placed over the battery terminals after installation to ensure safety and prevent short circuits.

Figure 4: Battery Dimensions. This diagram illustrates the precise dimensions of the PowerStar YB16CL-B battery: Length = 6.82 inches, Width = 3.88 inches, Height = 6.00 inches.

Operating Guidelines

The PowerStar YB16CL-B battery is designed for reliable operation in various power sport vehicles. Its AGM technology provides excellent performance, including resistance to shock, vibration, and heat.

• Vehicle Compatibility: This battery is a direct replacement for models such as PC-625, UT16CL, UB16CL-B, CB16CL-B, AB16CLB, ATX16CLBBS, ADX16CLBBS, YB16CL-B, YTX19L-BS, and others. It is suitable for Motorcycles, ATVs, Snow Mobiles, and Watercraft.
• Performance: Provides 12V nominal voltage, 19 Amp-hours (AH) capacity, and 260 Cold Cranking Amps (CCA) for strong starting power.
• Temperature Range: Designed to perform across a wide range of temperatures. For optimal performance in extreme cold, ensure the battery is fully charged.

Figure 5: Key Battery Specifications. This image visually presents the battery's weight (14.43 lbs), voltage (12 volts), Cold Cranking Amps (260 CCA), and capacity (19 AH).

Figure 6: Absorbed Glass Mat (AGM) Technology. This image illustrates the durability of AGM technology, highlighting its resistance to shock, vibration, and heat, and its leak-resistant design.

Maintenance

The PowerStar YB16CL-B is a maintenance-free battery. This means it does not require regular water top-ups or specific gravity checks. However, proper care can extend its lifespan.

• Keep Clean: Periodically clean the battery top and terminals to prevent dirt and corrosion buildup. Use a damp cloth and ensure terminals are dry after cleaning.
• Terminal Connections: Ensure terminal connections remain tight. Loose connections can lead to poor performance and heat buildup.
• Charging: If the vehicle is stored for extended periods, especially in cold conditions, use a compatible battery maintainer or charger to keep the battery fully charged. Avoid overcharging.
• Storage: Store the battery in a cool, dry place when not in use. A fully charged battery will resist freezing better than a discharged one.

Troubleshooting

If you experience issues with your PowerStar YB16CL-B battery, consider the following common problems and solutions:

If troubleshooting steps do not resolve the issue, consult a qualified technician or contact PowerStar customer support.

Specifications

Warranty and Support

PowerStar batteries come with a 2-Year Free Replacement Warranty. For warranty claims or technical support, please contact PowerStar customer service directly. Refer to your purchase documentation for specific contact details or visit the official PowerStar website.

Manufacturer: BatteryJack Inc

Date First Available: July 31, 2014